[Fri Jun  7 07:22:58 2013] Detection parameters:
  Position = (354.1, 346.3) = 20 47 53.00 29 41 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 783.7 +/- 42.6
  Background counts = 623.3
  Rate = 0.01 +/- 0.0007

[Fri Jun  7 07:23:12 2013] Off-axis axis estimate = 5.32'
[Sat Jun  8 11:42:54 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:42:54 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Sat Jun  8 11:42:54 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Sat Jun  8 11:42:54 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.09"
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun  8 18:05:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src7.csv
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun  8 18:05:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src7.csv
[Sat Jun  8 18:05:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun  8 18:05:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun  8 18:05:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun  8 18:05:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:06:16 2013] Warning, spatial fit 7 centroid is now closest to src. 18
[Sat Jun  8 18:06:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:06:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:06:17 2013] Assessing source extent using major
[Sat Jun  8 18:06:17 2013] Source does appear to be extended
[Sat Jun  8 18:06:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:06:17 2013] Source is confused with source 25
[Mon Jun 10 02:24:18 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:24:18 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Mon Jun 10 02:24:18 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Mon Jun 10 02:24:18 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 9.09"
[Mon Jun 10 10:41:20 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jun 10 10:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src7.csv
[Mon Jun 10 10:41:20 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jun 10 10:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src7.csv
[Mon Jun 10 10:41:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:24 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jun 10 10:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 10 10:41:24 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jun 10 10:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 10 10:41:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:54 2013] Spatial fit model total counts = 10004.000000, observed total counts = 7743.000000
[Mon Jun 10 10:42:54 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:42:54 2013] Source 21 is offset by 4.369168 and -5.452473 pixels which is larger than
2 X fitted extent = 5.292092 x 5.292092, not incorporating fit results
[Mon Jun 10 10:42:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:55 2013] Assessing source extent using major
[Mon Jun 10 10:42:55 2013] Source does appear to be extended
[Mon Jun 10 10:42:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 15:45:56 2013] XMMSAS src. selection expression = ellipse(30762.517609, 30075.358856, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 15:45:56 2013] Writing source region out to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src21_src.reg
[Mon Jun 10 15:45:56 2013] Extracting stamp from image fullrun_mos2_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (317, 309) - (392, 384)
[Mon Jun 10 15:45:56 2013] XMMSAS bgd. selection expression = annulus(30762.517609, 30075.358856, 1087.500000, 2175.000000, X, Y) && !ellipse(31175.425200, 31650.097400, 1543.504044, 683.049620, 357.101830, X, Y) && !ellipse(31148.234000, 31441.888000, 1592.488046, 1592.488046, 0.000000, X, Y) && !ellipse(30870.512600, 29405.634600, 741.169621, 741.169621, 0.000000, X, Y) && !ellipse(30244.385986, 31187.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32571.378600, 29052.610000, 1535.936044, 1535.936044, 0.000000, X, Y) && !ellipse(30991.370000, 29318.668000, 1235.168036, 1235.168036, 0.000000, X, Y) && !ellipse(31697.364000, 32166.442000, 1563.504045, 242.510407, 3.049510, X, Y) && !ellipse(32999.286865, 29932.743958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33294.263275, 29357.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30311.632568, 29535.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32140.217621, 31004.064209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32597.472076, 30871.843750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31256.323853, 30946.792572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32248.035706, 28930.082764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33224.454590, 30787.458954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32414.180400, 31581.293800, 1608.904046, 469.302414, 9.805870, X, Y) && !ellipse(32917.830566, 31264.992523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31306.315399, 27797.035736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30492.503784, 28935.836212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.581177, 29790.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.952087, 28052.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32243.561981, 28238.184784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.802734, 29873.783722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.287750, 27536.771179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.964000, 32930.472000, 2709.048078, 2142.880062, 346.474000, X, Y)
[Mon Jun 10 15:45:56 2013] Writing fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src21.gif
[Mon Jun 10 16:01:55 2013] Mean detx,y = (5528.55, -6177.96) 
[Mon Jun 10 16:01:57 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 16:02:09 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 16:02:09 2013] Setting source spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jun 10 16:02:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src21_bgd.pi.gz