[Fri Jun  7 07:19:39 2013] Detection parameters:
  Position = (242.5, 427.1) = 20 48 30.30 29 47 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 763.5 +/- 101.6
  Background counts = 1428.5
  Rate = 0.007 +/- 0.001

[Fri Jun  7 07:20:00 2013] Off-axis axis estimate = 10.17'
[Fri Jun  7 07:42:39 2013] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 07:42:39 2013] Initial guess for spatial extent in simple fitting = 11.51"
[Fri Jun  7 07:42:39 2013] source mask rpix=2.6, npix_max = 39, mask sum = 28, frac = 0.707
[Fri Jun  7 07:42:39 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 11.51"
[Sat Jun  8 06:29:08 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src22.ximg exists
[Sat Jun  8 06:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src22.csv
[Sat Jun  8 06:29:08 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat Jun  8 06:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src22.csv
[Sat Jun  8 06:29:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 06:29:10 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat Jun  8 06:29:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat Jun  8 06:29:10 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Jun  8 06:29:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat Jun  8 06:29:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:36 2013] Warning, spatial fit 22 centroid is now closest to src. 134
[Sat Jun  8 18:05:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:37 2013] Assessing source extent using major
[Sat Jun  8 18:05:37 2013] Source does appear to be extended
[Sat Jun  8 18:05:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:05:37 2013] Source is confused with source 82
[Sat Jun  8 18:05:37 2013] Source is confused with source 106
[Sat Jun  8 18:07:09 2013] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 18:07:09 2013] Initial guess for spatial extent in simple fitting = 11.51"
[Sat Jun  8 18:07:09 2013] source mask rpix=2.6, npix_max = 39, mask sum = 28, frac = 0.707
[Sat Jun  8 18:07:09 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 11.51"
[Sun Jun  9 16:44:52 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src22.ximg exists
[Sun Jun  9 16:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src22.csv
[Sun Jun  9 16:44:52 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Jun  9 16:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src22.csv
[Sun Jun  9 16:44:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:44:55 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Jun  9 16:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Jun  9 16:44:55 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Jun  9 16:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Jun  9 16:44:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:58 2013] Warning, spatial fit 22 centroid is now closest to src. 113
[Mon Jun 10 10:41:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:41:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:41:59 2013] Assessing source extent using major
[Mon Jun 10 10:41:59 2013] Source does appear to be extended
[Mon Jun 10 10:41:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:43:47 2013] XMMSAS src. selection expression = ellipse(21047.280869, 37107.002167, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:43:47 2013] Writing source region out to fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src31_src.reg
[Mon Jun 10 10:43:47 2013] Extracting stamp from image fullrun_pn_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (205, 390) - (280, 465)
[Mon Jun 10 10:43:48 2013] XMMSAS bgd. selection expression = annulus(21047.280869, 37107.002167, 1087.500000, 2175.000000, X, Y) && !ellipse(21049.939880, 36010.929077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22439.754791, 36950.769623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.160000, 31818.850000, 9057.888261, 5376.624155, 334.091100, X, Y) && !ellipse(30928.578000, 29926.962000, 8204.784236, 8204.784236, 0.000000, X, Y) && !ellipse(19137.332200, 27822.146800, 9088.608262, 6903.936199, 7.386500, X, Y) && !ellipse(22707.076416, 35098.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22179.994690, 35372.123718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20682.447983, 39228.606873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22179.150000, 39112.898400, 1926.272055, 1335.064038, 338.793100, X, Y) && !ellipse(18910.958008, 38669.508148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23376.143799, 38887.016113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21519.175156, 39012.633514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20167.635147, 39011.595398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22286.546326, 38585.911896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18066.034760, 38399.385468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20645.150000, 37963.382600, 1909.552055, 1244.992036, 103.347600, X, Y) && !ellipse(21447.800003, 38149.390564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22263.009491, 38068.587402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19496.231339, 38929.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23381.475098, 38321.837372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23598.712250, 37628.805695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22434.946533, 37526.013580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19172.746552, 37643.575623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18088.273285, 37377.464691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18939.361511, 38240.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21381.388428, 37361.515930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23910.496000, 37192.912000, 1104.848032, 1104.848032, 0.000000, X, Y) && !ellipse(23567.670000, 36509.782000, 1774.328051, 1774.328051, 0.000000, X, Y) && !ellipse(24006.333588, 35965.180267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18268.414368, 36392.501923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23222.669830, 36146.917023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21613.540207, 35792.935242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.374924, 36234.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23306.852844, 35608.689484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.662109, 35530.658173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23434.474792, 35196.488220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21456.297424, 35190.761322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23178.062683, 34665.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22088.856827, 34771.553436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23303.345551, 34235.864105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.718765, 34154.041412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19722.338000, 39230.054000, 1995.968057, 1785.840051, 359.991000, X, Y)
[Mon Jun 10 10:43:48 2013] Writing fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src31.gif