[Thu Jul 11 17:13:39 2013] Detection parameters:
  Position = (288.9, 280.1) = 1 5 33.25 -24 41 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 544.3 +/- 35.0
  Background counts = 130.8
  Rate = 0.03 +/- 0.002

[Thu Jul 11 17:13:40 2013] Off-axis axis estimate = 1.50'
[Thu Jul 11 17:15:43 2013] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 17:15:43 2013] Initial guess for spatial extent in simple fitting = 7.18"
[Thu Jul 11 17:15:43 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Thu Jul 11 17:15:43 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 7.18"
[Thu Jul 11 18:19:58 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_src19.ximg exists
[Thu Jul 11 18:19:58 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Jul 11 18:19:58 2013] Fit fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_src19 appears to have run properly
[Thu Jul 11 18:19:59 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Jul 11 18:19:59 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Jul 11 18:19:59 2013] Fit fullrun_pn_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Jul 11 21:30:40 2013] Spatial fit model total counts = 4324.220000, observed total counts = 4085.000000
[Thu Jul 11 21:30:40 2013] Offset between fit and detection position for source 20 = 5.603590 pixels
[Thu Jul 11 21:30:40 2013] 4331.623000 total counts/ 3950.810000 bgd. counts: snr = 6.058550
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 5.603590 pixels
  Position = (293.6, 276.9) = 1 5 31.76 -24 41 40.3
  Extent = 14.4 (14.3-28.7)", rotation angle = 0
  Source counts = 380.8 +/- 65.8
  Background counts = 3950.8
  Rate = 0.02 +/- 0.003
[Thu Jul 11 21:30:40 2013] Spatial fit model total counts = 12352.000000, observed total counts = 1444.000000
[Thu Jul 11 21:30:40 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 11 21:30:40 2013] Vigneting correction estimate = 1.000000
[Thu Jul 11 21:30:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 11 21:30:40 2013] Assessing source extent using major axis lower bound
[Thu Jul 11 21:30:40 2013] Source does appear to be extended
[Thu Jul 11 21:30:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 11 21:30:40 2013] Source is confused with source 39
[Thu Jul 11 21:31:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 11 21:31:08 2013] Initial guess for spatial extent in simple fitting = 14.36"
[Thu Jul 11 21:31:08 2013] source mask rpix=3.3, npix_max = 57, mask sum = 54, frac = 0.935
[Thu Jul 11 21:31:08 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 14.36"
[Thu Jul 11 22:26:33 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src19.ximg exists
[Thu Jul 11 22:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src19.csv
[Thu Jul 11 22:26:33 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Jul 11 22:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src19.csv
[Thu Jul 11 22:26:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 22:26:33 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Jul 11 22:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu Jul 11 22:26:33 2013] fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jul 11 22:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu Jul 11 22:26:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:51:45 2013] Warning, spatial fit 19 centroid is now closest to src. 17
[Fri Jul 12 00:51:45 2013] Spatial fit model total counts = 2169.090000, observed total counts = 1444.000000
[Fri Jul 12 00:51:45 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 12 00:51:45 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 00:51:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 00:51:45 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 00:51:45 2013] Source does appear to be extended
[Fri Jul 12 00:51:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 00:52:04 2013] XMMSAS src. selection expression = ellipse(25492.636000, 24045.958000, 861.486025, 861.486025, 0.000000, X, Y)
[Fri Jul 12 00:52:04 2013] Writing source region out to fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src20_src.reg
[Fri Jul 12 00:52:04 2013] Extracting stamp from image fullrun_pn_xmm0693010501_pi300-10000_cl_sm2.00.img.gz, (244, 227) - (343, 326)
[Fri Jul 12 00:52:04 2013] XMMSAS bgd. selection expression = annulus(25492.636000, 24045.958000, 1435.810041, 2871.620083, X, Y) && !ellipse(25256.295880, 27592.471000, 958.448028, 617.290418, 76.467200, X, Y) && !ellipse(24336.189800, 24764.947880, 1156.600033, 1156.600033, 0.000000, X, Y) && !ellipse(23638.983734, 23965.576233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26450.936000, 26628.334000, 1108.336032, 1108.336032, 0.000000, X, Y) && !ellipse(24662.765686, 26753.322479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25262.982849, 26570.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24139.348000, 26269.978000, 1129.040032, 1129.040032, 0.000000, X, Y) && !ellipse(24482.539642, 25610.045624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26368.622009, 24124.028381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22818.906250, 23186.083527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22815.122600, 22263.452800, 432.348812, 305.463209, 349.701300, X, Y) && !ellipse(24105.408661, 23524.201508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27160.603973, 21727.470169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26152.186676, 23587.739014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27976.120117, 20339.801849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26992.545929, 27700.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26308.392670, 23185.114441, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 12 00:52:04 2013] Writing fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src20.gif
[Fri Jul 12 01:00:25 2013] Mean detx,y = (-1488.90, -266.95) 
[Fri Jul 12 01:00:27 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 12 01:00:46 2013] Binned source spectrum to 10 counts/bin
[Fri Jul 12 01:00:46 2013] Setting source spectrum file to fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Jul 12 01:00:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Jul 12 03:25:30 2013] Updating aperture counts using extracted products
[Fri Jul 12 03:25:30 2013] Total counts from fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 3089.00
[Fri Jul 12 03:25:30 2013] Total counts from fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src20_bgd.pi.gz = 3272.00
[Fri Jul 12 03:25:30 2013] Got source and background scale factors 1794259.000000, 6414199.000000
[Fri Jul 12 03:25:30 2013] User source parameters:
  Position = (293.6, 276.9) = 1 5 31.76 -24 41 40.3
  Extent = 14.4 (14.3-28.7)", rotation angle = 0
  Source aperture counts = 2173.7 +/- 56.6
  Background aperture counts = 915.3
  Rate = 0.09 +/- 0.002

[Fri Jul 12 03:25:33 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 03:25:33 2013] Using photon index=1.80, rate=0.0152, arf fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src20.arf
[Fri Jul 12 03:25:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 12 03:25:33 2013] Updating source flux to 4.7e-14
[Fri Jul 12 03:25:49 2013] Flag p found in src. 20 procflags, skipping spectral fitting
[Fri Jul 12 03:25:49 2013] Flag c found in src. 20 procflags, skipping spectral fitting
[Fri Jul 12 03:25:55 2013] xmm0693010501/analysis//spectral/fullrun_pn_xmm0693010501_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete