[Wed Jul 31 19:45:49 2013] Detection parameters:
  Position = (232.7, 493.3) = 4 4 10.90 -43 7 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.5 +/- 15.6
  Background counts = 48.3
  Rate = 0.001 +/- 0.0002

[Wed Jul 31 19:45:49 2013] Off-axis axis estimate = 14.91'
[Wed Jul 31 20:35:20 2013] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Wed Jul 31 20:35:20 2013] Initial guess for spatial extent in simple fitting = 13.88"
[Wed Jul 31 20:35:20 2013] source mask rpix=3.2, npix_max = 54, mask sum = 43, frac = 0.789
[Wed Jul 31 20:35:20 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 13.88"
[Wed Jul 31 20:57:15 2013] fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_src22.ximg exists
[Wed Jul 31 20:57:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_src22.csv
[Wed Jul 31 20:57:15 2013] fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Jul 31 20:57:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_src22.csv
[Wed Jul 31 20:57:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 20:57:15 2013] fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Jul 31 20:57:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed Jul 31 20:57:15 2013] fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Jul 31 20:57:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed Jul 31 20:57:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693160101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 20:57:26 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 16.753080 pixels away
[Wed Jul 31 20:57:26 2013] Vigneting correction estimate = 1.000000
[Wed Jul 31 20:57:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 31 20:57:26 2013] Assessing source extent using major
[Wed Jul 31 20:57:26 2013] Source does appear to be extended
[Wed Jul 31 20:57:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 31 21:45:00 2013] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Wed Jul 31 21:45:00 2013] Initial guess for spatial extent in simple fitting = 13.88"
[Wed Jul 31 21:45:00 2013] source mask rpix=3.2, npix_max = 54, mask sum = 43, frac = 0.789
[Wed Jul 31 21:45:00 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 13.88"
[Wed Jul 31 22:05:03 2013] fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_src20.ximg exists
[Wed Jul 31 22:05:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_src20.csv
[Wed Jul 31 22:05:03 2013] fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Jul 31 22:05:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_src20.csv
[Wed Jul 31 22:05:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 22:05:04 2013] fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Jul 31 22:05:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jul 31 22:05:04 2013] fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Jul 31 22:05:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jul 31 22:05:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693160101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 22:05:15 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 15.527320 pixels away
[Wed Jul 31 22:05:15 2013] Vigneting correction estimate = 1.000000
[Wed Jul 31 22:05:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 31 22:05:15 2013] Assessing source extent using major
[Wed Jul 31 22:05:15 2013] Source does appear to be extended
[Wed Jul 31 22:05:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 31 23:45:48 2013] XMMSAS src. selection expression = ellipse(20196.783386, 42865.487244, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 31 23:45:48 2013] Writing source region out to fullrun_mos1_xmm0693160101_pi300-10000_pass1_cl_src24_src.reg
[Wed Jul 31 23:45:48 2013] Extracting stamp from image fullrun_mos1_xmm0693160101_pi300-10000_cl_sm2.00.img.gz, (195, 456) - (270, 531)
[Wed Jul 31 23:45:48 2013] XMMSAS bgd. selection expression = annulus(20196.783386, 42865.487244, 1087.500000, 2175.000000, X, Y)
[Wed Jul 31 23:45:48 2013] Writing fullrun_mos1_xmm0693160101_pi300-10000_pass1_cl_src24.gif
[Wed Jul 31 23:49:19 2013] Mean detx,y = (-3034.95, 16312.82) 
[Wed Jul 31 23:49:20 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 31 23:49:29 2013] Binned source spectrum to 10 counts/bin
[Wed Jul 31 23:49:29 2013] Setting source spectrum file to fullrun_mos1_xmm0693160101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Jul 31 23:49:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693160101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Aug  1 00:08:42 2013] Not generating rmf since there are only 96 counts
[Thu Aug  1 00:08:42 2013] rmf not generated due to insufficient counts
[Thu Aug  1 00:10:38 2013] Updating aperture counts using extracted products
[Thu Aug  1 00:10:38 2013] Total counts from fullrun_mos1_xmm0693160101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 319.00
[Thu Aug  1 00:10:38 2013] Total counts from fullrun_mos1_xmm0693160101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1559.00
[Thu Aug  1 00:10:38 2013] Got source and background scale factors 853596.000000, 5642850.000000
[Thu Aug  1 00:10:38 2013] User source parameters:
  Position = (232.7, 493.3) = 4 4 10.90 -43 7 3.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 83.2 +/- 18.9
  Background aperture counts = 235.8
  Rate = 0.001 +/- 0.0003

[Thu Aug  1 00:10:38 2013] Updating counts from extracted products
[Thu Aug  1 00:10:38 2013] Set source signif. to 83.17/15.36 = 5.42
[Thu Aug  1 00:10:39 2013] Calculating source flux in energy range 0.30-8.00
[Thu Aug  1 00:10:39 2013] Using photon index=1.80, rate=0.00121, arf fullrun_mos1_xmm0693160101_pi300-10000_pass1_cl_src24.arf
[Thu Aug  1 00:10:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  1 00:10:39 2013] Updating source flux to 3.8e-14
[Thu Aug  1 00:10:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug  1 00:10:44 2013] xmm0693160101/analysis//spectral/fullrun_mos1_xmm0693160101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete