[Fri Jun  7 07:23:06 2013] Detection parameters:
  Position = (360.4, 320.1) = 20 47 50.92 29 39 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 304.0 +/- 31.8
  Background counts = 394.4
  Rate = 0.004 +/- 0.0004

[Fri Jun  7 07:23:12 2013] Off-axis axis estimate = 4.76'
[Sat Jun  8 11:42:54 2013] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:42:54 2013] Initial guess for spatial extent in simple fitting = 8.81"
[Sat Jun  8 11:42:54 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.824
[Sat Jun  8 11:42:54 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 8.81"
[Sat Jun  8 18:05:05 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src63.ximg exists
[Sat Jun  8 18:05:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src63.csv
[Sat Jun  8 18:05:05 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src63_1.ximg exists
[Sat Jun  8 18:05:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src63.csv
[Sat Jun  8 18:05:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:07 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sat Jun  8 18:05:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sat Jun  8 18:05:07 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sat Jun  8 18:05:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sat Jun  8 18:05:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:06:16 2013] Source 123 is offset by -2.001340 and -5.337888 pixels which is larger than
2 X fitted extent = 1.074809 x 1.074809, not incorporating fit results
[Sat Jun  8 18:06:16 2013] Spatial fit model total counts = 5311.760000, observed total counts = 4531.000000
[Sat Jun  8 18:06:16 2013] Poor agreement between spatial fit and data for source 123
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 18:06:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:06:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:06:17 2013] Assessing source extent using major
[Sat Jun  8 18:06:17 2013] Source does appear to be extended
[Sat Jun  8 18:06:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 02:24:18 2013] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:24:18 2013] Initial guess for spatial extent in simple fitting = 8.81"
[Mon Jun 10 02:24:18 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.824
[Mon Jun 10 02:24:18 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 8.81"
[Mon Jun 10 10:41:21 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src56.ximg exists
[Mon Jun 10 10:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src56.csv
[Mon Jun 10 10:41:21 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src56_1.ximg exists
[Mon Jun 10 10:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src56.csv
[Mon Jun 10 10:41:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:41:25 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Mon Jun 10 10:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Mon Jun 10 10:41:25 2013] fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Mon Jun 10 10:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Mon Jun 10 10:41:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:54 2013] Source 123 is offset by 3.554614 and 2.218066 pixels which is larger than
2 X fitted extent = 2.206805 x 2.206805, not incorporating fit results
[Mon Jun 10 10:42:55 2013] Spatial fit model total counts = 5293.060000, observed total counts = 4531.000000
[Mon Jun 10 10:42:55 2013] Poor agreement between spatial fit and data for source 123
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:42:55 2013] Source 123 is offset by 6.490016 and 3.701790 pixels which is larger than
2 X fitted extent = 0.973678 x 0.973678, not incorporating fit results
[Mon Jun 10 10:42:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:55 2013] Assessing source extent using major
[Mon Jun 10 10:42:55 2013] Source does appear to be extended
[Mon Jun 10 10:42:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 15:46:00 2013] XMMSAS src. selection expression = ellipse(31306.315399, 27797.035736, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 15:46:00 2013] Writing source region out to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src123_src.reg
[Mon Jun 10 15:46:00 2013] Extracting stamp from image fullrun_mos2_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (323, 283) - (398, 358)
[Mon Jun 10 15:46:00 2013] XMMSAS bgd. selection expression = annulus(31306.315399, 27797.035736, 1087.500000, 2175.000000, X, Y) && !ellipse(30762.517609, 30075.358856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31148.234000, 31441.888000, 1592.488046, 1592.488046, 0.000000, X, Y) && !ellipse(30870.512600, 29405.634600, 741.169621, 741.169621, 0.000000, X, Y) && !ellipse(32571.378600, 29052.610000, 1535.936044, 1535.936044, 0.000000, X, Y) && !ellipse(30991.370000, 29318.668000, 1235.168036, 1235.168036, 0.000000, X, Y) && !ellipse(32999.286865, 29932.743958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32267.228200, 26164.499400, 438.147213, 438.147213, 0.000000, X, Y) && !ellipse(33294.263275, 29357.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30311.632568, 29535.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32248.035706, 28930.082764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33224.454590, 30787.458954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30492.503784, 28935.836212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.581177, 29790.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.952087, 28052.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32243.561981, 28238.184784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33813.555145, 30699.994324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.802734, 29873.783722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30254.305176, 27019.499786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.287750, 27536.771179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34305.303741, 30052.780487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31396.666046, 27009.654938, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 15:46:00 2013] Writing fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src123.gif
[Mon Jun 10 16:54:19 2013] Mean detx,y = (6200.83, -4123.14) 
[Mon Jun 10 16:54:21 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 16:54:34 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 16:54:35 2013] Setting source spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src123_src_b10.pi.gz
[Mon Jun 10 16:54:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693400101_pi300-10000_pass1_cl_src123_bgd.pi.gz