[Fri Jun  7 07:19:37 2013] Detection parameters:
  Position = (291.0, 314.0) = 20 48 14.08 29 39 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9583.9 +/- 156.1
  Background counts = 3198.5
  Rate = 0.1 +/- 0.002

[Fri Jun  7 07:20:00 2013] Off-axis axis estimate = 1.25'
[Fri Jun  7 07:42:39 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 07:42:39 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Fri Jun  7 07:42:39 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.889
[Fri Jun  7 07:42:39 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.05"
[Sat Jun  8 06:29:07 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun  8 06:29:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src4.csv
[Sat Jun  8 06:29:07 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun  8 06:29:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src4.csv
[Sat Jun  8 06:29:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 06:29:10 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun  8 06:29:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun  8 06:29:10 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun  8 06:29:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun  8 06:29:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:36 2013] Spatial fit model total counts = 70260.200000, observed total counts = 81625.000000
[Sat Jun  8 18:05:36 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 18:05:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:37 2013] Assessing source extent using major
[Sat Jun  8 18:05:37 2013] Source does appear to be extended
[Sat Jun  8 18:05:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:07:09 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 18:07:09 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Sat Jun  8 18:07:09 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.889
[Sat Jun  8 18:07:09 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.05"
[Sun Jun  9 16:44:52 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun  9 16:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src4.csv
[Sun Jun  9 16:44:52 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun  9 16:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src4.csv
[Sun Jun  9 16:44:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:44:55 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun  9 16:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun  9 16:44:55 2013] fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun  9 16:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun  9 16:44:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:57 2013] Spatial fit model total counts = 71201.700000, observed total counts = 81625.000000
[Mon Jun 10 10:41:57 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:41:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:41:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:41:59 2013] Assessing source extent using major
[Mon Jun 10 10:41:59 2013] Source does appear to be extended
[Mon Jun 10 10:41:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:43:43 2013] Counts = 9583.858398, rescaling region sizes by 2.000000
[Mon Jun 10 10:43:43 2013] XMMSAS src. selection expression = ellipse(25268.064575, 27269.752228, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 10:43:43 2013] Writing source region out to fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src10_src.reg
[Mon Jun 10 10:43:43 2013] Extracting stamp from image fullrun_pn_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (216, 239) - (366, 389)
[Mon Jun 10 10:43:43 2013] XMMSAS bgd. selection expression = annulus(25268.064575, 27269.752228, 4350.000000, 8700.000000, X, Y) && !ellipse(24341.448000, 24441.409000, 3517.608101, 3517.608101, 0.000000, X, Y) && !ellipse(20219.928604, 29603.907959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24396.878000, 26656.250000, 3467.736100, 3467.736100, 32.398000, X, Y) && !ellipse(22180.025223, 33371.901642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28004.815674, 34521.346130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33142.000000, 32128.352295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28965.413239, 29364.541138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26676.867800, 28331.080000, 3515.832101, 3515.832101, 0.000000, X, Y) && !ellipse(17366.445160, 27934.521118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16002.994690, 23801.721100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21049.939880, 36010.929077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33310.535950, 29533.655884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.160000, 31818.850000, 9057.888261, 5376.624155, 334.091100, X, Y) && !ellipse(32401.153900, 30486.468903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.578000, 29926.962000, 8204.784236, 8204.784236, 0.000000, X, Y) && !ellipse(32617.952000, 29714.242000, 1372.200039, 271.779208, 111.292600, X, Y) && !ellipse(32401.706146, 28925.914368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19137.332200, 27822.146800, 9088.608262, 6903.936199, 7.386500, X, Y) && !ellipse(21007.161000, 27329.736000, 4148.544119, 4148.544119, 0.000000, X, Y) && !ellipse(22008.328461, 26130.017181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22707.076416, 35098.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32196.211200, 32711.112600, 1636.744047, 1240.248036, 138.930900, X, Y) && !ellipse(31698.846000, 31605.636000, 1564.968045, 1564.968045, 0.000000, X, Y) && !ellipse(32144.717896, 31007.990997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33390.786865, 30742.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31613.472000, 31112.924000, 1509.648043, 1509.648043, 0.000000, X, Y) && !ellipse(20534.233627, 30253.556458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28825.344513, 28915.963318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31041.871200, 29279.654000, 2860.000082, 1352.000039, 32.397200, X, Y) && !ellipse(19672.652000, 28063.806760, 4444.176128, 4444.176128, 0.000000, X, Y) && !ellipse(32284.332611, 26169.837311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26448.905400, 37348.987760, 2535.920073, 1347.328039, 18.739300, X, Y) && !ellipse(22179.994690, 35372.123718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.513947, 34925.903564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28483.212128, 35184.036133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32810.266000, 34044.550000, 1683.656048, 1683.656048, 0.000000, X, Y) && !ellipse(30660.048000, 31733.188000, 2934.224084, 1079.704031, 318.950900, X, Y) && !ellipse(32223.888214, 29964.378632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16435.652954, 29609.860535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30159.068000, 29404.954000, 1367.464039, 1367.464039, 0.000000, X, Y) && !ellipse(17220.588470, 28934.421082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31635.292114, 28148.399658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18003.897781, 27873.532440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23567.670000, 36509.782000, 1774.328051, 1774.328051, 0.000000, X, Y) && !ellipse(15595.066000, 36478.774000, 1995.968057, 1995.968057, 0.000000, X, Y) && !ellipse(24306.678467, 36830.533966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32780.831055, 36762.554596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29424.149200, 36509.607300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25499.415863, 36668.975433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.795624, 36411.254395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.333588, 35965.180267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18268.414368, 36392.501923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33312.463501, 36244.561035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17674.979477, 36573.551025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30080.530853, 36583.833954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.051819, 35894.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.688385, 36228.123749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23222.669830, 36146.917023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21613.540207, 35792.935242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16523.243698, 36325.125244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.374924, 36234.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23306.852844, 35608.689484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30992.113922, 35803.236755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.662109, 35530.658173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24276.708496, 35480.390503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26310.739716, 36049.525238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32804.574982, 35447.377869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23434.474792, 35196.488220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26656.063446, 35202.613373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32183.178650, 35112.554779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21456.297424, 35190.761322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23178.062683, 34665.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22088.856827, 34771.553436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23303.345551, 34235.864105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.718765, 34154.041412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34354.989960, 33645.961731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31586.057251, 33346.254059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22926.400421, 33538.212677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34423.303864, 33180.535095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26436.975739, 33321.939301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23207.010468, 33024.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22715.920319, 32477.178009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32821.276000, 31244.291000, 4694.904135, 4694.904135, 0.000000, X, Y) && !ellipse(34071.138123, 31531.780487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18601.055023, 30998.674500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16318.941849, 31094.194489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19277.215317, 30832.488251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19780.862427, 30563.345276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17168.455643, 30405.278107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16280.737305, 30491.330261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23695.734985, 30032.108429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18175.406036, 30226.111420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15948.983429, 30050.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15713.377457, 30731.796265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23244.990662, 29944.349091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18655.318512, 29979.512299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17123.989212, 29880.554047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19742.113602, 29627.452759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19200.524796, 30135.293488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18026.100464, 29346.492249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22961.425568, 29183.661957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20913.289505, 28818.534363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18877.755539, 29099.585144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19561.531784, 29176.796051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17861.650604, 28733.106140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27789.880432, 28750.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28527.394470, 28399.557465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28423.704956, 27970.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32979.905151, 28306.126984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29704.331787, 28488.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32090.528748, 27711.660614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31015.584381, 27537.618134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28159.986206, 27614.927277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29028.379913, 27436.012817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29642.166931, 26920.010529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31440.022675, 27110.654907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30834.014893, 28051.058319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28943.886261, 26833.538879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19176.244553, 26738.353424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31573.018402, 26094.498199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27635.458618, 26485.047699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18737.739914, 26574.126587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21046.767120, 25969.340118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27528.896362, 25629.591949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20416.233505, 25195.199951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19738.927567, 25627.847595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18605.157043, 25028.533142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.215179, 24231.588928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20281.927521, 24485.128296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28264.188141, 23507.270386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17543.133377, 23004.001617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20791.241791, 23108.559326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23525.287415, 23186.784454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17503.589371, 22556.915924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24572.003510, 23112.050690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22919.523895, 23230.926971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22201.126068, 22526.101654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19692.070282, 22384.254059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18914.072357, 21937.510864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16643.520508, 21963.254028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16195.002426, 21964.841736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19604.056061, 21344.321564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17259.225784, 21605.064026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18418.158020, 21256.677719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34319.837372, 21426.865097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16712.042831, 21269.100601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17783.462646, 21084.903961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19282.482895, 20918.734970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18827.880814, 20834.723206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16909.326111, 20820.983429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16149.225739, 20823.501724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18824.907181, 20303.701416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17808.739853, 20402.853485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16778.722565, 20056.766434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18156.591171, 19973.648087, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:43:43 2013] Writing fullrun_pn_xmm0693400101_pi300-10000_pass1_cl_src10.gif