[Mon Aug 26 07:19:09 2013] Detection parameters:
  Position = (446.1, 229.0) = 2 28 30.38 31 34 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23034.9 +/- 181.9
  Background counts = 42.8
  Rate = 0.6 +/- 0.004

[Mon Aug 26 07:19:11 2013] Off-axis axis estimate = 11.83'
[Mon Aug 26 07:21:14 2013] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Mon Aug 26 07:21:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 26 07:21:14 2013] Initial guess for spatial extent in simple fitting = 12.34"
[Mon Aug 26 07:21:14 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.808
[Mon Aug 26 07:21:14 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.34"
[Mon Aug 26 08:33:05 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 26 08:33:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src1.csv
[Mon Aug 26 08:33:05 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 26 08:33:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src1.csv
[Mon Aug 26 08:33:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 26 08:33:06 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 26 08:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Aug 26 08:33:06 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 26 08:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Aug 26 08:33:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 26 09:23:58 2013] Warning, spatial fit 1 centroid is now closest to src. 3
[Mon Aug 26 09:23:58 2013] Spatial fit model total counts = 1636.200000, observed total counts = 5662.000000
[Mon Aug 26 09:23:58 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 26 09:23:58 2013] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.231936 pixels away
[Mon Aug 26 09:23:58 2013] Vigneting correction estimate = 1.000000
[Mon Aug 26 09:23:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 26 09:23:58 2013] Assessing source extent using major
[Mon Aug 26 09:23:58 2013] Source does appear to be extended
[Mon Aug 26 09:23:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 26 09:24:16 2013] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Mon Aug 26 09:24:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 26 09:24:16 2013] Initial guess for spatial extent in simple fitting = 12.34"
[Mon Aug 26 09:24:16 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.808
[Mon Aug 26 09:24:16 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.34"
[Mon Aug 26 10:39:03 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 26 10:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src1.csv
[Mon Aug 26 10:39:03 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 26 10:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src1.csv
[Mon Aug 26 10:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 26 10:39:03 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 26 10:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 26 10:39:03 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 26 10:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 26 10:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 26 11:23:47 2013] Warning, spatial fit 1 centroid is now closest to src. 3
[Mon Aug 26 11:23:47 2013] Spatial fit model total counts = 5652.230000, observed total counts = 5662.000000
[Mon Aug 26 11:23:47 2013] Offset between fit and detection position for source 2 = 0.473002 pixels
[Mon Aug 26 11:23:47 2013] Warning, changing simple spatial fit ID from 1 to 2
[Mon Aug 26 11:23:47 2013] 6168.330000 total counts/ 2581.620000 bgd. counts: snr = 70.591125
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.473002 pixels
  Position = (446.3, 229.5) = 2 28 30.32 31 34 28.2
  Extent = 11.5 (11.1-11.8)" x 5.0 (4.9-5.3)", rotation angle = 122 (122-124) degrees
  Source counts = 3586.7 +/- 78.5
  Background counts = 2581.6
  Rate = 0.09 +/- 0.002
[Mon Aug 26 11:23:47 2013] Vigneting correction estimate = 1.000000
[Mon Aug 26 11:23:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 26 11:23:47 2013] Assessing source extent using major axis lower bound
[Mon Aug 26 11:23:47 2013] Source does appear to be extended
[Mon Aug 26 11:23:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.11
[Mon Aug 26 11:23:47 2013] Source is asymmetric
[Mon Aug 26 11:23:47 2013] Source is confused with source 21
[Mon Aug 26 11:24:04 2013] Counts = 3586.710000, rescaling region sizes by 2.000000
[Mon Aug 26 11:24:04 2013] XMMSAS src. selection expression = ellipse(38781.568000, 19915.002000, 1377.720040, 601.388417, 122.497500, X, Y)
[Mon Aug 26 11:24:04 2013] Writing source region out to fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src2_src.reg
[Mon Aug 26 11:24:04 2013] Extracting stamp from image fullrun_pn_xmm0693970301_pi300-10000_cl_sm2.00.img.gz, (367, 150) - (526, 309)
[Mon Aug 26 11:24:04 2013] XMMSAS bgd. selection expression = annulus(38781.568000, 19915.002000, 4592.400132, 9184.800264, X, Y) && !ellipse(38207.904755, 18984.471786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31571.717438, 18231.157669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30646.155640, 11366.521011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30488.091125, 20578.231445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40315.030400, 25009.640320, 2504.872072, 496.075214, 105.307300, X, Y) && !ellipse(41994.534200, 30178.365800, 2417.552070, 302.194409, 107.010200, X, Y) && !ellipse(38671.920000, 20769.130000, 1767.672051, 1767.672051, 0.000000, X, Y) && !ellipse(28831.846680, 28339.107758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41395.097504, 28309.002380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40972.512421, 26814.005829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40593.443000, 25802.884000, 2018.656058, 395.901611, 111.580600, X, Y) && !ellipse(40275.997200, 24935.798000, 1985.712057, 518.321615, 102.016600, X, Y) && !ellipse(30543.594513, 23411.450378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39835.072600, 23123.152000, 1971.896057, 910.368026, 317.862000, X, Y) && !ellipse(32201.694824, 22153.773621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39700.156006, 21605.553879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33245.820000, 20879.382000, 3309.360095, 3309.360095, 0.000000, X, Y) && !ellipse(32402.960000, 19371.480000, 1654.680048, 1654.680048, 0.000000, X, Y) && !ellipse(33104.676400, 18540.525800, 373.473611, 373.473611, 0.000000, X, Y) && !ellipse(30895.638123, 18379.551239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29644.192719, 17612.335388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31990.460400, 15387.886200, 571.304016, 290.711208, 310.378801, X, Y)
[Mon Aug 26 11:24:04 2013] Writing fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src2.gif
[Mon Aug 26 11:26:42 2013] Mean detx,y = (-15097.38, -411.42) 
[Mon Aug 26 11:26:46 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 26 11:27:41 2013] Binned source spectrum to 10 counts/bin
[Mon Aug 26 11:27:42 2013] Setting source spectrum file to fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Aug 26 11:27:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Aug 26 13:13:33 2013] Updating aperture counts using extracted products
[Mon Aug 26 13:13:33 2013] Total counts from fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 20966.00
[Mon Aug 26 13:13:33 2013] Total counts from fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 15731.00
[Mon Aug 26 13:13:33 2013] Got source and background scale factors 2313703.000000, 86765454.000000
[Mon Aug 26 13:13:33 2013] User source parameters:
  Position = (446.3, 229.5) = 2 28 30.32 31 34 28.2
  Extent = 11.5 (11.1-11.8)" x 5.0 (4.9-5.3)", rotation angle = 122 (122-124) degrees
  Source aperture counts = 20546.5 +/- 145.8
  Background aperture counts = 419.5
  Rate = 0.5 +/- 0.004

[Mon Aug 26 13:13:42 2013] Calculating source flux in energy range 0.30-8.00
[Mon Aug 26 13:13:42 2013] Using photon index=1.80, rate=0.0874, arf fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src2.arf
[Mon Aug 26 13:13:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 26 13:13:42 2013] Updating source flux to 7.6e-13
[Mon Aug 26 13:13:55 2013] Flag p found in src. 2 procflags, skipping spectral fitting
[Mon Aug 26 13:13:55 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Aug 26 13:14:00 2013] xmm0693970301/analysis//spectral/fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete