[Fri Jun  7 07:21:22 2013] Detection parameters:
  Position = (201.4, 247.9) = 20 48 43.94 29 34 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.2 +/- 27.3
  Background counts = 363.8
  Rate = 0.002 +/- 0.0003

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 7.93'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 10.39"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.4, npix_max = 33, mask sum = 16, frac = 0.479
[Sat Jun  8 06:29:13 2013] Skipping simple spatial due to low active detector fraction
[Sat Jun  8 18:05:56 2013] Source 89 is offset by 1.675505 and -0.318525 pixels which is larger than
2 X fitted extent = 1.220984 x 1.220984, not incorporating fit results
[Sat Jun  8 18:05:56 2013] Source 89 is offset by -9.361001 and -0.282020 pixels which is larger than
2 X fitted extent = 1.149448 x 1.149448, not incorporating fit results
[Sat Jun  8 18:05:56 2013] Spatial fit model total counts = 4056.730000, observed total counts = 3814.000000
[Sat Jun  8 18:05:56 2013] Offset between fit and detection position for source 89 = 2.732096 pixels
[Sat Jun  8 18:05:56 2013] Warning, changing simple spatial fit ID from -1 to 91
[Sat Jun  8 18:05:56 2013] 4055.995000 total counts/ 3736.570000 bgd. counts: snr = 5.225554
Spatial fit parameters:
  Offset between fit and detection position for source 89 = 2.732096 pixels
  Position = (199.0, 246.7) = 20 48 44.76 29 34 18.2
  Extent = 21.4 (21.3-42.7)" x 19.2 (14.9-21.4)", rotation angle = 86 (79-90) degrees
  Source counts = 319.4 +/- 63.7
  Background counts = 3736.6
  Rate = 0.003 +/- 0.0006
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Sat Jun  8 18:05:57 2013] Source is confused with source 2
[Sun Jun  9 16:44:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:44:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 16:44:57 2013] Initial guess for spatial extent in simple fitting = 20.28"
[Sun Jun  9 16:44:57 2013] source mask rpix=4.7, npix_max = 106, mask sum = 75, frac = 0.704
[Sun Jun  9 16:44:57 2013] Giving source the simple spatial ID 98 for pass 1, mean size = 20.28"
[Mon Jun 10 02:24:14 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src98.ximg exists
[Mon Jun 10 02:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src98.csv
[Mon Jun 10 02:24:14 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src98_1.ximg exists
[Mon Jun 10 02:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src98.csv
[Mon Jun 10 02:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:24:17 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src98.ximg exists
[Mon Jun 10 02:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src98.csv
[Mon Jun 10 02:24:17 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src98_1.ximg exists
[Mon Jun 10 02:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src98.csv
[Mon Jun 10 02:24:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:32 2013] Source 89 is offset by -0.777586 and -1.521310 pixels which is larger than
2 X fitted extent = 1.220984 x 1.220984, not incorporating fit results
[Mon Jun 10 10:42:34 2013] Spatial fit model total counts = 11795.400000, observed total counts = 10091.000000
[Mon Jun 10 10:42:34 2013] Poor agreement between spatial fit and data for source 89
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:42:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:34 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:42:34 2013] Source does appear to be extended
[Mon Jun 10 10:42:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Mon Jun 10 10:46:26 2013] XMMSAS src. selection expression = ellipse(17263.656000, 21415.340000, 1281.486037, 1152.390033, 86.265000, X, Y)
[Mon Jun 10 10:46:26 2013] Writing source region out to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src89_src.reg
[Mon Jun 10 10:46:26 2013] Extracting stamp from image fullrun_mos1_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (125, 173) - (273, 320)
[Mon Jun 10 10:46:26 2013] XMMSAS bgd. selection expression = annulus(17263.656000, 21415.340000, 2135.810061, 4271.620123, X, Y) && !ellipse(21733.479828, 26073.911102, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(16515.086121, 22317.047302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20220.657410, 26235.583801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16344.175247, 21119.403412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18920.338200, 26998.076000, 1482.072043, 507.531215, 2.636490, X, Y) && !ellipse(21257.549896, 21405.168198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15118.508000, 22984.112000, 1389.056040, 1389.056040, 0.000000, X, Y) && !ellipse(17627.877060, 28298.240600, 2839.536082, 973.192028, 100.672400, X, Y) && !ellipse(19127.551315, 26360.022369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21781.038000, 25232.101200, 1297.040037, 830.304024, 33.804000, X, Y) && !ellipse(19143.559814, 20660.116531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18254.415726, 20700.966812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20740.980759, 19041.167282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16982.738998, 20235.650360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18709.274017, 20481.138351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16557.962189, 21853.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16887.776000, 20712.998000, 1250.752036, 900.368026, 46.423000, X, Y) && !ellipse(15436.710129, 22404.031372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15731.885666, 21974.167526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21978.323975, 24151.107025, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:46:26 2013] Writing fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src89.gif
[Mon Jun 10 12:51:33 2013] Mean detx,y = (3999.00, 6824.67) 
[Mon Jun 10 12:51:35 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 12:52:32 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 12:52:32 2013] Setting source spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Mon Jun 10 12:52:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src89_bgd.pi.gz