[Sun Jun 23 19:31:37 2013] Detection parameters:
  Position = (282.5, 280.3) = 11 17 4.84 18 5 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 543.9 +/- 32.1
  Background counts = 119.6
  Rate = 0.02 +/- 0.001

[Sun Jun 23 19:31:38 2013] Off-axis axis estimate = 1.75'
[Sun Jun 23 19:34:27 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 19:34:27 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Jun 23 19:34:27 2013] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.316
[Sun Jun 23 19:34:27 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.30"
[Sun Jun 23 20:46:58 2013] fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun 23 20:46:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_src10.csv
[Sun Jun 23 20:46:58 2013] fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun 23 20:46:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_src10.csv
[Sun Jun 23 20:46:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 20:46:58 2013] fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun 23 20:46:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun 23 20:46:58 2013] fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun 23 20:46:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun 23 20:46:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693300101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 21:19:38 2013] Source 12 is offset by 7.168088 and 6.056455 pixels which is larger than
2 X fitted extent = 0.839522 x 0.839522, not incorporating fit results
[Sun Jun 23 21:19:39 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 21:19:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 21:19:39 2013] Assessing source extent using major
[Sun Jun 23 21:19:39 2013] Source does appear to be extended
[Sun Jun 23 21:19:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 21:19:50 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 21:19:50 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Jun 23 21:19:50 2013] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.316
[Sun Jun 23 21:19:50 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.30"
[Sun Jun 23 22:34:42 2013] fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jun 23 22:34:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_src10.csv
[Sun Jun 23 22:34:42 2013] fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jun 23 22:34:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_src10.csv
[Sun Jun 23 22:34:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 22:34:43 2013] fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jun 23 22:34:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 23 22:34:43 2013] fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jun 23 22:34:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 23 22:34:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693300101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 23:18:52 2013] Source 12 is offset by 7.168088 and 6.056455 pixels which is larger than
2 X fitted extent = 0.839522 x 0.839522, not incorporating fit results
[Sun Jun 23 23:18:52 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 23:18:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 23:18:52 2013] Assessing source extent using major
[Sun Jun 23 23:18:52 2013] Source does appear to be extended
[Sun Jun 23 23:18:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 23:19:05 2013] XMMSAS src. selection expression = ellipse(24524.815674, 24341.103577, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 23:19:05 2013] Writing source region out to fullrun_pn_xmm0693300101_pi300-10000_pass1_cl_src12_src.reg
[Sun Jun 23 23:19:05 2013] Extracting stamp from image fullrun_pn_xmm0693300101_pi300-10000_cl_sm2.00.img.gz, (245, 243) - (320, 318)
[Sun Jun 23 23:19:05 2013] XMMSAS bgd. selection expression = annulus(24524.815674, 24341.103577, 1087.500000, 2175.000000, X, Y) && !ellipse(25435.198669, 24601.325653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26692.968353, 22383.784119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25684.041290, 22164.980499, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 23:19:05 2013] Writing fullrun_pn_xmm0693300101_pi300-10000_pass1_cl_src12.gif
[Sun Jun 23 23:28:14 2013] Mean detx,y = (-3015.34, 2249.47) 
[Sun Jun 23 23:28:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 23:28:39 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 23:28:39 2013] Setting source spectrum file to fullrun_pn_xmm0693300101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Jun 23 23:28:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693300101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Jun 24 00:08:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 24 00:08:11 2013] rmf not generated due to insufficient counts
[Mon Jun 24 00:45:59 2013] Updating aperture counts using extracted products
[Mon Jun 24 00:45:59 2013] Total counts from fullrun_pn_xmm0693300101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 1027.00
[Mon Jun 24 00:45:59 2013] Total counts from fullrun_pn_xmm0693300101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 3807.00
[Mon Jun 24 00:45:59 2013] Got source and background scale factors 1339200.000000, 8108825.000000
[Mon Jun 24 00:45:59 2013] User source parameters:
  Position = (282.5, 280.3) = 11 17 4.84 18 5 53.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 398.3 +/- 33.1
  Background aperture counts = 628.7
  Rate = 0.01 +/- 0.0009

[Mon Jun 24 00:45:59 2013] Updating counts from extracted products
[Mon Jun 24 00:45:59 2013] Set source signif. to 398.26/25.07 = 15.88
[Mon Jun 24 00:46:16 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 00:46:16 2013] Using photon index=1.80, rate=0.0105, arf fullrun_pn_xmm0693300101_pi300-10000_pass1_cl_src12.arf
[Mon Jun 24 00:46:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 00:46:16 2013] Updating source flux to 3.4e-14
[Mon Jun 24 00:46:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 00:46:41 2013] xmm0693300101/analysis//spectral/fullrun_pn_xmm0693300101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete