[Fri Jun  7 07:21:20 2013] Detection parameters:
  Position = (238.7, 356.9) = 20 48 31.55 29 42 7.7
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 446.2 +/- 42.1
  Background counts = 3394.2
  Rate = 0.007 +/- 0.0007

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 6.06'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.909
[Sat Jun  8 06:29:13 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.46"
[Sat Jun  8 11:42:50 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src33.ximg exists
[Sat Jun  8 11:42:50 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Jun  8 11:42:50 2013] Fit fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src33 appears to have run properly
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Jun  8 11:42:52 2013] Fit fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat Jun  8 18:05:56 2013] Spatial fit model total counts = 7956.250000, observed total counts = 7418.000000
[Sat Jun  8 18:05:56 2013] Offset between fit and detection position for source 51 = 3.231395 pixels
[Sat Jun  8 18:05:56 2013] 7881.420000 total counts/ 7289.260000 bgd. counts: snr = 6.935813
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 3.231395 pixels
  Position = (241.3, 358.8) = 20 48 30.68 29 42 26.2
  Extent = 18.9 (18.7-37.8)" x 8.9 (6.1-12.5)", rotation angle = 357 (342-16) degrees
  Source counts = 592.2 +/- 88.8
  Background counts = 7289.3
  Rate = 0.006 +/- 0.0009
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.49
[Sat Jun  8 18:05:57 2013] Source is confused with source 10
[Sun Jun  9 16:44:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:44:57 2013] Initial guess for spatial extent in simple fitting = 13.89"
[Sun Jun  9 16:44:57 2013] source mask rpix=3.2, npix_max = 54, mask sum = 54, frac = 0.990
[Sun Jun  9 16:44:57 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 13.89"
[Mon Jun 10 02:24:12 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src31.ximg exists
[Mon Jun 10 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src31.csv
[Mon Jun 10 02:24:12 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon Jun 10 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src31.csv
[Mon Jun 10 02:24:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:24:15 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon Jun 10 02:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Mon Jun 10 02:24:15 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon Jun 10 02:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Mon Jun 10 02:24:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:32 2013] Warning, spatial fit 31 centroid is now closest to src. 37
[Mon Jun 10 10:42:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:34 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:42:34 2013] Source does appear to be extended
[Mon Jun 10 10:42:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.49
[Mon Jun 10 10:46:23 2013] XMMSAS src. selection expression = ellipse(20943.046800, 31170.669800, 1135.158033, 531.427215, 357.024780, X, Y)
[Mon Jun 10 10:46:23 2013] Writing source region out to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src51_src.reg
[Mon Jun 10 10:46:23 2013] Extracting stamp from image fullrun_mos1_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (176, 294) - (307, 424)
[Mon Jun 10 10:46:23 2013] XMMSAS bgd. selection expression = annulus(20943.046800, 31170.669800, 1891.930054, 3783.860109, X, Y) && !ellipse(21733.479828, 26073.911102, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23954.873020, 26399.168000, 2035.136059, 1343.112039, 53.677700, X, Y) && !ellipse(25278.607520, 27321.639800, 948.144027, 948.144027, 0.000000, X, Y) && !ellipse(20596.524600, 30249.463600, 1222.312035, 373.589611, 2.106630, X, Y) && !ellipse(18094.083817, 29335.638489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24914.888200, 29859.447000, 2139.912062, 1055.912030, 9.049390, X, Y) && !ellipse(24840.058000, 28682.336000, 2538.000073, 1500.256043, 252.706000, X, Y) && !ellipse(17067.482224, 28641.759857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18932.803589, 27961.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17659.332062, 29892.801697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20425.775800, 27714.558000, 1419.784041, 746.866421, 19.082300, X, Y) && !ellipse(21337.900000, 27490.886400, 1737.536050, 421.055212, 10.615200, X, Y) && !ellipse(17509.068000, 29216.272000, 1676.104048, 473.594414, 63.850600, X, Y) && !ellipse(18920.338200, 26998.076000, 1482.072043, 507.531215, 2.636490, X, Y) && !ellipse(19528.230400, 27763.452600, 1465.688042, 1014.072029, 4.756000, X, Y) && !ellipse(17034.805450, 30831.017365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17446.879272, 27704.797363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17784.001617, 30671.460724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16401.958000, 28986.662000, 1645.808047, 738.687221, 92.837570, X, Y) && !ellipse(17627.877060, 28298.240600, 2839.536082, 973.192028, 100.672400, X, Y) && !ellipse(24955.726929, 30770.626068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16605.842987, 29880.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.715200, 29225.728800, 1269.000037, 1269.000037, 0.000000, X, Y) && !ellipse(25464.091000, 28992.545000, 1049.792030, 1049.792030, 0.000000, X, Y) && !ellipse(17005.779343, 29783.101196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17267.909058, 28057.738373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24130.201324, 30952.479645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.575867, 31158.711700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21809.337997, 31173.723236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17533.090080, 31563.612200, 1693.680049, 243.661607, 92.662570, X, Y) && !ellipse(16432.620911, 30648.107086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16989.903595, 29106.782928, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:46:23 2013] Writing fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src51.gif
[Mon Jun 10 11:46:44 2013] Mean detx,y = (-6075.30, 4095.16) 
[Mon Jun 10 11:46:46 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 11:47:24 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 11:47:25 2013] Setting source spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Mon Jun 10 11:47:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src51_bgd.pi.gz