[Fri Jun  7 07:21:18 2013] Detection parameters:
  Position = (371.4, 353.9) = 20 47 47.23 29 42 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 473.6 +/- 39.3
  Background counts = 470.1
  Rate = 0.009 +/- 0.0007

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 6.64'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.998
[Sat Jun  8 06:29:13 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 9.75"
[Sat Jun  8 11:42:49 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jun  8 11:42:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src16.csv
[Sat Jun  8 11:42:49 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jun  8 11:42:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src16.csv
[Sat Jun  8 11:42:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jun  8 11:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jun  8 11:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun  8 11:42:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:56 2013] Source 21 is offset by 4.001429 and -7.002786 pixels which is larger than
2 X fitted extent = 1.120883 x 1.120883, not incorporating fit results
[Sat Jun  8 18:05:56 2013] Spatial fit model total counts = 6502.640000, observed total counts = 6503.000000
[Sat Jun  8 18:05:56 2013] Offset between fit and detection position for source 21 = 1.799380 pixels
[Sat Jun  8 18:05:56 2013] Warning, changing simple spatial fit ID from 16 to 19
[Sat Jun  8 18:05:56 2013] 6360.702000 total counts/ 6212.370000 bgd. counts: snr = 1.881942
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.799380 pixels
  Position = (370.0, 352.8) = 20 47 47.72 29 41 59.9
  Extent = 11.7 (5.7-19.6)", rotation angle = 0
  Source counts = 148.3 +/- 79.8
  Background counts = 6212.4
  Rate = 0.002 +/- 0.0008
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:05:57 2013] Deleting source due to low Poisson probability 0.9