[Thu Jul 11 17:14:21 2013] Detection parameters:
  Position = (270.4, 273.4) = 1 5 39.15 -24 41 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.3 +/- 12.9
  Background counts = 36.9
  Rate = 0.002 +/- 0.0004

[Thu Jul 11 17:14:22 2013] Off-axis axis estimate = 2.72'
[Thu Jul 11 19:52:28 2013] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 19:52:28 2013] Initial guess for spatial extent in simple fitting = 7.79"
[Thu Jul 11 19:52:28 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.191
[Thu Jul 11 19:52:28 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 7.79"
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src46.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src46.csv
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src46_1.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src46.csv
[Thu Jul 11 21:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:31 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Thu Jul 11 21:30:31 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu Jul 11 21:30:31 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Thu Jul 11 21:30:31 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu Jul 11 21:30:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:57 2013] Source 50 is offset by -3.659562 and 5.282973 pixels which is larger than
2 X fitted extent = 6.907127 x 0.863393, not incorporating fit results
[Thu Jul 11 21:30:57 2013] Spatial fit model total counts = -75.241500, observed total counts = 720.000000
[Thu Jul 11 21:30:57 2013] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 11 21:30:57 2013] Vigneting correction estimate = 1.000000
[Thu Jul 11 21:30:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 11 21:30:57 2013] Assessing source extent using major
[Thu Jul 11 21:30:57 2013] Source does appear to be extended
[Thu Jul 11 21:30:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 11 21:30:57 2013] Source is confused with source 29
[Thu Jul 11 23:43:14 2013] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 23:43:14 2013] Initial guess for spatial extent in simple fitting = 7.79"
[Thu Jul 11 23:43:14 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.191
[Thu Jul 11 23:43:14 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.79"
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src35.ximg exists
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Jul 12 00:51:38 2013] Fit fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src35 appears to have run properly
[Fri Jul 12 00:51:39 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Jul 12 00:51:39 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Jul 12 00:51:39 2013] Fit fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Fri Jul 12 00:51:54 2013] Source 50 is offset by -3.659562 and 5.282973 pixels which is larger than
2 X fitted extent = 6.907127 x 0.863393, not incorporating fit results
[Fri Jul 12 00:51:54 2013] Warning, spatial fit 35 centroid is now closest to src. 21
[Fri Jul 12 00:51:54 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 00:51:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 00:51:54 2013] Assessing source extent using major
[Fri Jul 12 00:51:54 2013] Source does appear to be extended
[Fri Jul 12 00:51:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 02:41:43 2013] XMMSAS src. selection expression = ellipse(23479.196106, 23735.196686, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 12 02:41:43 2013] Writing source region out to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src50_src.reg
[Fri Jul 12 02:41:43 2013] Extracting stamp from image fullrun_mos2_xmm0693010501_pi300-10000_cl_sm2.00.img.gz, (233, 236) - (308, 311)
[Fri Jul 12 02:41:43 2013] XMMSAS bgd. selection expression = annulus(23479.196106, 23735.196686, 1087.500000, 2175.000000, X, Y) && !ellipse(24315.981900, 24725.918000, 1977.224057, 904.976026, 0.000000, X, Y) && !ellipse(24763.590424, 24822.407288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25056.614000, 24514.614000, 1134.440033, 1134.440033, 0.000000, X, Y) && !ellipse(24324.002800, 25059.818000, 1135.848033, 1135.848033, 0.000000, X, Y) && !ellipse(25196.904480, 26665.807404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24457.670000, 25881.372000, 1111.600032, 1111.600032, 0.000000, X, Y) && !ellipse(22818.232000, 23200.460000, 340.869610, 340.869610, 0.000000, X, Y) && !ellipse(24735.319672, 26313.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24415.067383, 23793.264832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23129.411926, 24585.785767, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25957.628784, 23863.604523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.174957, 26181.230042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.907104, 23352.529968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26313.089417, 25074.101410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26160.117249, 24559.976227, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 12 02:41:43 2013] Writing fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src50.gif
[Fri Jul 12 02:47:09 2013] Mean detx,y = (290.56, 1420.95) 
[Fri Jul 12 02:47:10 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 12 02:47:15 2013] Binned source spectrum to 10 counts/bin
[Fri Jul 12 02:47:15 2013] Setting source spectrum file to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jul 12 02:47:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri Jul 12 03:24:55 2013] Not generating rmf since there are only 55 counts
[Fri Jul 12 03:24:55 2013] rmf not generated due to insufficient counts
[Fri Jul 12 03:25:40 2013] Updating aperture counts using extracted products
[Fri Jul 12 03:25:40 2013] Total counts from fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 449.00
[Fri Jul 12 03:25:40 2013] Total counts from fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src50_bgd.pi.gz = 604.00
[Fri Jul 12 03:25:40 2013] Got source and background scale factors 1337600.000000, 3890652.000000
[Fri Jul 12 03:25:40 2013] User source parameters:
  Position = (270.4, 273.4) = 1 5 39.15 -24 41 51.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 241.3 +/- 22.2
  Background aperture counts = 207.7
  Rate = 0.008 +/- 0.0007

[Fri Jul 12 03:25:40 2013] Updating counts from extracted products
[Fri Jul 12 03:25:40 2013] Set source signif. to 241.35/14.41 = 16.75
[Fri Jul 12 03:25:40 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 03:25:40 2013] Using photon index=1.80, rate=0.00782, arf fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src50.arf
[Fri Jul 12 03:25:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 12 03:25:40 2013] Updating source flux to 7.7e-14
[Fri Jul 12 03:25:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 12 03:25:49 2013] xmm0693010501/analysis//spectral/fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete