[Fri Jun  7 07:21:23 2013] Detection parameters:
  Position = (331.0, 348.6) = 20 48 0.73 29 41 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.0 +/- 39.6
  Background counts = 846.1
  Rate = 0.003 +/- 0.0005

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 4.33'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.816
[Sat Jun  8 06:29:13 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 8.59"
[Sat Jun  8 11:42:51 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src85.ximg exists
[Sat Jun  8 11:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src85.csv
[Sat Jun  8 11:42:51 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src85_1.ximg exists
[Sat Jun  8 11:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src85.csv
[Sat Jun  8 11:42:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:42:53 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sat Jun  8 11:42:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src85.csv
[Sat Jun  8 11:42:53 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sat Jun  8 11:42:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src85.csv
[Sat Jun  8 11:42:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:56 2013] Spatial fit model total counts = 7863.610000, observed total counts = 6374.000000
[Sat Jun  8 18:05:56 2013] Poor agreement between spatial fit and data for source 104
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 18:05:56 2013] Spatial fit model total counts = 7991.160000, observed total counts = 6942.000000
[Sat Jun  8 18:05:56 2013] Poor agreement between spatial fit and data for source 104
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 18:05:57 2013] Source is confused with source 73
[Sun Jun  9 16:44:57 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:44:57 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Sun Jun  9 16:44:57 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.816
[Sun Jun  9 16:44:57 2013] Giving source the simple spatial ID 81 for pass 1, mean size = 8.59"
[Mon Jun 10 02:24:13 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src81.ximg exists
[Mon Jun 10 02:24:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src81.csv
[Mon Jun 10 02:24:13 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src81_1.ximg exists
[Mon Jun 10 02:24:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src81.csv
[Mon Jun 10 02:24:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:24:17 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Mon Jun 10 02:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src81.csv
[Mon Jun 10 02:24:17 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Mon Jun 10 02:24:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src81.csv
[Mon Jun 10 02:24:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:32 2013] Source 104 is offset by 2.957407 and -2.820340 pixels which is larger than
2 X fitted extent = 2.568083 x 8.028460, not incorporating fit results
[Mon Jun 10 10:42:34 2013] Spatial fit model total counts = 8000.570000, observed total counts = 6942.000000
[Mon Jun 10 10:42:34 2013] Poor agreement between spatial fit and data for source 104
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:42:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:34 2013] Assessing source extent using major
[Mon Jun 10 10:42:34 2013] Source does appear to be extended
[Mon Jun 10 10:42:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:46:25 2013] XMMSAS src. selection expression = ellipse(28747.196381, 30275.487000, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:46:25 2013] Writing source region out to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src104_src.reg
[Mon Jun 10 10:46:25 2013] Extracting stamp from image fullrun_mos1_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (293, 311) - (368, 386)
[Mon Jun 10 10:46:25 2013] XMMSAS bgd. selection expression = annulus(28747.196381, 30275.487000, 1087.500000, 2175.000000, X, Y) && !ellipse(26548.565800, 28213.327600, 1189.240034, 753.916022, 105.053600, X, Y) && !ellipse(30821.167206, 30128.722290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30735.135780, 29388.730000, 653.539219, 653.539219, 0.000000, X, Y) && !ellipse(33059.357600, 29412.714200, 2526.768073, 1421.320041, 318.356000, X, Y) && !ellipse(31047.720856, 28841.441956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26755.734000, 28677.344000, 1943.152056, 1187.352034, 127.262600, X, Y) && !ellipse(24914.888200, 29859.447000, 2139.912062, 1055.912030, 9.049390, X, Y) && !ellipse(24840.058000, 28682.336000, 2538.000073, 1500.256043, 252.706000, X, Y) && !ellipse(29697.595760, 29617.179294, 901.664026, 901.664026, 0.000000, X, Y) && !ellipse(27837.599274, 30315.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.756000, 29546.978000, 1297.480037, 1297.480037, 0.000000, X, Y) && !ellipse(29009.664000, 29479.767000, 2686.704077, 1145.632033, 325.139000, X, Y) && !ellipse(30267.289600, 27767.307400, 883.080025, 883.080025, 0.000000, X, Y) && !ellipse(29200.983368, 30358.377014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31045.158752, 27540.374054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28842.002000, 29188.238000, 2582.880074, 2582.880074, 0.000000, X, Y) && !ellipse(28940.551544, 28139.768158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.306000, 28518.700000, 1298.312037, 1298.312037, 0.000000, X, Y) && !ellipse(29402.962067, 27971.574707, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:46:25 2013] Writing fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src104.gif
[Mon Jun 10 12:40:28 2013] Mean detx,y = (-5969.24, -3731.94) 
[Mon Jun 10 12:40:29 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 12:40:43 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 12:40:43 2013] Setting source spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Mon Jun 10 12:40:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Mon Jun 10 15:09:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 15:09:12 2013] rmf not generated due to insufficient counts