[Fri Jun  7 07:22:58 2013] Detection parameters:
  Position = (364.2, 363.1) = 20 47 49.63 29 42 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 575.7 +/- 45.5
  Background counts = 536.6
  Rate = 0.009 +/- 0.0007

[Fri Jun  7 07:23:12 2013] Off-axis axis estimate = 6.69'
[Sat Jun  8 11:42:54 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:42:54 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Sat Jun  8 11:42:54 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.193
[Sat Jun  8 11:42:54 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.77"
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun  8 18:05:04 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun  8 18:05:04 2013] Fit fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src11 appears to have run properly
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun  8 18:05:06 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun  8 18:05:06 2013] Fit fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Jun  8 18:06:16 2013] Warning, spatial fit 11 centroid is now closest to src. 38
[Sat Jun  8 18:06:16 2013] Spatial fit model total counts = 7650.870000, observed total counts = 7660.000000
[Sat Jun  8 18:06:16 2013] Offset between fit and detection position for source 17 = 5.757593 pixels
[Sat Jun  8 18:06:16 2013] Warning, changing simple spatial fit ID from 11 to 22
[Sat Jun  8 18:06:16 2013] 7670.227000 total counts/ 6932.120000 bgd. counts: snr = 8.865154
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 5.757593 pixels
  Position = (358.6, 362.0) = 20 47 51.52 29 42 39.7
  Extent = 19.9 (19.9-39.8)", rotation angle = 0
  Source counts = 738.1 +/- 87.6
  Background counts = 6932.1
  Rate = 0.007 +/- 0.0009
[Sat Jun  8 18:06:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:06:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:06:17 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:06:17 2013] Source does appear to be extended
[Sat Jun  8 18:06:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:06:17 2013] Source is confused with source 19
[Mon Jun 10 02:24:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:24:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 02:24:18 2013] Initial guess for spatial extent in simple fitting = 19.91"
[Mon Jun 10 02:24:18 2013] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.970
[Mon Jun 10 02:24:18 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 19.91"
[Mon Jun 10 10:41:20 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jun 10 10:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src11.csv
[Mon Jun 10 10:41:20 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jun 10 10:41:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src11.csv
[Mon Jun 10 10:41:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:24 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jun 10 10:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 10 10:41:24 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jun 10 10:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 10 10:41:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:54 2013] Warning, spatial fit 11 centroid is now closest to src. 18
[Mon Jun 10 10:42:54 2013] Source 17 is offset by -5.802966 and -1.451793 pixels which is larger than
2 X fitted extent = 4.245145 x 4.245145, not incorporating fit results
[Mon Jun 10 10:42:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:55 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:42:55 2013] Source does appear to be extended
[Mon Jun 10 10:42:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 15:45:56 2013] XMMSAS src. selection expression = ellipse(31148.234000, 31441.888000, 1194.366034, 1194.366034, 0.000000, X, Y)
[Mon Jun 10 15:45:56 2013] Writing source region out to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src17_src.reg
[Mon Jun 10 15:45:56 2013] Extracting stamp from image fullrun_mos2_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (290, 293) - (427, 431)
[Mon Jun 10 15:45:57 2013] XMMSAS bgd. selection expression = annulus(31148.234000, 31441.888000, 1990.610057, 3981.220115, X, Y) && !ellipse(30762.517609, 30075.358856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.412420, 27987.032000, 1172.328034, 658.521619, 88.992120, X, Y) && !ellipse(31175.425200, 31650.097400, 1543.504044, 683.049620, 357.101830, X, Y) && !ellipse(30870.512600, 29405.634600, 741.169621, 741.169621, 0.000000, X, Y) && !ellipse(27916.782867, 34500.721863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30244.385986, 31187.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32571.378600, 29052.610000, 1535.936044, 1535.936044, 0.000000, X, Y) && !ellipse(30991.370000, 29318.668000, 1235.168036, 1235.168036, 0.000000, X, Y) && !ellipse(31697.364000, 32166.442000, 1563.504045, 242.510407, 3.049510, X, Y) && !ellipse(32999.286865, 29932.743958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28377.918976, 35179.734985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33294.263275, 29357.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30311.632568, 29535.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32140.217621, 31004.064209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32597.472076, 30871.843750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31256.323853, 30946.792572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32248.035706, 28930.082764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33224.454590, 30787.458954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32414.180400, 31581.293800, 1608.904046, 469.302414, 9.805870, X, Y) && !ellipse(27238.586000, 34699.712000, 1659.304048, 1659.304048, 0.000000, X, Y) && !ellipse(32917.830566, 31264.992523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31306.315399, 27797.035736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30492.503784, 28935.836212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.581177, 29790.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.851837, 28700.911255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.952087, 28052.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.328000, 33065.106000, 1513.960044, 1064.008031, 0.000000, X, Y) && !ellipse(32243.561981, 28238.184784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33813.555145, 30699.994324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26596.346527, 35351.913635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26977.260925, 35725.099243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26751.466614, 34246.776276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.802734, 29873.783722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35065.114716, 31878.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30254.305176, 27019.499786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.287750, 27536.771179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34305.303741, 30052.780487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.964000, 32930.472000, 2709.048078, 2142.880062, 346.474000, X, Y) && !ellipse(31396.666046, 27009.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35442.720947, 32663.322113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33890.673126, 31700.573975, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 15:45:57 2013] Writing fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src17.gif
[Mon Jun 10 16:06:20 2013] Mean detx,y = (5744.63, -7748.65) 
[Mon Jun 10 16:06:23 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 16:06:42 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 16:06:42 2013] Setting source spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun 10 16:06:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src17_bgd.pi.gz