[Thu Jul 11 17:13:40 2013] Detection parameters:
  Position = (303.0, 267.1) = 1 5 28.77 -24 42 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.9 +/- 18.8
  Background counts = 102.6
  Rate = 0.006 +/- 0.001

[Thu Jul 11 17:13:40 2013] Off-axis axis estimate = 2.30'
[Thu Jul 11 17:15:43 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 17:15:43 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Thu Jul 11 17:15:43 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Thu Jul 11 17:15:43 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 7.58"
[Thu Jul 11 18:19:58 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_src51.ximg exists
[Thu Jul 11 18:19:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_src51.csv
[Thu Jul 11 18:19:58 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu Jul 11 18:19:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_src51.csv
[Thu Jul 11 18:19:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 18:19:59 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu Jul 11 18:19:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src51.csv
[Thu Jul 11 18:19:59 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu Jul 11 18:19:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src51.csv
[Thu Jul 11 18:19:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:40 2013] Source 52 is offset by -6.725556 and 4.557407 pixels which is larger than
2 X fitted extent = 1.003030 x 6.641563, not incorporating fit results
[Thu Jul 11 21:30:40 2013] Vigneting correction estimate = 1.000000
[Thu Jul 11 21:30:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 11 21:30:40 2013] Assessing source extent using major
[Thu Jul 11 21:30:40 2013] Source does appear to be extended
[Thu Jul 11 21:30:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 11 21:30:40 2013] Source is confused with source 39
[Thu Jul 11 21:31:08 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 21:31:08 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Thu Jul 11 21:31:08 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Thu Jul 11 21:31:08 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 7.58"
[Thu Jul 11 22:26:33 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src43.ximg exists
[Thu Jul 11 22:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src43.csv
[Thu Jul 11 22:26:33 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src43_1.ximg exists
[Thu Jul 11 22:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src43.csv
[Thu Jul 11 22:26:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 22:26:33 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Thu Jul 11 22:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src43.csv
[Thu Jul 11 22:26:33 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Thu Jul 11 22:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src43.csv
[Thu Jul 11 22:26:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:51:45 2013] Source 52 is offset by -6.776475 and 4.662902 pixels which is larger than
2 X fitted extent = 1.125853 x 6.957334, not incorporating fit results
[Fri Jul 12 00:51:45 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 00:51:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 00:51:45 2013] Assessing source extent using major
[Fri Jul 12 00:51:45 2013] Source does appear to be extended
[Fri Jul 12 00:51:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 00:52:05 2013] XMMSAS src. selection expression = ellipse(26308.392670, 23185.114441, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 12 00:52:05 2013] Writing source region out to fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src52_src.reg
[Fri Jul 12 00:52:05 2013] Extracting stamp from image fullrun_pn_xmm0693010501_pi300-10000_cl_sm2.00.img.gz, (265, 230) - (340, 305)
[Fri Jul 12 00:52:05 2013] XMMSAS bgd. selection expression = annulus(26308.392670, 23185.114441, 1087.500000, 2175.000000, X, Y) && !ellipse(24336.189800, 24764.947880, 1156.600033, 1156.600033, 0.000000, X, Y) && !ellipse(23638.983734, 23965.576233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24139.348000, 26269.978000, 1129.040032, 1129.040032, 0.000000, X, Y) && !ellipse(24482.539642, 25610.045624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26368.622009, 24124.028381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25492.636000, 24045.958000, 1148.648033, 1148.648033, 0.000000, X, Y) && !ellipse(24105.408661, 23524.201508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27160.603973, 21727.470169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26152.186676, 23587.739014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27976.120117, 20339.801849, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 12 00:52:05 2013] Writing fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src52.gif
[Fri Jul 12 01:08:30 2013] Mean detx,y = (-2811.46, -531.08) 
[Fri Jul 12 01:08:32 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 12 01:08:45 2013] Binned source spectrum to 10 counts/bin
[Fri Jul 12 01:08:45 2013] Setting source spectrum file to fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Fri Jul 12 01:08:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Fri Jul 12 01:52:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 12 01:52:01 2013] rmf not generated due to insufficient counts
[Fri Jul 12 03:25:33 2013] Updating aperture counts using extracted products
[Fri Jul 12 03:25:33 2013] Total counts from fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 767.00
[Fri Jul 12 03:25:33 2013] Total counts from fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src52_bgd.pi.gz = 2150.00
[Fri Jul 12 03:25:33 2013] Got source and background scale factors 995748.000000, 4445205.000000
[Fri Jul 12 03:25:33 2013] User source parameters:
  Position = (303.0, 267.1) = 1 5 28.77 -24 42 24.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 285.4 +/- 28.7
  Background aperture counts = 481.6
  Rate = 0.01 +/- 0.001

[Fri Jul 12 03:25:33 2013] Updating counts from extracted products
[Fri Jul 12 03:25:33 2013] Set source signif. to 285.39/21.95 = 13.00
[Fri Jul 12 03:25:34 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 03:25:34 2013] Using photon index=1.80, rate=0.0114, arf fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src52.arf
[Fri Jul 12 03:25:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 12 03:25:34 2013] Updating source flux to 3.7e-14
[Fri Jul 12 03:25:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 12 03:25:55 2013] xmm0693010501/analysis//spectral/fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete