[Thu Jul 11 17:14:21 2013] Detection parameters:
  Position = (303.8, 340.0) = 1 5 28.51 -24 37 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.3 +/- 9.6
  Background counts = 28.9
  Rate = 0.001 +/- 0.0004

[Thu Jul 11 17:14:22 2013] Off-axis axis estimate = 3.04'
[Thu Jul 11 19:52:28 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 19:52:28 2013] Initial guess for spatial extent in simple fitting = 7.95"
[Thu Jul 11 19:52:28 2013] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.600
[Thu Jul 11 19:52:28 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 7.95"
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src53.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src53.csv
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src53_1.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src53.csv
[Thu Jul 11 21:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:31 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Thu Jul 11 21:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu Jul 11 21:30:31 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Thu Jul 11 21:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu Jul 11 21:30:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:57 2013] Source 40 is offset by -6.567880 and -5.906536 pixels which is larger than
2 X fitted extent = 0.913393 x 1.285490, not incorporating fit results
[Thu Jul 11 21:30:57 2013] Vigneting correction estimate = 1.000000
[Thu Jul 11 21:30:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 11 21:30:57 2013] Assessing source extent using major
[Thu Jul 11 21:30:57 2013] Source does appear to be extended
[Thu Jul 11 21:30:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 11 21:30:57 2013] Deleting source due to low Poisson probability 0.9