[Fri Jun  7 07:21:23 2013] Detection parameters:
  Position = (287.4, 354.2) = 20 48 15.28 29 42 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 337.3 +/- 48.6
  Background counts = 1239.5
  Rate = 0.004 +/- 0.0006

[Fri Jun  7 07:21:27 2013] Off-axis axis estimate = 4.12'
[Sat Jun  8 06:29:13 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 06:29:13 2013] Initial guess for spatial extent in simple fitting = 8.49"
[Sat Jun  8 06:29:13 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040
[Sat Jun  8 06:29:13 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 8.49"
[Sat Jun  8 11:42:50 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src56.ximg exists
[Sat Jun  8 11:42:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src56.csv
[Sat Jun  8 11:42:50 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src56_1.ximg exists
[Sat Jun  8 11:42:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src56.csv
[Sat Jun  8 11:42:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:42:53 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sat Jun  8 11:42:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sat Jun  8 11:42:53 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sat Jun  8 11:42:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sat Jun  8 11:42:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 18:05:56 2013] Source 100 is offset by 6.446631 and 7.050369 pixels which is larger than
2 X fitted extent = 1.493499 x 1.493499, not incorporating fit results
[Sat Jun  8 18:05:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 18:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 18:05:56 2013] Assessing source extent using major
[Sat Jun  8 18:05:56 2013] Source does appear to be extended
[Sat Jun  8 18:05:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 16:44:57 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:44:57 2013] Initial guess for spatial extent in simple fitting = 8.49"
[Sun Jun  9 16:44:57 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040
[Sun Jun  9 16:44:57 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 8.49"
[Mon Jun 10 02:24:13 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src53.ximg exists
[Mon Jun 10 02:24:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src53.csv
[Mon Jun 10 02:24:13 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon Jun 10 02:24:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src53.csv
[Mon Jun 10 02:24:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:24:16 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon Jun 10 02:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Jun 10 02:24:16 2013] fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Jun 10 02:24:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Jun 10 02:24:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693400101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:42:32 2013] Source 100 is offset by 6.367183 and 7.050369 pixels which is larger than
2 X fitted extent = 1.375674 x 1.375674, not incorporating fit results
[Mon Jun 10 10:42:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:42:34 2013] Assessing source extent using major
[Mon Jun 10 10:42:34 2013] Source does appear to be extended
[Mon Jun 10 10:42:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:42:34 2013] Source is confused with source 23
[Mon Jun 10 10:46:24 2013] XMMSAS src. selection expression = ellipse(24955.726929, 30770.626068, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:46:24 2013] Writing source region out to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src100_src.reg
[Mon Jun 10 10:46:24 2013] Extracting stamp from image fullrun_mos1_xmm0693400101_pi300-10000_cl_sm2.00.img.gz, (250, 317) - (325, 392)
[Mon Jun 10 10:46:24 2013] XMMSAS bgd. selection expression = annulus(24955.726929, 30770.626068, 1087.500000, 2175.000000, X, Y) && !ellipse(21733.479828, 26073.911102, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26548.565800, 28213.327600, 1189.240034, 753.916022, 105.053600, X, Y) && !ellipse(26755.734000, 28677.344000, 1943.152056, 1187.352034, 127.262600, X, Y) && !ellipse(24914.888200, 29859.447000, 2139.912062, 1055.912030, 9.049390, X, Y) && !ellipse(24840.058000, 28682.336000, 2538.000073, 1500.256043, 252.706000, X, Y) && !ellipse(27837.599274, 30315.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21337.900000, 27490.886400, 1737.536050, 421.055212, 10.615200, X, Y) && !ellipse(29009.664000, 29479.767000, 2686.704077, 1145.632033, 325.139000, X, Y) && !ellipse(24628.715200, 29225.728800, 1269.000037, 1269.000037, 0.000000, X, Y) && !ellipse(25464.091000, 28992.545000, 1049.792030, 1049.792030, 0.000000, X, Y) && !ellipse(28842.002000, 29188.238000, 2582.880074, 2582.880074, 0.000000, X, Y) && !ellipse(24130.201324, 30952.479645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.575867, 31158.711700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.306000, 28518.700000, 1298.312037, 1298.312037, 0.000000, X, Y)
[Mon Jun 10 10:46:24 2013] Writing fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src100.gif
[Mon Jun 10 12:18:01 2013] Mean detx,y = (-6023.01, 114.65) 
[Mon Jun 10 12:18:03 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 12:18:18 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 12:18:18 2013] Setting source spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Mon Jun 10 12:18:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693400101_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Mon Jun 10 14:47:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 14:47:05 2013] rmf not generated due to insufficient counts