[Wed Aug 28 09:53:38 2013] Detection parameters:
  Position = (286.4, 318.9) = 3 35 51.34 -6 57 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.1 +/- 10.5
  Background counts = 26.1
  Rate = 0.0009 +/- 0.0002

[Wed Aug 28 09:53:38 2013] Off-axis axis estimate = 1.72'
[Wed Aug 28 12:44:52 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Aug 28 12:44:52 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Aug 28 12:44:52 2013] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.898
[Wed Aug 28 12:44:52 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 7.29"
[Wed Aug 28 14:15:25 2013] fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_src60.ximg exists
[Wed Aug 28 14:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_src60.csv
[Wed Aug 28 14:15:25 2013] fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_src60_1.ximg exists
[Wed Aug 28 14:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_src60.csv
[Wed Aug 28 14:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 28 14:15:25 2013] fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Wed Aug 28 14:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_tfrozen_src60.csv
[Wed Aug 28 14:15:25 2013] fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Wed Aug 28 14:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_tfrozen_src60.csv
[Wed Aug 28 14:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693661501_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 28 14:15:57 2013] Source 38 is offset by 0.497695 and 2.823381 pixels which is larger than
2 X fitted extent = 6.918115 x 0.864768, not incorporating fit results
[Wed Aug 28 14:15:57 2013] Source 38 is offset by -6.286742 and -6.008435 pixels which is larger than
2 X fitted extent = 0.837821 x 0.837821, not incorporating fit results
[Wed Aug 28 14:15:57 2013] Vigneting correction estimate = 1.000000
[Wed Aug 28 14:15:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 28 14:15:57 2013] Assessing source extent using major
[Wed Aug 28 14:15:57 2013] Source does appear to be extended
[Wed Aug 28 14:15:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 28 16:39:14 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Aug 28 16:39:14 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Aug 28 16:39:14 2013] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.898
[Wed Aug 28 16:39:14 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 7.29"
[Wed Aug 28 18:07:52 2013] fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_src57.ximg exists
[Wed Aug 28 18:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_src57.csv
[Wed Aug 28 18:07:52 2013] fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_src57_1.ximg exists
[Wed Aug 28 18:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_src57.csv
[Wed Aug 28 18:07:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 28 18:07:53 2013] fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Wed Aug 28 18:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_tfrozen_src57.csv
[Wed Aug 28 18:07:53 2013] fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Wed Aug 28 18:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_tfrozen_src57.csv
[Wed Aug 28 18:07:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693661501_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 28 18:08:22 2013] Source 38 is offset by -6.286742 and -6.103585 pixels which is larger than
2 X fitted extent = 0.837821 x 0.837821, not incorporating fit results
[Wed Aug 28 18:08:22 2013] Vigneting correction estimate = 1.000000
[Wed Aug 28 18:08:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 28 18:08:22 2013] Assessing source extent using major
[Wed Aug 28 18:08:22 2013] Source does appear to be extended
[Wed Aug 28 18:08:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 28 19:50:04 2013] XMMSAS src. selection expression = ellipse(24869.677429, 27696.256134, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 28 19:50:04 2013] Writing source region out to fullrun_mos2_xmm0693661501_pi300-10000_pass1_cl_src38_src.reg
[Wed Aug 28 19:50:04 2013] Extracting stamp from image fullrun_mos2_xmm0693661501_pi300-10000_cl_sm2.00.img.gz, (249, 281) - (324, 356)
[Wed Aug 28 19:50:04 2013] XMMSAS bgd. selection expression = annulus(24869.677429, 27696.256134, 1087.500000, 2175.000000, X, Y) && !ellipse(23766.606000, 25946.614000, 380.624011, 380.624011, 0.000000, X, Y) && !ellipse(26427.136200, 29789.770630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23106.545600, 27558.828800, 1247.872036, 911.456026, 76.008200, X, Y) && !ellipse(24743.046000, 25613.315700, 1092.656031, 1092.656031, 0.000000, X, Y) && !ellipse(24546.610809, 26840.630463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24428.953186, 25781.727783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23079.872000, 27394.452000, 1203.368035, 1203.368035, 0.000000, X, Y) && !ellipse(24181.084961, 27362.789764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23443.914880, 30065.046400, 427.156012, 427.156012, 0.000000, X, Y) && !ellipse(25433.358734, 24922.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25673.819427, 25874.637878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22302.884000, 26198.874000, 1233.232035, 1233.232035, 0.000000, X, Y) && !ellipse(23174.242096, 26226.291199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22772.194000, 28186.526000, 2406.736069, 2406.736069, 0.000000, X, Y) && !ellipse(24283.500061, 25015.488983, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 28 19:50:04 2013] Writing fullrun_mos2_xmm0693661501_pi300-10000_pass1_cl_src38.gif
[Wed Aug 28 20:00:23 2013] Mean detx,y = (-269.82, -3044.18) 
[Wed Aug 28 20:00:24 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 28 20:00:29 2013] Binned source spectrum to 10 counts/bin
[Wed Aug 28 20:00:29 2013] Setting source spectrum file to fullrun_mos2_xmm0693661501_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Aug 28 20:00:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693661501_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Wed Aug 28 20:43:16 2013] Not generating rmf since there are only 44 counts
[Wed Aug 28 20:43:16 2013] rmf not generated due to insufficient counts
[Wed Aug 28 21:01:56 2013] Updating aperture counts using extracted products
[Wed Aug 28 21:01:56 2013] Total counts from fullrun_mos2_xmm0693661501_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 311.00
[Wed Aug 28 21:01:56 2013] Total counts from fullrun_mos2_xmm0693661501_pi300-10000_pass1_cl_src38_bgd.pi.gz = 486.00
[Wed Aug 28 21:01:57 2013] Got source and background scale factors 1190128.000000, 3650008.000000
[Wed Aug 28 21:01:57 2013] User source parameters:
  Position = (286.4, 318.9) = 3 35 51.34 -6 57 12.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 152.5 +/- 18.7
  Background aperture counts = 158.5
  Rate = 0.003 +/- 0.0003

[Wed Aug 28 21:01:57 2013] Updating counts from extracted products
[Wed Aug 28 21:01:57 2013] Set source signif. to 152.53/12.59 = 12.12
[Wed Aug 28 21:01:58 2013] Calculating source flux in energy range 0.30-8.00
[Wed Aug 28 21:01:58 2013] Using photon index=1.80, rate=0.00275, arf fullrun_mos2_xmm0693661501_pi300-10000_pass1_cl_src38.arf
[Wed Aug 28 21:01:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 28 21:01:58 2013] Updating source flux to 2.8e-14
[Wed Aug 28 21:02:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 28 21:02:09 2013] xmm0693661501/analysis//spectral/fullrun_mos2_xmm0693661501_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete