[Thu Jul 11 17:14:20 2013] Detection parameters:
  Position = (287.0, 325.2) = 1 5 33.86 -24 38 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 578.2 +/- 31.3
  Background counts = 42.4
  Rate = 0.02 +/- 0.001

[Thu Jul 11 17:14:22 2013] Off-axis axis estimate = 2.11'
[Thu Jul 11 19:52:28 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 19:52:28 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Jul 11 19:52:28 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Thu Jul 11 19:52:28 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.48"
[Thu Jul 11 21:30:29 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul 11 21:30:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src2.csv
[Thu Jul 11 21:30:29 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src2.csv
[Thu Jul 11 21:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 11 21:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:57 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Thu Jul 11 21:30:57 2013] Vigneting correction estimate = 1.000000
[Thu Jul 11 21:30:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 11 21:30:57 2013] Assessing source extent using major
[Thu Jul 11 21:30:57 2013] Source does appear to be extended
[Thu Jul 11 21:30:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 11 21:30:57 2013] Source is confused with source 7
[Thu Jul 11 23:43:14 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 23:43:14 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Jul 11 23:43:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Thu Jul 11 23:43:14 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.48"
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src2.csv
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src2.csv
[Fri Jul 12 00:51:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 12 00:51:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:51:54 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Fri Jul 12 00:51:54 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 00:51:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 00:51:54 2013] Assessing source extent using major
[Fri Jul 12 00:51:54 2013] Source does appear to be extended
[Fri Jul 12 00:51:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 02:41:42 2013] XMMSAS src. selection expression = ellipse(24919.528259, 28242.177948, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 12 02:41:42 2013] Writing source region out to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 12 02:41:42 2013] Extracting stamp from image fullrun_mos2_xmm0693010501_pi300-10000_cl_sm2.00.img.gz, (249, 288) - (324, 363)
[Fri Jul 12 02:41:42 2013] XMMSAS bgd. selection expression = annulus(24919.528259, 28242.177948, 1087.500000, 2175.000000, X, Y) && !ellipse(25368.885600, 27296.416000, 1097.832032, 1097.832032, 0.000000, X, Y) && !ellipse(24345.540000, 28909.586000, 1288.984037, 1288.984037, 0.000000, X, Y) && !ellipse(24315.981900, 24725.918000, 1977.224057, 904.976026, 0.000000, X, Y) && !ellipse(24287.065000, 28015.950000, 1187.184034, 1187.184034, 0.000000, X, Y) && !ellipse(24324.002800, 25059.818000, 1135.848033, 1135.848033, 0.000000, X, Y) && !ellipse(24000.878000, 29400.516000, 1325.752038, 372.476811, 356.608140, X, Y) && !ellipse(25196.904480, 26665.807404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24457.670000, 25881.372000, 1111.600032, 1111.600032, 0.000000, X, Y) && !ellipse(24735.319672, 26313.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26478.694214, 28116.069366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23129.411926, 24585.785767, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23698.174957, 26181.230042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26399.452209, 26934.822937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.794342, 29828.743805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25427.544220, 30394.912872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24034.670715, 29956.933929, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 12 02:41:42 2013] Writing fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src2.gif
[Fri Jul 12 02:41:54 2013] Mean detx,y = (-887.93, -3037.62) 
[Fri Jul 12 02:41:54 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 12 02:42:00 2013] Binned source spectrum to 10 counts/bin
[Fri Jul 12 02:42:00 2013] Setting source spectrum file to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 12 02:42:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 12 02:50:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 12 02:50:59 2013] rmf not generated due to insufficient counts
[Fri Jul 12 03:25:37 2013] Updating aperture counts using extracted products
[Fri Jul 12 03:25:37 2013] Total counts from fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2136.00
[Fri Jul 12 03:25:37 2013] Total counts from fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 384.00
[Fri Jul 12 03:25:37 2013] Got source and background scale factors 1198128.000000, 933420.000000
[Fri Jul 12 03:25:37 2013] User source parameters:
  Position = (287.0, 325.2) = 1 5 33.86 -24 38 10.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1643.1 +/- 47.2
  Background aperture counts = 492.9
  Rate = 0.05 +/- 0.002

[Fri Jul 12 03:25:37 2013] Updating counts from extracted products
[Fri Jul 12 03:25:37 2013] Set source signif. to 1643.10/22.20 = 74.01
[Fri Jul 12 03:25:40 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 03:25:40 2013] Using photon index=1.80, rate=0.0532, arf fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src2.arf
[Fri Jul 12 03:25:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 12 03:25:40 2013] Updating source flux to 5.3e-13
[Fri Jul 12 03:25:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 12 03:25:49 2013] xmm0693010501/analysis//spectral/fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete