[Fri Jun  7 07:23:01 2013] Detection parameters:
  Position = (371.2, 333.1) = 20 47 47.30 29 40 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 378.9 +/- 36.1
  Background counts = 371.2
  Rate = 0.006 +/- 0.0005

[Fri Jun  7 07:23:12 2013] Off-axis axis estimate = 5.84'
[Sat Jun  8 11:42:54 2013] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:42:54 2013] Initial guess for spatial extent in simple fitting = 9.35"
[Sat Jun  8 11:42:54 2013] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.068
[Sat Jun  8 11:42:54 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 9.35"
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src41.ximg exists
[Sat Jun  8 18:05:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src41.csv
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Jun  8 18:05:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src41.csv
[Sat Jun  8 18:05:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Jun  8 18:05:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Jun  8 18:05:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sat Jun  8 18:05:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:06:16 2013] Warning, spatial fit 41 centroid is now closest to src. 123
[Sat Jun  8 18:06:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:06:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:06:17 2013] Assessing source extent using major
[Sat Jun  8 18:06:17 2013] Source does appear to be extended
[Sat Jun  8 18:06:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:06:17 2013] Source is confused with source 24
[Mon Jun 10 02:24:18 2013] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:24:18 2013] Initial guess for spatial extent in simple fitting = 9.35"
[Mon Jun 10 02:24:18 2013] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.068
[Mon Jun 10 02:24:18 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 9.35"
[Mon Jun 10 10:41:21 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src39.ximg exists
[Mon Jun 10 10:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src39.csv
[Mon Jun 10 10:41:21 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src39_1.ximg exists
[Mon Jun 10 10:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src39.csv
[Mon Jun 10 10:41:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:25 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Mon Jun 10 10:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon Jun 10 10:41:25 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Mon Jun 10 10:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon Jun 10 10:41:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:55 2013] Warning, spatial fit 39 centroid is now closest to src. 183
[Mon Jun 10 10:42:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:55 2013] Assessing source extent using major
[Mon Jun 10 10:42:55 2013] Source does appear to be extended
[Mon Jun 10 10:42:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 15:45:59 2013] XMMSAS src. selection expression = ellipse(32248.035706, 28930.082764, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 15:45:59 2013] Writing source region out to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src60_src.reg
[Mon Jun 10 15:45:59 2013] Extracting stamp from image fullrun_mos2_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (334, 296) - (409, 371)
[Mon Jun 10 15:45:59 2013] XMMSAS bgd. selection expression = annulus(32248.035706, 28930.082764, 1087.500000, 2175.000000, X, Y) && !ellipse(30762.517609, 30075.358856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31175.425200, 31650.097400, 1543.504044, 683.049620, 357.101830, X, Y) && !ellipse(31148.234000, 31441.888000, 1592.488046, 1592.488046, 0.000000, X, Y) && !ellipse(30870.512600, 29405.634600, 741.169621, 741.169621, 0.000000, X, Y) && !ellipse(30244.385986, 31187.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32571.378600, 29052.610000, 1535.936044, 1535.936044, 0.000000, X, Y) && !ellipse(30991.370000, 29318.668000, 1235.168036, 1235.168036, 0.000000, X, Y) && !ellipse(31697.364000, 32166.442000, 1563.504045, 242.510407, 3.049510, X, Y) && !ellipse(32999.286865, 29932.743958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33294.263275, 29357.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30311.632568, 29535.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32140.217621, 31004.064209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32597.472076, 30871.843750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31256.323853, 30946.792572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33224.454590, 30787.458954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32414.180400, 31581.293800, 1608.904046, 469.302414, 9.805870, X, Y) && !ellipse(32917.830566, 31264.992523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31306.315399, 27797.035736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30492.503784, 28935.836212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.581177, 29790.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.952087, 28052.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32243.561981, 28238.184784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33813.555145, 30699.994324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.802734, 29873.783722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35065.114716, 31878.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30254.305176, 27019.499786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.287750, 27536.771179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34305.303741, 30052.780487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.964000, 32930.472000, 2709.048078, 2142.880062, 346.474000, X, Y) && !ellipse(31396.666046, 27009.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33890.673126, 31700.573975, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 15:45:59 2013] Writing fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src60.gif
[Mon Jun 10 16:38:05 2013] Mean detx,y = (7231.24, -5358.17) 
[Mon Jun 10 16:38:07 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 16:38:17 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 16:38:17 2013] Setting source spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Jun 10 16:38:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src60_bgd.pi.gz