[Fri Jun  7 07:23:01 2013] Detection parameters:
  Position = (218.0, 357.0) = 20 48 38.45 29 42 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 446.0 +/- 41.8
  Background counts = 710.2
  Rate = 0.006 +/- 0.0006

[Fri Jun  7 07:23:12 2013] Off-axis axis estimate = 7.21'
[Sat Jun  8 11:42:54 2013] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:42:54 2013] Initial guess for spatial extent in simple fitting = 10.03"
[Sat Jun  8 11:42:54 2013] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.047
[Sat Jun  8 11:42:54 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 10.03"
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src38.ximg exists
[Sat Jun  8 18:05:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src38.csv
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sat Jun  8 18:05:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src38.csv
[Sat Jun  8 18:05:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sat Jun  8 18:05:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sat Jun  8 18:05:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sat Jun  8 18:05:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:06:16 2013] Spatial fit model total counts = 7395.230000, observed total counts = 7026.000000
[Sat Jun  8 18:06:16 2013] Offset between fit and detection position for source 58 = 2.070812 pixels
[Sat Jun  8 18:06:16 2013] Warning, changing simple spatial fit ID from 38 to 32
[Sat Jun  8 18:06:16 2013] 7316.366000 total counts/ 6699.840000 bgd. counts: snr = 7.532154
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 2.070812 pixels
  Position = (218.3, 354.9) = 20 48 38.36 29 42 9.1
  Extent = 20.3 (20.3-40.6)" x 6.5 (4.3-8.2)", rotation angle = 95 (88-103) degrees
  Source counts = 616.5 +/- 85.5
  Background counts = 6699.8
  Rate = 0.006 +/- 0.0008
[Sat Jun  8 18:06:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:06:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:06:17 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:06:17 2013] Source does appear to be extended
[Sat Jun  8 18:06:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.47
[Sat Jun  8 18:06:17 2013] Source is asymmetric
[Sat Jun  8 18:06:17 2013] Source is confused with source 22
[Mon Jun 10 02:24:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:24:18 2013] Initial guess for spatial extent in simple fitting = 13.38"
[Mon Jun 10 02:24:18 2013] source mask rpix=3.1, npix_max = 51, mask sum = 51, frac = 0.997
[Mon Jun 10 02:24:18 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 13.38"
[Mon Jun 10 10:41:21 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jun 10 10:41:21 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jun 10 10:41:21 2013] Fit fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src37 appears to have run properly
[Mon Jun 10 10:41:25 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jun 10 10:41:25 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jun 10 10:41:25 2013] Fit fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Jun 10 10:42:54 2013] Spatial fit model total counts = 7385.230000, observed total counts = 7026.000000
[Mon Jun 10 10:42:54 2013] Offset between fit and detection position for source 58 = 0.013997 pixels
[Mon Jun 10 10:42:54 2013] Warning, changing simple spatial fit ID from 37 to 32
[Mon Jun 10 10:42:54 2013] 7302.509000 total counts/ 6659.750000 bgd. counts: snr = 7.876245
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.013997 pixels
  Position = (218.3, 354.9) = 20 48 38.35 29 42 9.1
  Extent = 20.3 (20.3-40.6)" x 6.6 (4.2-8.2)", rotation angle = 95 (88-101) degrees
  Source counts = 642.8 +/- 85.5
  Background counts = 6659.8
  Rate = 0.006 +/- 0.0008
[Mon Jun 10 10:42:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:55 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:42:55 2013] Source does appear to be extended
[Mon Jun 10 10:42:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.46
[Mon Jun 10 10:42:55 2013] Source is asymmetric
[Mon Jun 10 15:45:59 2013] XMMSAS src. selection expression = ellipse(18943.618000, 30829.919400, 1218.012035, 393.911411, 94.599390, X, Y)
[Mon Jun 10 15:45:59 2013] Writing source region out to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src58_src.reg
[Mon Jun 10 15:45:59 2013] Extracting stamp from image fullrun_mos2_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (148, 285) - (288, 425)
[Mon Jun 10 15:45:59 2013] XMMSAS bgd. selection expression = annulus(18943.618000, 30829.919400, 2030.020058, 4060.040117, X, Y) && !ellipse(20659.618700, 30278.786600, 284.839208, 284.839208, 0.000000, X, Y) && !ellipse(21320.745800, 27519.482480, 1349.840039, 362.498410, 14.557600, X, Y) && !ellipse(20426.948400, 27712.232800, 1412.912041, 760.046422, 22.518700, X, Y) && !ellipse(19204.802000, 30187.174000, 267.571208, 267.571208, 0.000000, X, Y) && !ellipse(18871.607819, 27706.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23315.198000, 26930.136000, 2198.672063, 1381.200040, 39.624500, X, Y) && !ellipse(19167.218000, 27919.753600, 1465.120042, 1465.120042, 0.000000, X, Y) && !ellipse(18529.163467, 30937.040649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18012.268000, 29299.444000, 1582.984046, 590.281617, 82.737570, X, Y) && !ellipse(19860.658000, 27728.590800, 1462.648042, 806.816023, 338.856100, X, Y) && !ellipse(20492.402600, 27652.901800, 2172.960063, 1016.560029, 28.909700, X, Y) && !ellipse(22347.810000, 36298.720000, 1707.408049, 1707.408049, 0.000000, X, Y) && !ellipse(22495.781219, 33423.130432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22399.191254, 34063.836792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18614.330170, 29896.978058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23206.578000, 33859.996000, 2147.408062, 2147.408062, 0.000000, X, Y) && !ellipse(21834.502400, 26343.191000, 575.356817, 575.356817, 0.000000, X, Y) && !ellipse(23625.679382, 34052.075012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18610.643600, 26574.354000, 1514.584044, 988.152028, 86.751800, X, Y) && !ellipse(21912.257553, 34397.842133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21664.946884, 33517.529999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21672.810000, 25450.545400, 1757.392051, 847.776024, 46.866900, X, Y) && !ellipse(21390.294000, 35575.252000, 1677.624048, 1677.624048, 0.000000, X, Y) && !ellipse(17459.076000, 30512.086000, 1562.000045, 1562.000045, 0.000000, X, Y) && !ellipse(22573.653229, 35534.096436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23468.652985, 35521.179718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23433.807420, 34806.474000, 1689.400049, 1689.400049, 0.000000, X, Y) && !ellipse(17287.593445, 30832.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19462.238998, 31312.119293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23823.675537, 35010.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22753.710000, 32852.868000, 1578.560045, 435.364813, 359.833526, X, Y) && !ellipse(21437.259537, 34303.538147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20949.452000, 34670.722000, 1662.480048, 1662.480048, 0.000000, X, Y) && !ellipse(15974.186000, 29826.148600, 1705.080049, 1705.080049, 0.000000, X, Y) && !ellipse(17845.255000, 28118.733000, 1583.400046, 919.128026, 80.661180, X, Y) && !ellipse(16895.084534, 31452.838501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16304.968430, 31661.483978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19427.403687, 30758.604095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17080.838348, 28854.597626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19672.063309, 30383.124542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16289.583862, 30744.593506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16414.496353, 30225.503418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17717.166565, 28750.241699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23603.185974, 33326.938721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21349.451080, 26413.815918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17672.558090, 31576.727478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20175.078522, 26057.078217, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 15:45:59 2013] Writing fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src58.gif
[Mon Jun 10 16:36:55 2013] Mean detx,y = (-6216.59, -5552.64) 
[Mon Jun 10 16:36:58 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 16:37:26 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 16:37:26 2013] Setting source spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon Jun 10 16:37:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src58_bgd.pi.gz