[Tue Aug 20 04:10:59 2013] Detection parameters:
  Position = (333.1, 333.9) = 15 7 57.23 57 56 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5852.5 +/- 86.7
  Background counts = 15.9
  Rate = 0.9 +/- 0.01

[Tue Aug 20 04:10:59 2013] Off-axis axis estimate = 3.59'
[Tue Aug 20 04:12:10 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Tue Aug 20 04:12:10 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Tue Aug 20 04:12:10 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.700
[Tue Aug 20 04:12:10 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.23"
[Tue Aug 20 05:01:25 2013] fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 20 05:01:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 20 05:01:25 2013] fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 20 05:01:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 20 05:01:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 20 05:01:26 2013] fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 20 05:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 20 05:01:26 2013] fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 20 05:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 20 05:01:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693660101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 20 06:03:07 2013] Spatial fit model total counts = 7139.460000, observed total counts = 5359.000000
[Tue Aug 20 06:03:07 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 20 06:03:07 2013] Vigneting correction estimate = 1.000000
[Tue Aug 20 06:03:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 20 06:03:07 2013] Assessing source extent using major
[Tue Aug 20 06:03:07 2013] Source does appear to be extended
[Tue Aug 20 06:03:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 20 06:03:20 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Tue Aug 20 06:03:20 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Tue Aug 20 06:03:20 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.700
[Tue Aug 20 06:03:20 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.23"
[Tue Aug 20 06:56:03 2013] fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 20 06:56:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 20 06:56:03 2013] fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 20 06:56:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 20 06:56:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 20 06:56:03 2013] fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 20 06:56:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 20 06:56:03 2013] fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 20 06:56:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 20 06:56:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693660101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 20 07:41:54 2013] Source 1 is offset by -7.459239 and 6.429362 pixels which is larger than
2 X fitted extent = 0.945453 x 0.945453, not incorporating fit results
[Tue Aug 20 07:41:54 2013] Vigneting correction estimate = 1.000000
[Tue Aug 20 07:41:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 20 07:41:54 2013] Assessing source extent using major
[Tue Aug 20 07:41:54 2013] Source does appear to be extended
[Tue Aug 20 07:41:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 20 07:42:06 2013] Counts = 5852.473145, rescaling region sizes by 2.000000
[Tue Aug 20 07:42:06 2013] XMMSAS src. selection expression = ellipse(28931.580200, 28997.820526, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Aug 20 07:42:06 2013] Writing source region out to fullrun_pn_xmm0693660101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 20 07:42:06 2013] Extracting stamp from image fullrun_pn_xmm0693660101_pi300-10000_cl_sm2.00.img.gz, (258, 259) - (408, 409)
[Tue Aug 20 07:42:06 2013] XMMSAS bgd. selection expression = annulus(28931.580200, 28997.820526, 4350.000000, 8700.000000, X, Y) && !ellipse(36242.917572, 36181.615601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24487.446136, 36152.641266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34892.516600, 36222.447320, 378.880811, 378.880811, 0.000000, X, Y) && !ellipse(35837.330000, 35839.560000, 659.360819, 249.920807, 54.349800, X, Y) && !ellipse(21737.369400, 34085.175800, 451.456013, 451.456013, 0.000000, X, Y) && !ellipse(23496.379456, 31216.179810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30892.199860, 30029.902100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38103.347046, 29945.246490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19391.093506, 29240.739777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30933.774963, 28910.969208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26240.652252, 28467.727997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25321.490400, 27174.898200, 1935.704056, 1249.096036, 74.845800, X, Y) && !ellipse(26559.009400, 26229.488800, 1339.664039, 506.275215, 1.280840, X, Y) && !ellipse(26437.010000, 25747.180000, 2150.320062, 2150.320062, 0.000000, X, Y) && !ellipse(25904.082153, 25972.717316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25539.222000, 26376.882000, 1032.464030, 1032.464030, 0.000000, X, Y) && !ellipse(25174.697815, 25809.305573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25483.791016, 25115.557037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.340000, 25286.506000, 1075.160031, 1075.160031, 0.000000, X, Y) && !ellipse(37121.180023, 24204.074860, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 20 07:42:06 2013] Writing fullrun_pn_xmm0693660101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 20 07:42:10 2013] Mean detx,y = (2908.95, -103.11) 
[Tue Aug 20 07:42:12 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 20 07:43:40 2013] Binned source spectrum to 10 counts/bin
[Tue Aug 20 07:43:40 2013] Setting source spectrum file to fullrun_pn_xmm0693660101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 20 07:43:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693660101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 20 07:54:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 20 07:54:01 2013] rmf not generated due to insufficient counts
[Tue Aug 20 10:15:44 2013] Updating aperture counts using extracted products
[Tue Aug 20 10:15:44 2013] Total counts from fullrun_pn_xmm0693660101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 5872.00
[Tue Aug 20 10:15:44 2013] Total counts from fullrun_pn_xmm0693660101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 6984.00
[Tue Aug 20 10:15:44 2013] Got source and background scale factors 4020615.000000, 145610376.000000
[Tue Aug 20 10:15:44 2013] User source parameters:
  Position = (333.1, 333.9) = 15 7 57.23 57 56 44.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5679.2 +/- 77.6
  Background aperture counts = 192.8
  Rate = 0.7 +/- 0.009

[Tue Aug 20 10:15:44 2013] Updating counts from extracted products
[Tue Aug 20 10:15:44 2013] Set source signif. to 5679.16/13.89 = 408.96
[Tue Aug 20 10:15:49 2013] Calculating source flux in energy range 0.30-8.00
[Tue Aug 20 10:15:49 2013] Using photon index=1.80, rate=0.659, arf fullrun_pn_xmm0693660101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 20 10:15:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 20 10:15:49 2013] Updating source flux to 1.9e-12
[Tue Aug 20 10:15:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 20 10:16:02 2013] xmm0693660101/analysis//spectral/fullrun_pn_xmm0693660101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete