[Fri Jun  7 07:22:57 2013] Detection parameters:
  Position = (292.0, 313.0) = 20 48 13.75 29 39 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1651.6 +/- 74.5
  Background counts = 1313.6
  Rate = 0.02 +/- 0.0007

[Fri Jun  7 07:23:12 2013] Off-axis axis estimate = 1.15'
[Sat Jun  8 11:42:54 2013] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:42:54 2013] Initial guess for spatial extent in simple fitting = 7.01"
[Sat Jun  8 11:42:54 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Sat Jun  8 11:42:54 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.01"
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun  8 18:05:04 2013] Fit fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src6 appears to have run properly
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun  8 18:05:06 2013] Fit fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jun  8 18:06:16 2013] Spatial fit model total counts = 21676.100000, observed total counts = 21649.000000
[Sat Jun  8 18:06:16 2013] Offset between fit and detection position for source 6 = 3.510215 pixels
[Sat Jun  8 18:06:16 2013] 21405.940000 total counts/ 19835.000000 bgd. counts: snr = 11.154330
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 3.510215 pixels
  Position = (292.0, 316.5) = 20 48 13.73 29 39 22.1
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 1570.9 +/- 146.3
  Background counts = 19835.0
  Rate = 0.02 +/- 0.001
[Sat Jun  8 18:06:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:06:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:06:17 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:06:17 2013] Source does appear to be extended
[Sat Jun  8 18:06:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:06:17 2013] Source is confused with source 84
[Mon Jun 10 02:24:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:24:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 02:24:18 2013] Initial guess for spatial extent in simple fitting = 14.01"
[Mon Jun 10 02:24:18 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.011
[Mon Jun 10 02:24:18 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 14.01"
[Mon Jun 10 10:41:20 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jun 10 10:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src6.csv
[Mon Jun 10 10:41:20 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jun 10 10:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src6.csv
[Mon Jun 10 10:41:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:24 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jun 10 10:41:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 10 10:41:24 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jun 10 10:41:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 10 10:41:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:54 2013] Warning, spatial fit 6 centroid is now closest to src. 174
[Mon Jun 10 10:42:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:55 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:42:55 2013] Source does appear to be extended
[Mon Jun 10 10:42:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 15:45:56 2013] Counts = 1570.940000, rescaling region sizes by 2.000000
[Mon Jun 10 15:45:56 2013] XMMSAS src. selection expression = ellipse(25359.120140, 27488.396000, 1681.452048, 1681.452048, 0.000000, X, Y)
[Mon Jun 10 15:45:56 2013] Writing source region out to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src6_src.reg
[Mon Jun 10 15:45:56 2013] Extracting stamp from image fullrun_mos2_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (195, 220) - (389, 413)
[Mon Jun 10 15:45:56 2013] XMMSAS bgd. selection expression = annulus(25359.120140, 27488.396000, 5604.840161, 11209.680323, X, Y) && !ellipse(24628.287600, 24182.329600, 1173.352034, 787.818423, 44.050200, X, Y) && !ellipse(23744.351227, 24761.248688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23901.645782, 26492.226898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24518.865753, 25435.198669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24476.390594, 26131.496033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30762.517609, 30075.358856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.412420, 27987.032000, 1172.328034, 658.521619, 88.992120, X, Y) && !ellipse(20659.618700, 30278.786600, 284.839208, 284.839208, 0.000000, X, Y) && !ellipse(31175.425200, 31650.097400, 1543.504044, 683.049620, 357.101830, X, Y) && !ellipse(31148.234000, 31441.888000, 1592.488046, 1592.488046, 0.000000, X, Y) && !ellipse(21320.745800, 27519.482480, 1349.840039, 362.498410, 14.557600, X, Y) && !ellipse(30870.512600, 29405.634600, 741.169621, 741.169621, 0.000000, X, Y) && !ellipse(20426.948400, 27712.232800, 1412.912041, 760.046422, 22.518700, X, Y) && !ellipse(27916.782867, 34500.721863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19204.802000, 30187.174000, 267.571208, 267.571208, 0.000000, X, Y) && !ellipse(30244.385986, 31187.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18871.607819, 27706.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32571.378600, 29052.610000, 1535.936044, 1535.936044, 0.000000, X, Y) && !ellipse(30991.370000, 29318.668000, 1235.168036, 1235.168036, 0.000000, X, Y) && !ellipse(31697.364000, 32166.442000, 1563.504045, 242.510407, 3.049510, X, Y) && !ellipse(32999.286865, 29932.743958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32267.228200, 26164.499400, 438.147213, 438.147213, 0.000000, X, Y) && !ellipse(28377.918976, 35179.734985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33294.263275, 29357.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23315.198000, 26930.136000, 2198.672063, 1381.200040, 39.624500, X, Y) && !ellipse(30311.632568, 29535.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19167.218000, 27919.753600, 1465.120042, 1465.120042, 0.000000, X, Y) && !ellipse(32140.217621, 31004.064209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32597.472076, 30871.843750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18529.163467, 30937.040649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25931.545776, 28222.767029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31256.323853, 30946.792572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18012.268000, 29299.444000, 1582.984046, 590.281617, 82.737570, X, Y) && !ellipse(19860.658000, 27728.590800, 1462.648042, 806.816023, 338.856100, X, Y) && !ellipse(18943.618000, 30829.919400, 1624.016047, 525.215215, 94.599390, X, Y) && !ellipse(26307.752808, 26133.917419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32248.035706, 28930.082764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20492.402600, 27652.901800, 2172.960063, 1016.560029, 28.909700, X, Y) && !ellipse(25659.004000, 27075.180000, 1132.088033, 1132.088033, 0.000000, X, Y) && !ellipse(17666.211243, 21172.944733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27716.763580, 15723.574097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33224.454590, 30787.458954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22347.810000, 36298.720000, 1707.408049, 1707.408049, 0.000000, X, Y) && !ellipse(32414.180400, 31581.293800, 1608.904046, 469.302414, 9.805870, X, Y) && !ellipse(27238.586000, 34699.712000, 1659.304048, 1659.304048, 0.000000, X, Y) && !ellipse(21263.185840, 21409.685200, 361.719210, 361.719210, 0.000000, X, Y) && !ellipse(22495.781219, 33423.130432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15155.521600, 23118.864800, 1094.760032, 450.940813, 2.604800, X, Y) && !ellipse(32917.830566, 31264.992523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22399.191254, 34063.836792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18614.330170, 29896.978058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31306.315399, 27797.035736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23206.578000, 33859.996000, 2147.408062, 2147.408062, 0.000000, X, Y) && !ellipse(21834.502400, 26343.191000, 575.356817, 575.356817, 0.000000, X, Y) && !ellipse(23625.679382, 34052.075012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18610.643600, 26574.354000, 1514.584044, 988.152028, 86.751800, X, Y) && !ellipse(21912.257553, 34397.842133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20743.103455, 19031.767151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30492.503784, 28935.836212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.581177, 29790.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21664.946884, 33517.529999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21672.810000, 25450.545400, 1757.392051, 847.776024, 46.866900, X, Y) && !ellipse(21390.294000, 35575.252000, 1677.624048, 1677.624048, 0.000000, X, Y) && !ellipse(17459.076000, 30512.086000, 1562.000045, 1562.000045, 0.000000, X, Y) && !ellipse(18336.952000, 20383.456600, 1598.656046, 1116.184032, 32.945000, X, Y) && !ellipse(22573.653229, 35534.096436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23468.652985, 35521.179718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23433.807420, 34806.474000, 1689.400049, 1689.400049, 0.000000, X, Y) && !ellipse(17287.593445, 30832.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19462.238998, 31312.119293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.851837, 28700.911255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.952087, 28052.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23823.675537, 35010.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22753.710000, 32852.868000, 1578.560045, 435.364813, 359.833526, X, Y) && !ellipse(21437.259537, 34303.538147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20311.488617, 16212.727402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20949.452000, 34670.722000, 1662.480048, 1662.480048, 0.000000, X, Y) && !ellipse(26361.328000, 33065.106000, 1513.960044, 1064.008031, 0.000000, X, Y) && !ellipse(32243.561981, 28238.184784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33813.555145, 30699.994324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34249.508301, 37014.692108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25146.735000, 29858.738000, 1266.584036, 1266.584036, 0.000000, X, Y) && !ellipse(24510.114777, 34670.874725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15974.186000, 29826.148600, 1705.080049, 1705.080049, 0.000000, X, Y) && !ellipse(17845.255000, 28118.733000, 1583.400046, 919.128026, 80.661180, X, Y) && !ellipse(15228.720200, 23130.516000, 1285.408037, 537.388015, 0.000000, X, Y) && !ellipse(26596.346527, 35351.913635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26977.260925, 35725.099243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18673.097916, 20145.297058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22125.800232, 36708.588470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18219.532623, 21167.223145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16895.084534, 31452.838501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16304.968430, 31661.483978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33274.172668, 38689.415558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19427.403687, 30758.604095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22844.657379, 36897.353088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17080.838348, 28854.597626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19672.063309, 30383.124542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34327.459961, 37962.803070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16289.583862, 30744.593506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26751.466614, 34246.776276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33829.089722, 38214.011322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.802734, 29873.783722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16414.496353, 30225.503418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33055.031860, 38046.186920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17717.166565, 28750.241699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23603.185974, 33326.938721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21349.451080, 26413.815918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17672.558090, 31576.727478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35065.114716, 31878.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20175.078522, 26057.078217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30254.305176, 27019.499786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35189.208130, 37437.338257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.287750, 27536.771179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34305.303741, 30052.780487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.964000, 32930.472000, 2709.048078, 2142.880062, 346.474000, X, Y) && !ellipse(22169.727692, 24491.258759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31396.666046, 27009.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32271.601746, 17473.210526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34177.410980, 36518.971588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27269.476105, 26003.916565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35442.720947, 32663.322113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33890.673126, 31700.573975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32269.278595, 38119.871948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34688.928925, 37439.387939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30080.780426, 36540.315369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27047.082886, 37143.317657, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 15:45:56 2013] Writing fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src6.gif
[Mon Jun 10 16:00:06 2013] Mean detx,y = (354.37, -3117.17) 
[Mon Jun 10 16:00:10 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 16:01:40 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 16:01:40 2013] Setting source spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 10 16:01:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src6_bgd.pi.gz