[Fri Jun  7 07:19:44 2013] Detection parameters:
  Position = (258.4, 431.9) = 20 48 24.97 29 47 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 445.4 +/- 63.0
  Background counts = 1385.2
  Rate = 0.004 +/- 0.0006

[Fri Jun  7 07:20:00 2013] Off-axis axis estimate = 10.10'
[Fri Jun  7 07:42:39 2013] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 07:42:39 2013] Initial guess for spatial extent in simple fitting = 11.48"
[Fri Jun  7 07:42:39 2013] source mask rpix=2.6, npix_max = 39, mask sum = 28, frac = 0.710
[Fri Jun  7 07:42:39 2013] Giving source the simple spatial ID 82 for pass 0, mean size = 11.48"
[Sat Jun  8 06:29:09 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src82.ximg exists
[Sat Jun  8 06:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src82.csv
[Sat Jun  8 06:29:09 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src82_1.ximg exists
[Sat Jun  8 06:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src82.csv
[Sat Jun  8 06:29:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 06:29:12 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Sat Jun  8 06:29:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Sat Jun  8 06:29:12 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Sat Jun  8 06:29:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Sat Jun  8 06:29:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:36 2013] Warning, spatial fit 82 centroid is now closest to src. 112
[Sat Jun  8 18:05:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:37 2013] Assessing source extent using major
[Sat Jun  8 18:05:37 2013] Source does appear to be extended
[Sat Jun  8 18:05:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:05:37 2013] Source is confused with source 13
[Sat Jun  8 18:07:09 2013] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 18:07:09 2013] Initial guess for spatial extent in simple fitting = 11.48"
[Sat Jun  8 18:07:09 2013] source mask rpix=2.6, npix_max = 39, mask sum = 28, frac = 0.710
[Sat Jun  8 18:07:09 2013] Giving source the simple spatial ID 80 for pass 1, mean size = 11.48"
[Sun Jun  9 16:44:54 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src80.ximg exists
[Sun Jun  9 16:44:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src80.csv
[Sun Jun  9 16:44:54 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src80_1.ximg exists
[Sun Jun  9 16:44:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src80.csv
[Sun Jun  9 16:44:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:44:57 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Sun Jun  9 16:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sun Jun  9 16:44:57 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Sun Jun  9 16:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sun Jun  9 16:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:58 2013] Warning, spatial fit 80 centroid is now closest to src. 112
[Mon Jun 10 10:41:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:41:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:41:59 2013] Assessing source extent using major
[Mon Jun 10 10:41:59 2013] Source does appear to be extended
[Mon Jun 10 10:41:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:43:58 2013] XMMSAS src. selection expression = ellipse(22434.946533, 37526.013580, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:43:58 2013] Writing source region out to fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src96_src.reg
[Mon Jun 10 10:43:58 2013] Extracting stamp from image fullrun_pn_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (221, 394) - (296, 469)
[Mon Jun 10 10:43:58 2013] XMMSAS bgd. selection expression = annulus(22434.946533, 37526.013580, 1087.500000, 2175.000000, X, Y) && !ellipse(21049.939880, 36010.929077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22439.754791, 36950.769623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.160000, 31818.850000, 9057.888261, 5376.624155, 334.091100, X, Y) && !ellipse(30928.578000, 29926.962000, 8204.784236, 8204.784236, 0.000000, X, Y) && !ellipse(19137.332200, 27822.146800, 9088.608262, 6903.936199, 7.386500, X, Y) && !ellipse(21047.280869, 37107.002167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22707.076416, 35098.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25478.130000, 38444.142000, 1814.768052, 1814.768052, 0.000000, X, Y) && !ellipse(26448.905400, 37348.987760, 2535.920073, 1347.328039, 18.739300, X, Y) && !ellipse(22179.994690, 35372.123718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20682.447983, 39228.606873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22179.150000, 39112.898400, 1926.272055, 1335.064038, 338.793100, X, Y) && !ellipse(23376.143799, 38887.016113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21519.175156, 39012.633514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20167.635147, 39011.595398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22286.546326, 38585.911896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20645.150000, 37963.382600, 1909.552055, 1244.992036, 103.347600, X, Y) && !ellipse(21447.800003, 38149.390564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22263.009491, 38068.587402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19496.231339, 38929.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23381.475098, 38321.837372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.020966, 37631.266907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23598.712250, 37628.805695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25329.671875, 37454.614532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24106.398987, 37533.843262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21381.388428, 37361.515930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23910.496000, 37192.912000, 1104.848032, 1104.848032, 0.000000, X, Y) && !ellipse(23567.670000, 36509.782000, 1774.328051, 1774.328051, 0.000000, X, Y) && !ellipse(24306.678467, 36830.533966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.333588, 35965.180267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.688385, 36228.123749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23222.669830, 36146.917023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21613.540207, 35792.935242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.374924, 36234.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23306.852844, 35608.689484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.662109, 35530.658173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24276.708496, 35480.390503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23434.474792, 35196.488220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21456.297424, 35190.761322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23178.062683, 34665.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22088.856827, 34771.553436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19722.338000, 39230.054000, 1995.968057, 1785.840051, 359.991000, X, Y)
[Mon Jun 10 10:43:58 2013] Writing fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src96.gif