[Fri Jun  7 07:21:22 2013] Detection parameters:
  Position = (214.2, 309.7) = 20 48 39.72 29 38 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 468.6 +/- 37.8
  Background counts = 637.2
  Rate = 0.006 +/- 0.0005

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 6.16'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.831
[Sat Jun  8 06:29:13 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 9.51"
[Sat Jun  8 11:42:50 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src39.ximg exists
[Sat Jun  8 11:42:50 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Jun  8 11:42:50 2013] Fit fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src39 appears to have run properly
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Jun  8 11:42:52 2013] Fit fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sat Jun  8 18:05:56 2013] Source 83 is offset by 4.873107 and -4.606507 pixels which is larger than
2 X fitted extent = 1.087389 x 1.087389, not incorporating fit results
[Sat Jun  8 18:05:56 2013] Spatial fit model total counts = 6865.430000, observed total counts = 6324.000000
[Sat Jun  8 18:05:56 2013] Offset between fit and detection position for source 83 = 4.616044 pixels
[Sat Jun  8 18:05:56 2013] 6758.914000 total counts/ 5977.000000 bgd. counts: snr = 10.113870
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 4.616044 pixels
  Position = (216.3, 313.8) = 20 48 39.00 29 39 10.0
  Extent = 14.9 (11.7-19.0)", rotation angle = 0
  Source counts = 781.9 +/- 82.2
  Background counts = 5977.0
  Rate = 0.008 +/- 0.0008
[Sat Jun  8 18:05:56 2013] Spatial fit model total counts = 7175.840000, observed total counts = 7293.000000
[Sat Jun  8 18:05:56 2013] Offset between fit and detection position for source 83 = 3.388948 pixels
[Sat Jun  8 18:05:56 2013] Warning, changing simple spatial fit ID from 39 to 55
[Sat Jun  8 18:05:56 2013] 7218.569000 total counts/ 6955.380000 bgd. counts: snr = 3.155784
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 3.388948 pixels
  Position = (218.0, 310.8) = 20 48 38.43 29 38 57.3
  Extent = 18.5 (14.6-37.1)" x 6.4 (2.8-11.4)", rotation angle = 2 (348-17) degrees
  Source counts = 263.2 +/- 85.0
  Background counts = 6955.4
  Rate = 0.003 +/- 0.0009
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Sat Jun  8 18:05:57 2013] Source is confused with source 46
[Sun Jun  9 16:44:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:44:57 2013] Initial guess for spatial extent in simple fitting = 12.47"
[Sun Jun  9 16:44:57 2013] source mask rpix=2.9, npix_max = 45, mask sum = 39, frac = 0.860
[Sun Jun  9 16:44:57 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 12.47"
[Mon Jun 10 02:24:12 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jun 10 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src37.csv
[Mon Jun 10 02:24:12 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jun 10 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src37.csv
[Mon Jun 10 02:24:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:24:16 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jun 10 02:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jun 10 02:24:16 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jun 10 02:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jun 10 02:24:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:32 2013] Warning, spatial fit 37 centroid is now closest to src. 75
[Mon Jun 10 10:42:32 2013] Spatial fit model total counts = 7180.430000, observed total counts = 7293.000000
[Mon Jun 10 10:42:32 2013] Offset between fit and detection position for source 83 = 0.041927 pixels
[Mon Jun 10 10:42:32 2013] Warning, changing simple spatial fit ID from 37 to 52
[Mon Jun 10 10:42:32 2013] 7202.938000 total counts/ 6943.630000 bgd. counts: snr = 3.111878
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.041927 pixels
  Position = (218.0, 310.9) = 20 48 38.43 29 38 57.5
  Extent = 18.5 (14.5-37.1)" x 6.3 (2.6-11.1)", rotation angle = 3 (349-20) degrees
  Source counts = 259.3 +/- 84.9
  Background counts = 6943.6
  Rate = 0.003 +/- 0.0009
[Mon Jun 10 10:42:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:34 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:42:34 2013] Source does appear to be extended
[Mon Jun 10 10:42:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.31
[Mon Jun 10 10:46:23 2013] XMMSAS src. selection expression = ellipse(18920.338200, 26998.076000, 1111.554032, 380.648411, 2.636490, X, Y)
[Mon Jun 10 10:46:23 2013] Writing source region out to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src83_src.reg
[Mon Jun 10 10:46:23 2013] Extracting stamp from image fullrun_mos1_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (154, 247) - (282, 375)
[Mon Jun 10 10:46:23 2013] XMMSAS bgd. selection expression = annulus(18920.338200, 26998.076000, 1852.590053, 3705.180107, X, Y) && !ellipse(21733.479828, 26073.911102, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23954.873020, 26399.168000, 2035.136059, 1343.112039, 53.677700, X, Y) && !ellipse(20220.657410, 26235.583801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20596.524600, 30249.463600, 1222.312035, 373.589611, 2.106630, X, Y) && !ellipse(18094.083817, 29335.638489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24840.058000, 28682.336000, 2538.000073, 1500.256043, 252.706000, X, Y) && !ellipse(17067.482224, 28641.759857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18932.803589, 27961.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17659.332062, 29892.801697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20943.046800, 31170.669800, 1513.544044, 708.569620, 357.024780, X, Y) && !ellipse(20425.775800, 27714.558000, 1419.784041, 746.866421, 19.082300, X, Y) && !ellipse(21337.900000, 27490.886400, 1737.536050, 421.055212, 10.615200, X, Y) && !ellipse(17509.068000, 29216.272000, 1676.104048, 473.594414, 63.850600, X, Y) && !ellipse(19528.230400, 27763.452600, 1465.688042, 1014.072029, 4.756000, X, Y) && !ellipse(15118.508000, 22984.112000, 1389.056040, 1389.056040, 0.000000, X, Y) && !ellipse(17034.805450, 30831.017365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17446.879272, 27704.797363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17784.001617, 30671.460724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16401.958000, 28986.662000, 1645.808047, 738.687221, 92.837570, X, Y) && !ellipse(17627.877060, 28298.240600, 2839.536082, 973.192028, 100.672400, X, Y) && !ellipse(19127.551315, 26360.022369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16605.842987, 29880.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21781.038000, 25232.101200, 1297.040037, 830.304024, 33.804000, X, Y) && !ellipse(15119.536346, 29793.806274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16039.124329, 29613.298798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17005.779343, 29783.101196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14585.117447, 29350.408417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17267.909058, 28057.738373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.575867, 31158.711700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21809.337997, 31173.723236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17533.090080, 31563.612200, 1693.680049, 243.661607, 92.662570, X, Y) && !ellipse(16432.620911, 30648.107086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14258.768000, 28928.666000, 1817.880052, 794.867223, 315.118900, X, Y) && !ellipse(21978.323975, 24151.107025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16989.903595, 29106.782928, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:46:23 2013] Writing fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src83.gif
[Mon Jun 10 11:53:21 2013] Mean detx,y = (-1773.57, 5570.79) 
[Mon Jun 10 11:53:23 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 11:53:43 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 11:53:43 2013] Setting source spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Mon Jun 10 11:53:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src83_bgd.pi.gz