[Fri Jun  7 07:21:17 2013] Detection parameters:
  Position = (208.5, 337.7) = 20 48 41.61 29 40 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 578.3 +/- 39.0
  Background counts = 685.7
  Rate = 0.009 +/- 0.0006

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 7.11'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.864
[Sat Jun  8 06:29:13 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 9.99"
[Sat Jun  8 11:42:49 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun  8 11:42:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src14.csv
[Sat Jun  8 11:42:49 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun  8 11:42:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src14.csv
[Sat Jun  8 11:42:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun  8 11:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun  8 11:42:52 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun  8 11:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun  8 11:42:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:56 2013] Warning, spatial fit 14 centroid is now closest to src. 37
[Sat Jun  8 18:05:56 2013] Source 14 is offset by -3.520830 and -1.307558 pixels which is larger than
2 X fitted extent = 1.117968 x 1.117968, not incorporating fit results
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:05:57 2013] Source is confused with source 74
[Sun Jun  9 16:44:57 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:44:57 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Jun  9 16:44:57 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.864
[Sun Jun  9 16:44:57 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 9.99"
[Mon Jun 10 02:24:11 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src14.ximg exists
[Mon Jun 10 02:24:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src14.csv
[Mon Jun 10 02:24:11 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Jun 10 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src14.csv
[Mon Jun 10 02:24:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:24:14 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Jun 10 02:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Jun 10 02:24:14 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Jun 10 02:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Jun 10 02:24:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:32 2013] Warning, spatial fit 14 centroid is now closest to src. 46
[Mon Jun 10 10:42:32 2013] Source 14 is offset by -3.887083 and 2.171247 pixels which is larger than
2 X fitted extent = 1.177816 x 1.177816, not incorporating fit results
[Mon Jun 10 10:42:32 2013] Source 14 is offset by -3.520830 and -1.307558 pixels which is larger than
2 X fitted extent = 1.117968 x 1.117968, not incorporating fit results
[Mon Jun 10 10:42:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:34 2013] Assessing source extent using major
[Mon Jun 10 10:42:34 2013] Source does appear to be extended
[Mon Jun 10 10:42:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:46:21 2013] XMMSAS src. selection expression = ellipse(18094.083817, 29335.638489, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:46:21 2013] Writing source region out to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src14_src.reg
[Mon Jun 10 10:46:21 2013] Extracting stamp from image fullrun_mos1_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (171, 300) - (246, 375)
[Mon Jun 10 10:46:21 2013] XMMSAS bgd. selection expression = annulus(18094.083817, 29335.638489, 1087.500000, 2175.000000, X, Y) && !ellipse(21733.479828, 26073.911102, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20596.524600, 30249.463600, 1222.312035, 373.589611, 2.106630, X, Y) && !ellipse(17067.482224, 28641.759857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18932.803589, 27961.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17659.332062, 29892.801697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20943.046800, 31170.669800, 1513.544044, 708.569620, 357.024780, X, Y) && !ellipse(20425.775800, 27714.558000, 1419.784041, 746.866421, 19.082300, X, Y) && !ellipse(21337.900000, 27490.886400, 1737.536050, 421.055212, 10.615200, X, Y) && !ellipse(17509.068000, 29216.272000, 1676.104048, 473.594414, 63.850600, X, Y) && !ellipse(18920.338200, 26998.076000, 1482.072043, 507.531215, 2.636490, X, Y) && !ellipse(19528.230400, 27763.452600, 1465.688042, 1014.072029, 4.756000, X, Y) && !ellipse(17034.805450, 30831.017365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17446.879272, 27704.797363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17784.001617, 30671.460724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16401.958000, 28986.662000, 1645.808047, 738.687221, 92.837570, X, Y) && !ellipse(17627.877060, 28298.240600, 2839.536082, 973.192028, 100.672400, X, Y) && !ellipse(19127.551315, 26360.022369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16605.842987, 29880.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15119.536346, 29793.806274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16039.124329, 29613.298798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17005.779343, 29783.101196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17267.909058, 28057.738373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17533.090080, 31563.612200, 1693.680049, 243.661607, 92.662570, X, Y) && !ellipse(16432.620911, 30648.107086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14258.768000, 28928.666000, 1817.880052, 794.867223, 315.118900, X, Y) && !ellipse(16989.903595, 29106.782928, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:46:21 2013] Writing fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src14.gif
[Mon Jun 10 11:20:50 2013] Mean detx,y = (-3970.50, 6867.47) 
[Mon Jun 10 11:20:52 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 11:21:11 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 11:21:11 2013] Setting source spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jun 10 11:21:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Jun 10 13:44:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 13:44:21 2013] rmf not generated due to insufficient counts