[Fri Jun  7 07:21:19 2013] Detection parameters:
  Position = (371.0, 345.0) = 20 47 47.38 29 41 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 403.1 +/- 38.0
  Background counts = 416.8
  Rate = 0.007 +/- 0.0007

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 6.25'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 9.55"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.238
[Sat Jun  8 06:29:13 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 9.55"
[Sat Jun  8 11:42:50 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src32.ximg exists
[Sat Jun  8 11:42:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src32.csv
[Sat Jun  8 11:42:50 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src32_1.ximg exists
[Sat Jun  8 11:42:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src32.csv
[Sat Jun  8 11:42:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sat Jun  8 11:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sat Jun  8 11:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sat Jun  8 11:42:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:56 2013] Source 36 is offset by 7.543930 and 2.478107 pixels which is larger than
2 X fitted extent = 1.748667 x 1.748667, not incorporating fit results
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:05:57 2013] Source is confused with source 12
[Sun Jun  9 16:44:57 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:44:57 2013] Initial guess for spatial extent in simple fitting = 9.55"
[Sun Jun  9 16:44:57 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.238
[Sun Jun  9 16:44:57 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 9.55"
[Mon Jun 10 02:24:12 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src30.ximg exists
[Mon Jun 10 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src30.csv
[Mon Jun 10 02:24:12 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon Jun 10 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src30.csv
[Mon Jun 10 02:24:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:24:15 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon Jun 10 02:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Jun 10 02:24:15 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Jun 10 02:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Jun 10 02:24:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:32 2013] Source 36 is offset by 7.593723 and 5.362728 pixels which is larger than
2 X fitted extent = 1.048621 x 1.048621, not incorporating fit results
[Mon Jun 10 10:42:32 2013] Source 36 is offset by -1.768520 and -5.716421 pixels which is larger than
2 X fitted extent = 8.753242 x 1.150175, not incorporating fit results
[Mon Jun 10 10:42:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:34 2013] Assessing source extent using major
[Mon Jun 10 10:42:34 2013] Source does appear to be extended
[Mon Jun 10 10:42:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:46:22 2013] XMMSAS src. selection expression = ellipse(32226.991943, 29964.219330, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:46:22 2013] Writing source region out to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src36_src.reg
[Mon Jun 10 10:46:22 2013] Extracting stamp from image fullrun_mos1_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (333, 307) - (408, 382)
[Mon Jun 10 10:46:23 2013] XMMSAS bgd. selection expression = annulus(32226.991943, 29964.219330, 1087.500000, 2175.000000, X, Y) && !ellipse(30821.167206, 30128.722290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30735.135780, 29388.730000, 653.539219, 653.539219, 0.000000, X, Y) && !ellipse(33347.810000, 29703.025800, 1566.608045, 1566.608045, 0.000000, X, Y) && !ellipse(33059.357600, 29412.714200, 2526.768073, 1421.320041, 318.356000, X, Y) && !ellipse(32225.866211, 29016.039337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31047.720856, 28841.441956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32923.326477, 30044.674683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29697.595760, 29617.179294, 901.664026, 901.664026, 0.000000, X, Y) && !ellipse(29647.756000, 29546.978000, 1297.480037, 1297.480037, 0.000000, X, Y) && !ellipse(32073.358673, 28238.083893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29009.664000, 29479.767000, 2686.704077, 1145.632033, 325.139000, X, Y) && !ellipse(30267.289600, 27767.307400, 883.080025, 883.080025, 0.000000, X, Y) && !ellipse(29200.983368, 30358.377014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31045.158752, 27540.374054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28842.002000, 29188.238000, 2582.880074, 2582.880074, 0.000000, X, Y) && !ellipse(32646.138763, 31801.401367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30335.599518, 27190.305786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33339.499664, 30911.178009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32012.813385, 27710.139282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35545.222800, 31739.592400, 1765.568051, 883.072025, 100.405700, X, Y) && !ellipse(34143.564400, 30050.962000, 1088.784031, 1088.784031, 0.000000, X, Y) && !ellipse(29402.962067, 27971.574707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34918.575684, 31640.965912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34404.142000, 31102.826000, 936.784027, 936.784027, 0.000000, X, Y) && !ellipse(32104.714569, 32411.604095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33341.273224, 32233.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34840.411621, 32564.185974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34390.731964, 31705.392853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32901.764984, 32233.212677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33903.589844, 31870.355133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33186.936371, 32871.335693, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:46:23 2013] Writing fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src36.gif
[Mon Jun 10 11:46:13 2013] Mean detx,y = (-6097.09, -7308.22) 
[Mon Jun 10 11:46:14 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 11:46:28 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 11:46:29 2013] Setting source spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Mon Jun 10 11:46:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Mon Jun 10 14:07:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 14:07:12 2013] rmf not generated due to insufficient counts