[Fri Jun  7 07:21:26 2013] Detection parameters:
  Position = (196.2, 238.0) = 20 48 45.68 29 33 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.7 +/- 30.7
  Background counts = 335.4
  Rate = 0.003 +/- 0.0004

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 8.61'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 10.73"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022
[Sat Jun  8 06:29:13 2013] Giving source the simple spatial ID 100 for pass 0, mean size = 10.73"
[Sat Jun  8 11:42:51 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src100.ximg exists
[Sat Jun  8 11:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src100.csv
[Sat Jun  8 11:42:51 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src100_1.ximg exists
[Sat Jun  8 11:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src100.csv
[Sat Jun  8 11:42:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:42:54 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Sat Jun  8 11:42:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src100.csv
[Sat Jun  8 11:42:54 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Sat Jun  8 11:42:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src100.csv
[Sat Jun  8 11:42:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:56 2013] Spatial fit model total counts = 3554.490000, observed total counts = 3406.000000
[Sat Jun  8 18:05:56 2013] Offset between fit and detection position for source 144 = 3.289162 pixels
[Sat Jun  8 18:05:56 2013] Warning, changing simple spatial fit ID from 100 to 12
[Sat Jun  8 18:05:56 2013] 3397.355000 total counts/ 3090.190000 bgd. counts: snr = 5.525596
Spatial fit parameters:
  Offset between fit and detection position for source 144 = 3.289162 pixels
  Position = (193.8, 240.2) = 20 48 46.50 29 33 49.8
  Extent = 21.8 (15.3-43.6)" x 9.3 (5.5-13.6)", rotation angle = 74 (50-103) degrees
  Source counts = 307.2 +/- 58.3
  Background counts = 3090.2
  Rate = 0.003 +/- 0.0006
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Sat Jun  8 18:05:57 2013] Source is confused with source 18
[Sun Jun  9 16:44:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:44:57 2013] Initial guess for spatial extent in simple fitting = 15.53"
[Sun Jun  9 16:44:57 2013] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.966
[Sun Jun  9 16:44:57 2013] Giving source the simple spatial ID 93 for pass 1, mean size = 15.53"
[Mon Jun 10 02:24:14 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src93.ximg exists
[Mon Jun 10 02:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src93.csv
[Mon Jun 10 02:24:14 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src93_1.ximg exists
[Mon Jun 10 02:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src93.csv
[Mon Jun 10 02:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:24:17 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Mon Jun 10 02:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src93.csv
[Mon Jun 10 02:24:17 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Mon Jun 10 02:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src93.csv
[Mon Jun 10 02:24:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:32 2013] Spatial fit model total counts = 3553.310000, observed total counts = 3406.000000
[Mon Jun 10 10:42:32 2013] Offset between fit and detection position for source 144 = 1.777503 pixels
[Mon Jun 10 10:42:32 2013] Warning, changing simple spatial fit ID from 93 to 12
[Mon Jun 10 10:42:32 2013] 3097.136000 total counts/ 2807.940000 bgd. counts: snr = 5.457558
Spatial fit parameters:
  Offset between fit and detection position for source 144 = 1.777503 pixels
  Position = (194.7, 238.6) = 20 48 46.20 29 33 43.1
  Extent = 15.6 (10.5-21.8)" x 11.3 (4.9-21.8)", rotation angle = 46
  Source counts = 289.2 +/- 55.7
  Background counts = 2807.9
  Rate = 0.003 +/- 0.0006
[Mon Jun 10 10:42:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:34 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:42:34 2013] Source does appear to be extended
[Mon Jun 10 10:42:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.48
[Mon Jun 10 10:46:26 2013] XMMSAS src. selection expression = ellipse(16887.776000, 20712.998000, 938.064027, 675.276019, 46.423000, X, Y)
[Mon Jun 10 10:46:26 2013] Writing source region out to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src144_src.reg
[Mon Jun 10 10:46:26 2013] Extracting stamp from image fullrun_mos1_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (141, 185) - (249, 293)
[Mon Jun 10 10:46:26 2013] XMMSAS bgd. selection expression = annulus(16887.776000, 20712.998000, 1563.440045, 3126.880090, X, Y) && !ellipse(21733.479828, 26073.911102, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(16515.086121, 22317.047302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16344.175247, 21119.403412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15118.508000, 22984.112000, 1389.056040, 1389.056040, 0.000000, X, Y) && !ellipse(19143.559814, 20660.116531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18254.415726, 20700.966812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20740.980759, 19041.167282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16982.738998, 20235.650360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18709.274017, 20481.138351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16557.962189, 21853.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15436.710129, 22404.031372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17263.656000, 21415.340000, 1708.648049, 1536.520044, 86.265000, X, Y) && !ellipse(15731.885666, 21974.167526, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:46:26 2013] Writing fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src144.gif
[Mon Jun 10 12:48:53 2013] Mean detx,y = (4720.15, 7070.67) 
[Mon Jun 10 12:48:54 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 12:49:20 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 12:49:20 2013] Setting source spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src144_src_b10.pi.gz
[Mon Jun 10 12:49:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src144_bgd.pi.gz