[Fri Jun  7 07:21:19 2013] Detection parameters:
  Position = (259.0, 358.7) = 20 48 24.78 29 42 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 303.4 +/- 27.7
  Background counts = 1079.7
  Rate = 0.003 +/- 0.0003

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 5.22'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 9.04"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.128
[Sat Jun  8 06:29:13 2013] Giving source the simple spatial ID 86 for pass 0, mean size = 9.04"
[Sat Jun  8 11:42:51 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src86.ximg exists
[Sat Jun  8 11:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src86.csv
[Sat Jun  8 11:42:51 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src86_1.ximg exists
[Sat Jun  8 11:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src86.csv
[Sat Jun  8 11:42:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:42:53 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Sat Jun  8 11:42:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sat Jun  8 11:42:53 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Sat Jun  8 11:42:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sat Jun  8 11:42:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:56 2013] Warning, spatial fit 86 centroid is now closest to src. 31
[Sat Jun  8 18:05:56 2013] Spatial fit model total counts = 9247.000000, observed total counts = 6513.000000
[Sat Jun  8 18:05:56 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 16:44:57 2013] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:44:57 2013] Initial guess for spatial extent in simple fitting = 9.04"
[Sun Jun  9 16:44:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.128
[Sun Jun  9 16:44:57 2013] Giving source the simple spatial ID 82 for pass 1, mean size = 9.04"
[Mon Jun 10 02:24:13 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src82.ximg exists
[Mon Jun 10 02:24:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src82.csv
[Mon Jun 10 02:24:13 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src82_1.ximg exists
[Mon Jun 10 02:24:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src82.csv
[Mon Jun 10 02:24:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:24:17 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Mon Jun 10 02:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Mon Jun 10 02:24:17 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Mon Jun 10 02:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Mon Jun 10 02:24:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:34 2013] Spatial fit model total counts = 12153.200000, observed total counts = 6978.000000
[Mon Jun 10 10:42:34 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:42:34 2013] Spatial fit model total counts = 9259.780000, observed total counts = 6513.000000
[Mon Jun 10 10:42:34 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:42:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:34 2013] Assessing source extent using major
[Mon Jun 10 10:42:34 2013] Source does appear to be extended
[Mon Jun 10 10:42:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:46:25 2013] XMMSAS src. selection expression = ellipse(22480.575867, 31158.711700, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:46:25 2013] Writing source region out to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src32_src.reg
[Mon Jun 10 10:46:25 2013] Extracting stamp from image fullrun_mos1_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (221, 321) - (296, 396)
[Mon Jun 10 10:46:25 2013] XMMSAS bgd. selection expression = annulus(22480.575867, 31158.711700, 1087.500000, 2175.000000, X, Y) && !ellipse(20596.524600, 30249.463600, 1222.312035, 373.589611, 2.106630, X, Y) && !ellipse(24914.888200, 29859.447000, 2139.912062, 1055.912030, 9.049390, X, Y) && !ellipse(24840.058000, 28682.336000, 2538.000073, 1500.256043, 252.706000, X, Y) && !ellipse(20943.046800, 31170.669800, 1513.544044, 708.569620, 357.024780, X, Y) && !ellipse(20425.775800, 27714.558000, 1419.784041, 746.866421, 19.082300, X, Y) && !ellipse(21337.900000, 27490.886400, 1737.536050, 421.055212, 10.615200, X, Y) && !ellipse(19528.230400, 27763.452600, 1465.688042, 1014.072029, 4.756000, X, Y) && !ellipse(17627.877060, 28298.240600, 2839.536082, 973.192028, 100.672400, X, Y) && !ellipse(24955.726929, 30770.626068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.715200, 29225.728800, 1269.000037, 1269.000037, 0.000000, X, Y) && !ellipse(25464.091000, 28992.545000, 1049.792030, 1049.792030, 0.000000, X, Y) && !ellipse(24130.201324, 30952.479645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21809.337997, 31173.723236, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:46:25 2013] Writing fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src32.gif
[Mon Jun 10 12:40:55 2013] Mean detx,y = (-6107.44, 2612.83) 
[Mon Jun 10 12:40:56 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 12:41:11 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 12:41:12 2013] Setting source spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Jun 10 12:41:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Jun 10 15:09:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 15:09:21 2013] rmf not generated due to insufficient counts