[Fri Jun  7 07:19:38 2013] Detection parameters:
  Position = (393.2, 425.1) = 20 47 39.92 29 47 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1538.3 +/- 74.0
  Background counts = 1264.2
  Rate = 0.01 +/- 0.0007

[Fri Jun  7 07:20:00 2013] Off-axis axis estimate = 11.47'
[Fri Jun  7 07:42:39 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 07:42:39 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Fri Jun  7 07:42:39 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.966
[Fri Jun  7 07:42:39 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 12.16"
[Sat Jun  8 06:29:07 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun  8 06:29:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src11.csv
[Sat Jun  8 06:29:07 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun  8 06:29:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src11.csv
[Sat Jun  8 06:29:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 06:29:10 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun  8 06:29:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun  8 06:29:10 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun  8 06:29:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun  8 06:29:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:36 2013] Source 18 is offset by 2.066393 and -3.652549 pixels which is larger than
2 X fitted extent = 1.614253 x 5.928828, not incorporating fit results
[Sat Jun  8 18:05:36 2013] Warning, spatial fit 11 centroid is now closest to src. 15
[Sat Jun  8 18:05:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:37 2013] Assessing source extent using major
[Sat Jun  8 18:05:37 2013] Source does appear to be extended
[Sat Jun  8 18:05:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:07:09 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 18:07:09 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Sat Jun  8 18:07:09 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.966
[Sat Jun  8 18:07:09 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 12.16"
[Sun Jun  9 16:44:52 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun  9 16:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src11.csv
[Sun Jun  9 16:44:52 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun  9 16:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src11.csv
[Sun Jun  9 16:44:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:44:55 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun  9 16:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun  9 16:44:55 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun  9 16:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun  9 16:44:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:57 2013] Source 18 is offset by 2.055611 and -3.384687 pixels which is larger than
2 X fitted extent = 1.727159 x 6.958345, not incorporating fit results
[Mon Jun 10 10:41:57 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.017023 pixels away
[Mon Jun 10 10:41:58 2013] Source 18 is offset by -5.985860 and 2.883589 pixels which is larger than
2 X fitted extent = 1.474612 x 2.202795, not incorporating fit results
[Mon Jun 10 10:41:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:41:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:41:59 2013] Assessing source extent using major
[Mon Jun 10 10:41:59 2013] Source does appear to be extended
[Mon Jun 10 10:41:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:43:45 2013] Counts = 1538.341919, rescaling region sizes by 2.000000
[Mon Jun 10 10:43:45 2013] XMMSAS src. selection expression = ellipse(34163.910156, 36936.026245, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 10:43:45 2013] Writing source region out to fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src18_src.reg
[Mon Jun 10 10:43:45 2013] Extracting stamp from image fullrun_pn_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (318, 350) - (468, 500)
[Mon Jun 10 10:43:45 2013] XMMSAS bgd. selection expression = annulus(34163.910156, 36936.026245, 4350.000000, 8700.000000, X, Y) && !ellipse(24396.878000, 26656.250000, 3467.736100, 3467.736100, 32.398000, X, Y) && !ellipse(28004.815674, 34521.346130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33142.000000, 32128.352295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28965.413239, 29364.541138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26676.867800, 28331.080000, 3515.832101, 3515.832101, 0.000000, X, Y) && !ellipse(33310.535950, 29533.655884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33402.949554, 37802.826935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31618.568085, 38102.322205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30512.262512, 38190.073578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.160000, 31818.850000, 9057.888261, 5376.624155, 334.091100, X, Y) && !ellipse(32401.153900, 30486.468903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.578000, 29926.962000, 8204.784236, 8204.784236, 0.000000, X, Y) && !ellipse(32617.952000, 29714.242000, 1372.200039, 271.779208, 111.292600, X, Y) && !ellipse(32401.706146, 28925.914368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19137.332200, 27822.146800, 9088.608262, 6903.936199, 7.386500, X, Y) && !ellipse(34244.851379, 37833.152679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32425.227051, 37887.596710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37362.860000, 37096.248000, 2083.896060, 2083.896060, 0.000000, X, Y) && !ellipse(32196.211200, 32711.112600, 1636.744047, 1240.248036, 138.930900, X, Y) && !ellipse(31698.846000, 31605.636000, 1564.968045, 1564.968045, 0.000000, X, Y) && !ellipse(32144.717896, 31007.990997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33390.786865, 30742.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31613.472000, 31112.924000, 1509.648043, 1509.648043, 0.000000, X, Y) && !ellipse(28825.344513, 28915.963318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31041.871200, 29279.654000, 2860.000082, 1352.000039, 32.397200, X, Y) && !ellipse(27510.993500, 38533.366211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.281860, 38275.892090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.581696, 38643.074677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25478.130000, 38444.142000, 1814.768052, 1814.768052, 0.000000, X, Y) && !ellipse(31080.093628, 38120.057800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.646545, 38058.777069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36767.235413, 37358.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30224.608673, 37448.287598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33288.268219, 36947.068512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31696.931274, 37548.161835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26448.905400, 37348.987760, 2535.920073, 1347.328039, 18.739300, X, Y) && !ellipse(37765.133484, 36411.700439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.513947, 34925.903564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38358.028076, 35887.972015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28483.212128, 35184.036133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32810.266000, 34044.550000, 1683.656048, 1683.656048, 0.000000, X, Y) && !ellipse(34976.940800, 32537.586000, 801.568023, 801.568023, 0.000000, X, Y) && !ellipse(35487.747589, 31965.248535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30660.048000, 31733.188000, 2934.224084, 1079.704031, 318.950900, X, Y) && !ellipse(32223.888214, 29964.378632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30159.068000, 29404.954000, 1367.464039, 1367.464039, 0.000000, X, Y) && !ellipse(31635.292114, 28148.399658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29024.782349, 38361.089325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27873.866000, 38420.286000, 1845.848053, 1148.200033, 0.000000, X, Y) && !ellipse(27543.294586, 38066.142120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35725.497498, 37659.006653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25819.211487, 37451.970123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25329.671875, 37454.614532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36159.708954, 37579.140717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27769.752655, 36931.852539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29531.271667, 37459.372345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36242.694550, 36943.181549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27351.253662, 37102.268250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38529.580139, 36301.402557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32780.831055, 36762.554596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29424.149200, 36509.607300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25499.415863, 36668.975433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.795624, 36411.254395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33312.463501, 36244.561035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30080.530853, 36583.833954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.051819, 35894.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30992.113922, 35803.236755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26310.739716, 36049.525238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32804.574982, 35447.377869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26656.063446, 35202.613373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32183.178650, 35112.554779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36403.976959, 34476.170807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37444.634277, 33975.259705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36968.189270, 33979.202423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36272.980469, 33809.405334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34354.989960, 33645.961731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31586.057251, 33346.254059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34423.303864, 33180.535095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26436.975739, 33321.939301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32821.276000, 31244.291000, 4694.904135, 4694.904135, 0.000000, X, Y) && !ellipse(34071.138123, 31531.780487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35182.865265, 31284.711426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35244.586731, 30682.025085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27789.880432, 28750.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28527.394470, 28399.557465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28423.704956, 27970.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32979.905151, 28306.126984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29704.331787, 28488.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32090.528748, 27711.660614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31015.584381, 27537.618134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28159.986206, 27614.927277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29028.379913, 27436.012817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30834.014893, 28051.058319, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:43:45 2013] Writing fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src18.gif