[Fri Jun  7 07:19:38 2013] Detection parameters:
  Position = (374.0, 341.0) = 20 47 46.38 29 41 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2113.2 +/- 78.4
  Background counts = 1360.2
  Rate = 0.02 +/- 0.0007

[Fri Jun  7 07:20:00 2013] Off-axis axis estimate = 6.29'
[Fri Jun  7 07:42:39 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 07:42:39 2013] Initial guess for spatial extent in simple fitting = 9.57"
[Fri Jun  7 07:42:39 2013] source mask rpix=2.2, npix_max = 29, mask sum = 34, frac = 1.166
[Fri Jun  7 07:42:39 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.57"
[Sat Jun  8 06:29:07 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src15.ximg exists
[Sat Jun  8 06:29:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src15.csv
[Sat Jun  8 06:29:07 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Jun  8 06:29:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src15.csv
[Sat Jun  8 06:29:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 06:29:10 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Jun  8 06:29:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Jun  8 06:29:10 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Jun  8 06:29:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Jun  8 06:29:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:36 2013] Warning, spatial fit 15 centroid is now closest to src. 42
[Sat Jun  8 18:05:36 2013] Spatial fit model total counts = 26969.300000, observed total counts = 25285.000000
[Sat Jun  8 18:05:36 2013] Offset between fit and detection position for source 22 = 1.880562 pixels
[Sat Jun  8 18:05:36 2013] Warning, changing simple spatial fit ID from 15 to 54
[Sat Jun  8 18:05:36 2013] 25836.304000 total counts/ 25520.400000 bgd. counts: snr = 1.977477
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.880562 pixels
  Position = (375.5, 342.1) = 20 47 45.88 29 41 13.3
  Extent = 17.2 (13.2-19.1)" x 3.4 (2.4-8.5)", rotation angle = 111 (90-136) degrees
  Source counts = 315.9 +/- 160.7
  Background counts = 25520.4
  Rate = 0.004 +/- 0.002
[Sat Jun  8 18:05:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:37 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:05:37 2013] Source does appear to be extended
[Sat Jun  8 18:05:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.56
[Sat Jun  8 18:05:37 2013] Source is asymmetric
[Sat Jun  8 18:05:37 2013] Source is confused with source 14
[Sat Jun  8 18:07:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 18:07:09 2013] Initial guess for spatial extent in simple fitting = 10.27"
[Sat Jun  8 18:07:09 2013] source mask rpix=2.4, npix_max = 32, mask sum = 23, frac = 0.702
[Sat Jun  8 18:07:09 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.27"
[Sun Jun  9 16:44:52 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jun  9 16:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src15.csv
[Sun Jun  9 16:44:52 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jun  9 16:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src15.csv
[Sun Jun  9 16:44:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:44:55 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jun  9 16:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Jun  9 16:44:55 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jun  9 16:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Jun  9 16:44:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:57 2013] Warning, spatial fit 15 centroid is now closest to src. 14
[Mon Jun 10 10:41:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:41:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:41:59 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:41:59 2013] Source does appear to be extended
[Mon Jun 10 10:41:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.56
[Mon Jun 10 10:41:59 2013] Source is asymmetric
[Mon Jun 10 10:43:46 2013] XMMSAS src. selection expression = ellipse(32617.952000, 29714.242000, 1029.150030, 203.834406, 111.292600, X, Y)
[Mon Jun 10 10:43:46 2013] Writing source region out to fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src22_src.reg
[Mon Jun 10 10:43:46 2013] Extracting stamp from image fullrun_pn_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (316, 283) - (435, 401)
[Mon Jun 10 10:43:46 2013] XMMSAS bgd. selection expression = annulus(32617.952000, 29714.242000, 1715.250049, 3430.500099, X, Y) && !ellipse(33142.000000, 32128.352295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28965.413239, 29364.541138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26676.867800, 28331.080000, 3515.832101, 3515.832101, 0.000000, X, Y) && !ellipse(33310.535950, 29533.655884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.160000, 31818.850000, 9057.888261, 5376.624155, 334.091100, X, Y) && !ellipse(32401.153900, 30486.468903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.578000, 29926.962000, 8204.784236, 8204.784236, 0.000000, X, Y) && !ellipse(32401.706146, 28925.914368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32196.211200, 32711.112600, 1636.744047, 1240.248036, 138.930900, X, Y) && !ellipse(31698.846000, 31605.636000, 1564.968045, 1564.968045, 0.000000, X, Y) && !ellipse(32144.717896, 31007.990997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33390.786865, 30742.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31613.472000, 31112.924000, 1509.648043, 1509.648043, 0.000000, X, Y) && !ellipse(28825.344513, 28915.963318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31041.871200, 29279.654000, 2860.000082, 1352.000039, 32.397200, X, Y) && !ellipse(32284.332611, 26169.837311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32810.266000, 34044.550000, 1683.656048, 1683.656048, 0.000000, X, Y) && !ellipse(34976.940800, 32537.586000, 801.568023, 801.568023, 0.000000, X, Y) && !ellipse(35487.747589, 31965.248535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30660.048000, 31733.188000, 2934.224084, 1079.704031, 318.950900, X, Y) && !ellipse(32223.888214, 29964.378632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30159.068000, 29404.954000, 1367.464039, 1367.464039, 0.000000, X, Y) && !ellipse(31635.292114, 28148.399658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36272.980469, 33809.405334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34354.989960, 33645.961731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31586.057251, 33346.254059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34423.303864, 33180.535095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32821.276000, 31244.291000, 4694.904135, 4694.904135, 0.000000, X, Y) && !ellipse(34071.138123, 31531.780487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35182.865265, 31284.711426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35244.586731, 30682.025085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28527.394470, 28399.557465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28423.704956, 27970.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32979.905151, 28306.126984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29704.331787, 28488.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32090.528748, 27711.660614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31015.584381, 27537.618134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29028.379913, 27436.012817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29642.166931, 26920.010529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31440.022675, 27110.654907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30834.014893, 28051.058319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28943.886261, 26833.538879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31573.018402, 26094.498199, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:43:46 2013] Writing fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src22.gif