[Mon Aug  5 03:49:43 2013] Detection parameters:
  Position = (295.4, 321.8) = 15 18 24.37 29 28 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.7 +/- 10.3
  Background counts = 14.1
  Rate = 0.001 +/- 0.0003

[Mon Aug  5 03:49:43 2013] Off-axis axis estimate = 1.71'
[Mon Aug  5 04:53:01 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Aug  5 04:53:01 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Aug  5 04:53:01 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Mon Aug  5 04:53:01 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.28"
[Mon Aug  5 05:46:06 2013] fullrun_mos2_xmm0693661101_pi300-10000_cl_pass0_src29.ximg exists
[Mon Aug  5 05:46:06 2013] fullrun_mos2_xmm0693661101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Aug  5 05:46:06 2013] Fit fullrun_mos2_xmm0693661101_pi300-10000_cl_pass0_src29 appears to have run properly
[Mon Aug  5 05:46:06 2013] fullrun_mos2_xmm0693661101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Aug  5 05:46:06 2013] fullrun_mos2_xmm0693661101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Aug  5 05:46:06 2013] Fit fullrun_mos2_xmm0693661101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Aug  5 05:46:24 2013] Spatial fit model total counts = 402.969000, observed total counts = 404.000000
[Mon Aug  5 05:46:24 2013] Offset between fit and detection position for source 19 = 8.324009 pixels
[Mon Aug  5 05:46:24 2013] 389.701800 total counts/ 344.940000 bgd. counts: snr = 2.410104
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 8.324009 pixels
  Position = (300.5, 315.3) = 15 18 22.65 29 28 21.0
  Extent = 14.6 (14.5-29.1)", rotation angle = 0
  Source counts = 44.8 +/- 19.7
  Background counts = 344.9
  Rate = 0.001 +/- 0.0006
[Mon Aug  5 05:46:24 2013] Vigneting correction estimate = 1.000000
[Mon Aug  5 05:46:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  5 05:46:24 2013] Assessing source extent using major axis lower bound
[Mon Aug  5 05:46:24 2013] Source does appear to be extended
[Mon Aug  5 05:46:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  5 05:46:24 2013] Source is confused with source 22
[Mon Aug  5 06:53:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug  5 06:53:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug  5 06:53:18 2013] Initial guess for spatial extent in simple fitting = 14.57"
[Mon Aug  5 06:53:18 2013] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.945
[Mon Aug  5 06:53:18 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 14.57"
[Mon Aug  5 07:41:25 2013] fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_src27.ximg exists
[Mon Aug  5 07:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_src27.csv
[Mon Aug  5 07:41:25 2013] fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Aug  5 07:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_src27.csv
[Mon Aug  5 07:41:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  5 07:41:25 2013] fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Aug  5 07:41:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Aug  5 07:41:26 2013] fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Aug  5 07:41:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Aug  5 07:41:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693661101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  5 07:41:43 2013] Warning, spatial fit 27 centroid is now closest to src. 22
[Mon Aug  5 07:41:43 2013] Vigneting correction estimate = 1.000000
[Mon Aug  5 07:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  5 07:41:43 2013] Assessing source extent using major axis lower bound
[Mon Aug  5 07:41:43 2013] Source does appear to be extended
[Mon Aug  5 07:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  5 08:26:43 2013] XMMSAS src. selection expression = ellipse(26098.058000, 27382.808000, 874.038025, 874.038025, 0.000000, X, Y)
[Mon Aug  5 08:26:43 2013] Writing source region out to fullrun_mos2_xmm0693661101_pi300-10000_pass1_cl_src19_src.reg
[Mon Aug  5 08:26:43 2013] Extracting stamp from image fullrun_mos2_xmm0693661101_pi300-10000_cl_sm2.00.img.gz, (250, 265) - (351, 366)
[Mon Aug  5 08:26:43 2013] XMMSAS bgd. selection expression = annulus(26098.058000, 27382.808000, 1456.730042, 2913.460084, X, Y) && !ellipse(26573.931526, 26470.932000, 1086.896031, 799.042423, 72.779300, X, Y) && !ellipse(27629.341431, 27282.169800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.473236, 27093.046753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.368866, 26832.723785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27606.709961, 28035.175934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25482.038696, 26078.865387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25809.050690, 25118.440399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.166626, 26417.047089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24742.743134, 26874.296234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25388.026764, 24854.628723, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug  5 08:26:43 2013] Writing fullrun_mos2_xmm0693661101_pi300-10000_pass1_cl_src19.gif
[Mon Aug  5 08:33:25 2013] Mean detx,y = (383.56, -710.01) 
[Mon Aug  5 08:33:26 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Aug  5 08:33:32 2013] Binned source spectrum to 10 counts/bin
[Mon Aug  5 08:33:32 2013] Setting source spectrum file to fullrun_mos2_xmm0693661101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Aug  5 08:33:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693661101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Aug  5 08:45:43 2013] Not generating rmf since there are only 44 counts
[Mon Aug  5 08:45:43 2013] rmf not generated due to insufficient counts
[Mon Aug  5 08:46:59 2013] Updating aperture counts using extracted products
[Mon Aug  5 08:46:59 2013] Total counts from fullrun_mos2_xmm0693661101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 1669.00
[Mon Aug  5 08:46:59 2013] Total counts from fullrun_mos2_xmm0693661101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 1246.00
[Mon Aug  5 08:46:59 2013] Got source and background scale factors 2406400.000000, 10977240.000000
[Mon Aug  5 08:46:59 2013] User source parameters:
  Position = (300.5, 315.3) = 15 18 22.65 29 28 21.0
  Extent = 14.6 (14.5-29.1)", rotation angle = 0
  Source aperture counts = 1395.9 +/- 41.9
  Background aperture counts = 273.1
  Rate = 0.04 +/- 0.001

[Mon Aug  5 08:47:01 2013] Calculating source flux in energy range 0.30-8.00
[Mon Aug  5 08:47:01 2013] Using photon index=1.80, rate=0.00142, arf fullrun_mos2_xmm0693661101_pi300-10000_pass1_cl_src19.arf
[Mon Aug  5 08:47:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug  5 08:47:01 2013] Updating source flux to 1.5e-14
[Mon Aug  5 08:47:04 2013] Flag c found in src. 19 procflags, skipping spectral fitting
[Mon Aug  5 08:47:04 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug  5 08:47:06 2013] xmm0693661101/analysis//spectral/fullrun_mos2_xmm0693661101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete