[Tue Jul 16 20:00:02 2013] Detection parameters:
  Position = (277.2, 311.0) = 22 11 46.24 -3 47 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.6 +/- 18.2
  Background counts = 45.6
  Rate = 0.005 +/- 0.0006

[Tue Jul 16 20:00:03 2013] Off-axis axis estimate = 1.79'
[Tue Jul 16 21:13:07 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 21:13:07 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Jul 16 21:13:07 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Tue Jul 16 21:13:07 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.32"
[Tue Jul 16 21:59:38 2013] fullrun_mos2_xmm0693010601_pi300-10000_cl_pass0_src8.ximg exists
[Tue Jul 16 21:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010601_pi300-10000_cl_pass0_src8.csv
[Tue Jul 16 21:59:38 2013] fullrun_mos2_xmm0693010601_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Jul 16 21:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010601_pi300-10000_cl_pass0_src8.csv
[Tue Jul 16 21:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 21:59:38 2013] fullrun_mos2_xmm0693010601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Jul 16 21:59:38 2013] fullrun_mos2_xmm0693010601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Jul 16 21:59:38 2013] Fit fullrun_mos2_xmm0693010601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Jul 16 21:59:55 2013] Source 19 is offset by 0.695559 and 5.719420 pixels which is larger than
2 X fitted extent = 2.929848 x 2.929848, not incorporating fit results
[Tue Jul 16 21:59:55 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 21:59:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 21:59:55 2013] Assessing source extent using major
[Tue Jul 16 21:59:55 2013] Source does appear to be extended
[Tue Jul 16 21:59:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 22:54:45 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 22:54:45 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Jul 16 22:54:45 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Tue Jul 16 22:54:45 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.32"
[Tue Jul 16 23:33:02 2013] fullrun_mos2_xmm0693010601_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jul 16 23:33:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010601_pi300-10000_cl_pass1_src8.csv
[Tue Jul 16 23:33:02 2013] fullrun_mos2_xmm0693010601_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jul 16 23:33:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010601_pi300-10000_cl_pass1_src8.csv
[Tue Jul 16 23:33:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 23:33:02 2013] fullrun_mos2_xmm0693010601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jul 16 23:33:02 2013] fullrun_mos2_xmm0693010601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jul 16 23:33:02 2013] Fit fullrun_mos2_xmm0693010601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jul 16 23:33:16 2013] Source 19 is offset by 0.645702 and 5.719420 pixels which is larger than
2 X fitted extent = 3.006667 x 3.006667, not incorporating fit results
[Tue Jul 16 23:33:16 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 23:33:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 23:33:16 2013] Assessing source extent using major
[Tue Jul 16 23:33:16 2013] Source does appear to be extended
[Tue Jul 16 23:33:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 17 00:34:57 2013] XMMSAS src. selection expression = ellipse(24071.838470, 27007.379578, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 17 00:34:57 2013] Writing source region out to fullrun_mos2_xmm0693010601_pi300-10000_pass1_cl_src19_src.reg
[Wed Jul 17 00:34:57 2013] Extracting stamp from image fullrun_mos2_xmm0693010601_pi300-10000_cl_sm2.00.img.gz, (240, 273) - (315, 348)
[Wed Jul 17 00:34:57 2013] XMMSAS bgd. selection expression = annulus(24071.838470, 27007.379578, 1087.500000, 2175.000000, X, Y) && !ellipse(24237.531800, 24815.619200, 4738.896136, 3939.600113, 76.971600, X, Y) && !ellipse(23550.868622, 25541.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23030.766400, 28617.118400, 360.820810, 360.820810, 0.000000, X, Y) && !ellipse(25882.207367, 25078.407867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.535675, 26477.048096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22516.607269, 24335.830688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26953.618200, 25183.234600, 1112.144032, 582.623217, 12.539200, X, Y) && !ellipse(23291.992645, 27598.266968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23649.858734, 27618.076141, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 17 00:34:57 2013] Writing fullrun_mos2_xmm0693010601_pi300-10000_pass1_cl_src19.gif
[Wed Jul 17 00:38:40 2013] Mean detx,y = (-952.62, -1793.79) 
[Wed Jul 17 00:38:40 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 17 00:38:47 2013] Binned source spectrum to 10 counts/bin
[Wed Jul 17 00:38:47 2013] Setting source spectrum file to fullrun_mos2_xmm0693010601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jul 17 00:38:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693010601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Jul 17 00:51:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 17 00:51:50 2013] rmf not generated due to insufficient counts
[Wed Jul 17 00:53:35 2013] Updating aperture counts using extracted products
[Wed Jul 17 00:53:35 2013] Total counts from fullrun_mos2_xmm0693010601_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 689.00
[Wed Jul 17 00:53:35 2013] Total counts from fullrun_mos2_xmm0693010601_pi300-10000_pass1_cl_src19_bgd.pi.gz = 0.00
[Wed Jul 17 00:53:35 2013] Got source and background scale factors 1186740.000000, 0.000000
[Wed Jul 17 00:53:35 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed Jul 17 00:53:37 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jul 17 00:53:37 2013] Using photon index=1.80, rate=0.00453, arf fullrun_mos2_xmm0693010601_pi300-10000_pass1_cl_src19.arf
[Wed Jul 17 00:53:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 17 00:53:37 2013] Updating source flux to 4.5e-14
[Wed Jul 17 00:53:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jul 17 00:53:43 2013] xmm0693010601/analysis//spectral/fullrun_mos2_xmm0693010601_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete