[Thu Jul 11 17:14:21 2013] Detection parameters:
  Position = (273.2, 306.0) = 1 5 38.26 -24 39 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.9 +/- 16.0
  Background counts = 47.6
  Rate = 0.003 +/- 0.0005

[Thu Jul 11 17:14:22 2013] Off-axis axis estimate = 1.91'
[Thu Jul 11 19:52:28 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 19:52:28 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Thu Jul 11 19:52:28 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Thu Jul 11 19:52:28 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 7.38"
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src26.csv
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src26.csv
[Thu Jul 11 21:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jul 11 21:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:57 2013] Spatial fit model total counts = 2155.870000, observed total counts = 2030.000000
[Thu Jul 11 21:30:57 2013] Offset between fit and detection position for source 42 = 5.583398 pixels
[Thu Jul 11 21:30:57 2013] Warning, changing simple spatial fit ID from 26 to 5
[Thu Jul 11 21:30:57 2013] 2261.776800 total counts/ 2183.660000 bgd. counts: snr = 1.671675
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 5.583398 pixels
  Position = (271.2, 311.2) = 1 5 38.91 -24 39 11.2
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 78.1 +/- 47.6
  Background counts = 2183.7
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability