[Fri Jun  7 07:22:59 2013] Detection parameters:
  Position = (360.9, 335.1) = 20 47 50.73 29 40 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 538.5 +/- 42.4
  Background counts = 496.2
  Rate = 0.008 +/- 0.0006

[Fri Jun  7 07:23:12 2013] Off-axis axis estimate = 5.25'
[Sat Jun  8 11:42:54 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:42:54 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Sat Jun  8 11:42:54 2013] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.350
[Sat Jun  8 11:42:54 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.05"
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun  8 18:05:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src20.csv
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun  8 18:05:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src20.csv
[Sat Jun  8 18:05:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun  8 18:05:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun  8 18:05:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun  8 18:05:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:06:16 2013] Spatial fit model total counts = 9489.360000, observed total counts = 9498.000000
[Sat Jun  8 18:06:16 2013] Offset between fit and detection position for source 25 = 1.542592 pixels
[Sat Jun  8 18:06:16 2013] Warning, changing simple spatial fit ID from 20 to 13
[Sat Jun  8 18:06:16 2013] 9375.987000 total counts/ 8754.340000 bgd. counts: snr = 6.644038
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.542592 pixels
  Position = (359.6, 335.8) = 20 47 51.18 29 40 46.1
  Extent = 18.0 (17.9-35.9)", rotation angle = 0
  Source counts = 621.6 +/- 96.8
  Background counts = 8754.3
  Rate = 0.006 +/- 0.0009
[Sat Jun  8 18:06:16 2013] Spatial fit model total counts = 8158.690000, observed total counts = 6898.000000
[Sat Jun  8 18:06:16 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 18:06:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:06:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:06:17 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:06:17 2013] Source does appear to be extended
[Sat Jun  8 18:06:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:06:17 2013] Source is confused with source 21
[Mon Jun 10 02:24:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:24:18 2013] Initial guess for spatial extent in simple fitting = 17.96"
[Mon Jun 10 02:24:18 2013] source mask rpix=4.1, npix_max = 85, mask sum = 80, frac = 0.934
[Mon Jun 10 02:24:18 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 17.96"
[Mon Jun 10 10:41:20 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src20.ximg exists
[Mon Jun 10 10:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src20.csv
[Mon Jun 10 10:41:20 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon Jun 10 10:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src20.csv
[Mon Jun 10 10:41:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:24 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon Jun 10 10:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon Jun 10 10:41:24 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Jun 10 10:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon Jun 10 10:41:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:54 2013] Spatial fit model total counts = 19727.800000, observed total counts = 17543.000000
[Mon Jun 10 10:42:54 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:42:55 2013] Spatial fit model total counts = 8825.760000, observed total counts = 8825.000000
[Mon Jun 10 10:42:55 2013] Offset between fit and detection position for source 25 = 3.314873 pixels
[Mon Jun 10 10:42:55 2013] Warning, changing simple spatial fit ID from 20 to 65
[Mon Jun 10 10:42:55 2013] 8599.338000 total counts/ 8120.100000 bgd. counts: snr = 5.318272
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.314873 pixels
  Position = (356.8, 337.6) = 20 47 52.13 29 40 53.6
  Extent = 15.4 (11.5-17.4)", rotation angle = 0
  Source counts = 479.2 +/- 92.7
  Background counts = 8120.1
  Rate = 0.005 +/- 0.0009
[Mon Jun 10 10:42:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:55 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:42:55 2013] Source does appear to be extended
[Mon Jun 10 10:42:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 15:45:57 2013] XMMSAS src. selection expression = ellipse(30991.370000, 29318.668000, 926.376027, 926.376027, 0.000000, X, Y)
[Mon Jun 10 15:45:57 2013] Writing source region out to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src25_src.reg
[Mon Jun 10 15:45:57 2013] Extracting stamp from image fullrun_mos2_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (304, 284) - (410, 391)
[Mon Jun 10 15:45:57 2013] XMMSAS bgd. selection expression = annulus(30991.370000, 29318.668000, 1543.960044, 3087.920089, X, Y) && !ellipse(30762.517609, 30075.358856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31175.425200, 31650.097400, 1543.504044, 683.049620, 357.101830, X, Y) && !ellipse(31148.234000, 31441.888000, 1592.488046, 1592.488046, 0.000000, X, Y) && !ellipse(30870.512600, 29405.634600, 741.169621, 741.169621, 0.000000, X, Y) && !ellipse(30244.385986, 31187.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32571.378600, 29052.610000, 1535.936044, 1535.936044, 0.000000, X, Y) && !ellipse(31697.364000, 32166.442000, 1563.504045, 242.510407, 3.049510, X, Y) && !ellipse(32999.286865, 29932.743958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32267.228200, 26164.499400, 438.147213, 438.147213, 0.000000, X, Y) && !ellipse(33294.263275, 29357.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30311.632568, 29535.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32140.217621, 31004.064209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32597.472076, 30871.843750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31256.323853, 30946.792572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32248.035706, 28930.082764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33224.454590, 30787.458954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32414.180400, 31581.293800, 1608.904046, 469.302414, 9.805870, X, Y) && !ellipse(32917.830566, 31264.992523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31306.315399, 27797.035736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30492.503784, 28935.836212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.581177, 29790.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.851837, 28700.911255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.952087, 28052.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32243.561981, 28238.184784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33813.555145, 30699.994324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.802734, 29873.783722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30254.305176, 27019.499786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.287750, 27536.771179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34305.303741, 30052.780487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.964000, 32930.472000, 2709.048078, 2142.880062, 346.474000, X, Y) && !ellipse(31396.666046, 27009.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27269.476105, 26003.916565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33890.673126, 31700.573975, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 15:45:57 2013] Writing fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src25.gif
[Mon Jun 10 16:15:41 2013] Mean detx,y = (5762.63, -5604.87) 
[Mon Jun 10 16:15:43 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 16:15:59 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 16:15:59 2013] Setting source spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Jun 10 16:15:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src25_bgd.pi.gz