[Tue Jun 18 07:54:12 2013] Detection parameters:
  Position = (233.0, 390.2) = 22 15 13.31 -13 53 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.4 +/- 14.3
  Background counts = 31.9
  Rate = 0.009 +/- 0.001

[Tue Jun 18 07:54:13 2013] Off-axis axis estimate = 8.17'
[Tue Jun 18 07:56:51 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 07:56:51 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Tue Jun 18 07:56:51 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.058
[Tue Jun 18 07:56:51 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.51"
[Tue Jun 18 08:52:24 2013] fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jun 18 08:52:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_src6.csv
[Tue Jun 18 08:52:24 2013] fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jun 18 08:52:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_src6.csv
[Tue Jun 18 08:52:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 08:52:25 2013] fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jun 18 08:52:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 18 08:52:25 2013] fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jun 18 08:52:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 18 08:52:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693661901_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 10:23:16 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.132947 pixels away
[Tue Jun 18 10:23:16 2013] Source 6 is offset by 6.322192 and 0.902036 pixels which is larger than
2 X fitted extent = 1.164635 x 1.164635, not incorporating fit results
[Tue Jun 18 10:23:16 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 10:23:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 10:23:16 2013] Assessing source extent using major
[Tue Jun 18 10:23:16 2013] Source does appear to be extended
[Tue Jun 18 10:23:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 10:23:46 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 10:23:46 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Tue Jun 18 10:23:46 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.058
[Tue Jun 18 10:23:46 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.51"
[Tue Jun 18 11:17:35 2013] fullrun_pn_xmm0693661901_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jun 18 11:17:35 2013] fullrun_pn_xmm0693661901_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jun 18 11:17:35 2013] Fit fullrun_pn_xmm0693661901_pi300-10000_cl_pass1_src6 appears to have run properly
[Tue Jun 18 11:17:35 2013] fullrun_pn_xmm0693661901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jun 18 11:17:35 2013] fullrun_pn_xmm0693661901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jun 18 11:17:35 2013] Fit fullrun_pn_xmm0693661901_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Jun 18 12:44:31 2013] Spatial fit model total counts = 472.907000, observed total counts = 436.000000
[Tue Jun 18 12:44:31 2013] Offset between fit and detection position for source 6 = 0.322103 pixels
[Tue Jun 18 12:44:31 2013] 461.681700 total counts/ 408.546000 bgd. counts: snr = 2.628851
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.322103 pixels
  Position = (232.8, 390.5) = 22 15 13.36 -13 53 44.0
  Extent = 4.7 (3.3-6.6)", rotation angle = 0
  Source counts = 53.1 +/- 21.5
  Background counts = 408.5
  Rate = 0.003 +/- 0.001
[Tue Jun 18 12:44:31 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 12:44:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 12:44:31 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 12:44:31 2013] Source does appear to be extended
[Tue Jun 18 12:44:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 12:44:47 2013] XMMSAS src. selection expression = ellipse(20206.236420, 33923.060200, 284.832008, 284.832008, 0.000000, X, Y)
[Tue Jun 18 12:44:47 2013] Writing source region out to fullrun_pn_xmm0693661901_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun 18 12:44:47 2013] Extracting stamp from image fullrun_pn_xmm0693661901_pi300-10000_cl_sm2.00.img.gz, (216, 374) - (249, 407)
[Tue Jun 18 12:44:47 2013] XMMSAS bgd. selection expression = annulus(20206.236420, 33923.060200, 474.720014, 949.440027, X, Y) && !ellipse(20545.171021, 32998.870026, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 12:44:47 2013] Writing fullrun_pn_xmm0693661901_pi300-10000_pass1_cl_src6.gif
[Tue Jun 18 12:52:12 2013] Mean detx,y = (6954.88, 7162.14) 
[Tue Jun 18 12:52:15 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 12:52:28 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 12:52:28 2013] Setting source spectrum file to fullrun_pn_xmm0693661901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 18 12:52:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693661901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 18 13:10:22 2013] Not generating rmf since there are only 53 counts
[Tue Jun 18 13:10:22 2013] rmf not generated due to insufficient counts
[Tue Jun 18 14:00:05 2013] Updating aperture counts using extracted products
[Tue Jun 18 14:00:05 2013] Total counts from fullrun_pn_xmm0693661901_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 107.00
[Tue Jun 18 14:00:05 2013] Total counts from fullrun_pn_xmm0693661901_pi300-10000_pass1_cl_src6_bgd.pi.gz = 225.00
[Tue Jun 18 14:00:05 2013] Got source and background scale factors 252800.000000, 1133235.000000
[Tue Jun 18 14:00:05 2013] User source parameters:
  Position = (232.8, 390.5) = 22 15 13.36 -13 53 44.0
  Extent = 4.7 (3.3-6.6)", rotation angle = 0
  Source aperture counts = 56.8 +/- 11.4
  Background aperture counts = 50.2
  Rate = 0.003 +/- 0.0006

[Tue Jun 18 14:00:10 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 14:00:10 2013] Using photon index=1.80, rate=0.00273, arf fullrun_pn_xmm0693661901_pi300-10000_pass1_cl_src6.arf
[Tue Jun 18 14:00:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 14:00:10 2013] Updating source flux to 1.6e-14
[Tue Jun 18 14:00:21 2013] Flag b found in src. 6 procflags, skipping spectral fitting
[Tue Jun 18 14:00:21 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 18 14:00:23 2013] xmm0693661901/analysis//spectral/fullrun_pn_xmm0693661901_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete