[Mon Jul 15 07:09:05 2013] Detection parameters:
  Position = (318.2, 312.2) = 14 20 36.15 39 55 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.9 +/- 12.4
  Background counts = 9.3
  Rate = 0.004 +/- 0.0005

[Mon Jul 15 07:09:06 2013] Off-axis axis estimate = 1.74'
[Mon Jul 15 09:00:20 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Jul 15 09:00:20 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Jul 15 09:00:20 2013] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.685
[Mon Jul 15 09:00:20 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.30"
[Mon Jul 15 09:54:11 2013] fullrun_mos2_xmm0693661001_pi300-10000_cl_pass0_src12.ximg exists
[Mon Jul 15 09:54:11 2013] fullrun_mos2_xmm0693661001_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Jul 15 09:54:11 2013] Fit fullrun_mos2_xmm0693661001_pi300-10000_cl_pass0_src12 appears to have run properly
[Mon Jul 15 09:54:11 2013] fullrun_mos2_xmm0693661001_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Jul 15 09:54:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661001_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jul 15 09:54:11 2013] fullrun_mos2_xmm0693661001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jul 15 09:54:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661001_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jul 15 09:54:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693661001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693661001_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 15 09:54:32 2013] Warning, spatial fit 12 centroid is now closest to src. 20
[Mon Jul 15 09:54:32 2013] Source 19 is offset by -1.264975 and 0.685884 pixels which is larger than
2 X fitted extent = 0.861370 x 0.861370, not incorporating fit results
[Mon Jul 15 09:54:32 2013] Vigneting correction estimate = 1.000000
[Mon Jul 15 09:54:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 15 09:54:32 2013] Assessing source extent using major
[Mon Jul 15 09:54:32 2013] Source does appear to be extended
[Mon Jul 15 09:54:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 15 11:52:13 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Jul 15 11:52:13 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Jul 15 11:52:13 2013] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.685
[Mon Jul 15 11:52:13 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.30"
[Mon Jul 15 12:34:14 2013] fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_src12.ximg exists
[Mon Jul 15 12:34:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_src12.csv
[Mon Jul 15 12:34:14 2013] fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Jul 15 12:34:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_src12.csv
[Mon Jul 15 12:34:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 15 12:34:14 2013] fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Jul 15 12:34:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon Jul 15 12:34:14 2013] fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jul 15 12:34:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon Jul 15 12:34:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693661001_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 15 12:34:34 2013] Warning, spatial fit 12 centroid is now closest to src. 2
[Mon Jul 15 12:34:34 2013] Source 19 is offset by -0.929067 and 3.660005 pixels which is larger than
2 X fitted extent = 0.861090 x 0.861090, not incorporating fit results
[Mon Jul 15 12:34:34 2013] Vigneting correction estimate = 1.000000
[Mon Jul 15 12:34:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 15 12:34:34 2013] Assessing source extent using major
[Mon Jul 15 12:34:34 2013] Source does appear to be extended
[Mon Jul 15 12:34:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 15 14:10:24 2013] XMMSAS src. selection expression = ellipse(27633.353180, 27111.193878, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 15 14:10:24 2013] Writing source region out to fullrun_mos2_xmm0693661001_pi300-10000_pass1_cl_src19_src.reg
[Mon Jul 15 14:10:24 2013] Extracting stamp from image fullrun_mos2_xmm0693661001_pi300-10000_cl_sm2.00.img.gz, (281, 275) - (356, 350)
[Mon Jul 15 14:10:24 2013] XMMSAS bgd. selection expression = annulus(27633.353180, 27111.193878, 1087.500000, 2175.000000, X, Y) && !ellipse(26656.998016, 26580.217224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25288.607800, 26801.042000, 373.108011, 373.108011, 0.000000, X, Y) && !ellipse(29058.364800, 25527.165400, 303.630409, 303.630409, 0.000000, X, Y) && !ellipse(27139.002655, 27730.028107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.951935, 25707.076324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.579220, 29028.527600, 304.863209, 304.863209, 0.000000, X, Y) && !ellipse(28333.375549, 26728.683807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28085.077209, 26351.366974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25953.117889, 25458.762054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26217.553497, 24888.759125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.230000, 25470.460000, 1099.920032, 1099.920032, 0.000000, X, Y)
[Mon Jul 15 14:10:24 2013] Writing fullrun_mos2_xmm0693661001_pi300-10000_pass1_cl_src19.gif
[Mon Jul 15 14:11:58 2013] Mean detx,y = (-806.96, -1536.54) 
[Mon Jul 15 14:11:58 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 15 14:12:04 2013] Binned source spectrum to 10 counts/bin
[Mon Jul 15 14:12:04 2013] Setting source spectrum file to fullrun_mos2_xmm0693661001_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul 15 14:12:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693661001_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Jul 15 14:18:48 2013] Not generating rmf since there are only 87 counts
[Mon Jul 15 14:18:48 2013] rmf not generated due to insufficient counts
[Mon Jul 15 14:20:47 2013] Updating aperture counts using extracted products
[Mon Jul 15 14:20:47 2013] Total counts from fullrun_mos2_xmm0693661001_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 324.00
[Mon Jul 15 14:20:47 2013] Total counts from fullrun_mos2_xmm0693661001_pi300-10000_pass1_cl_src19_bgd.pi.gz = 564.00
[Mon Jul 15 14:20:47 2013] Got source and background scale factors 1170432.000000, 5347100.000000
[Mon Jul 15 14:20:47 2013] User source parameters:
  Position = (318.2, 312.2) = 14 20 36.15 39 55 29.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 200.5 +/- 19.0
  Background aperture counts = 123.5
  Rate = 0.008 +/- 0.0007

[Mon Jul 15 14:20:47 2013] Updating counts from extracted products
[Mon Jul 15 14:20:47 2013] Set source signif. to 200.55/11.11 = 18.05
[Mon Jul 15 14:20:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul 15 14:20:50 2013] Using photon index=1.80, rate=0.00768, arf fullrun_mos2_xmm0693661001_pi300-10000_pass1_cl_src19.arf
[Mon Jul 15 14:20:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 15 14:20:50 2013] Updating source flux to 8.3e-14
[Mon Jul 15 14:20:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul 15 14:20:56 2013] xmm0693661001/analysis//spectral/fullrun_mos2_xmm0693661001_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete