[Thu Jul 11 17:14:21 2013] Detection parameters:
  Position = (281.7, 298.9) = 1 5 35.54 -24 40 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.5 +/- 21.2
  Background counts = 47.8
  Rate = 0.006 +/- 0.0007

[Thu Jul 11 17:14:22 2013] Off-axis axis estimate = 1.21'
[Thu Jul 11 19:52:28 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 19:52:28 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Thu Jul 11 19:52:28 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Thu Jul 11 19:52:28 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.03"
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src12.csv
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src12.csv
[Thu Jul 11 21:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jul 11 21:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jul 11 21:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:57 2013] Spatial fit model total counts = 1620.390000, observed total counts = 1447.000000
[Thu Jul 11 21:30:57 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 11 21:30:57 2013] Spatial fit model total counts = 1653.620000, observed total counts = 1512.000000
[Thu Jul 11 21:30:57 2013] Offset between fit and detection position for source 16 = 0.742391 pixels
[Thu Jul 11 21:30:57 2013] Warning, changing simple spatial fit ID from 12 to 18
[Thu Jul 11 21:30:57 2013] 1622.138000 total counts/ 1485.550000 bgd. counts: snr = 3.543798
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.742391 pixels
  Position = (281.7, 298.2) = 1 5 35.56 -24 40 7.9
  Extent = 13.9 (3.4-27.8)", rotation angle = 0
  Source counts = 136.6 +/- 40.3
  Background counts = 1485.5
  Rate = 0.004 +/- 0.001
[Thu Jul 11 21:30:57 2013] Vigneting correction estimate = 1.000000
[Thu Jul 11 21:30:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 11 21:30:57 2013] Assessing source extent using major axis lower bound
[Thu Jul 11 21:30:57 2013] Source does appear to be extended
[Thu Jul 11 21:30:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 11 21:30:57 2013] Source is confused with source 8
[Thu Jul 11 21:30:57 2013] Source is confused with source 15
[Thu Jul 11 21:30:57 2013] Source is confused with source 44
[Thu Jul 11 23:43:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 11 23:43:14 2013] Initial guess for spatial extent in simple fitting = 13.89"
[Thu Jul 11 23:43:14 2013] source mask rpix=3.2, npix_max = 54, mask sum = 55, frac = 1.008
[Thu Jul 11 23:43:14 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 13.89"
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src12.csv
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src12.csv
[Fri Jul 12 00:51:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jul 12 00:51:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:51:54 2013] Warning, spatial fit 12 centroid is now closest to src. 44
[Fri Jul 12 00:51:54 2013] Spatial fit model total counts = 1638.870000, observed total counts = 1512.000000
[Fri Jul 12 00:51:54 2013] Offset between fit and detection position for source 16 = 0.140546 pixels
[Fri Jul 12 00:51:54 2013] Warning, changing simple spatial fit ID from 12 to 18
[Fri Jul 12 00:51:54 2013] 1637.961000 total counts/ 1517.320000 bgd. counts: snr = 3.097108
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.140546 pixels
  Position = (281.7, 298.0) = 1 5 35.56 -24 40 8.5
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 120.6 +/- 40.5
  Background counts = 1517.3
  Rate = 0.004 +/- 0.001
[Fri Jul 12 00:51:54 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 00:51:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 00:51:54 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 00:51:54 2013] Source does appear to be extended
[Fri Jul 12 00:51:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 02:41:42 2013] XMMSAS src. selection expression = ellipse(24457.670000, 25881.372000, 833.700024, 833.700024, 0.000000, X, Y)
[Fri Jul 12 02:41:42 2013] Writing source region out to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src16_src.reg
[Fri Jul 12 02:41:42 2013] Extracting stamp from image fullrun_mos2_xmm0693010501_pi300-10000_cl_sm2.00.img.gz, (234, 250) - (330, 346)
[Fri Jul 12 02:41:42 2013] XMMSAS bgd. selection expression = annulus(24457.670000, 25881.372000, 1389.500040, 2779.000080, X, Y) && !ellipse(25368.885600, 27296.416000, 1097.832032, 1097.832032, 0.000000, X, Y) && !ellipse(24919.528259, 28242.177948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.540000, 28909.586000, 1288.984037, 1288.984037, 0.000000, X, Y) && !ellipse(24315.981900, 24725.918000, 1977.224057, 904.976026, 0.000000, X, Y) && !ellipse(24287.065000, 28015.950000, 1187.184034, 1187.184034, 0.000000, X, Y) && !ellipse(24763.590424, 24822.407288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25056.614000, 24514.614000, 1134.440033, 1134.440033, 0.000000, X, Y) && !ellipse(24324.002800, 25059.818000, 1135.848033, 1135.848033, 0.000000, X, Y) && !ellipse(24000.878000, 29400.516000, 1325.752038, 372.476811, 356.608140, X, Y) && !ellipse(25196.904480, 26665.807404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22818.232000, 23200.460000, 340.869610, 340.869610, 0.000000, X, Y) && !ellipse(24735.319672, 26313.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26478.694214, 28116.069366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24415.067383, 23793.264832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23129.411926, 24585.785767, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25957.628784, 23863.604523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.174957, 26181.230042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.907104, 23352.529968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26399.452209, 26934.822937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26313.089417, 25074.101410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23479.196106, 23735.196686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26160.117249, 24559.976227, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 12 02:41:42 2013] Writing fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src16.gif
[Fri Jul 12 02:43:35 2013] Mean detx,y = (46.16, -784.21) 
[Fri Jul 12 02:43:35 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 12 02:43:41 2013] Binned source spectrum to 10 counts/bin
[Fri Jul 12 02:43:41 2013] Setting source spectrum file to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jul 12 02:43:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jul 12 03:25:38 2013] Updating aperture counts using extracted products
[Fri Jul 12 03:25:38 2013] Total counts from fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 1744.00
[Fri Jul 12 03:25:38 2013] Total counts from fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src16_bgd.pi.gz = 799.00
[Fri Jul 12 03:25:38 2013] Got source and background scale factors 2001264.000000, 2774400.000000
[Fri Jul 12 03:25:38 2013] User source parameters:
  Position = (281.7, 298.0) = 1 5 35.56 -24 40 8.5
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source aperture counts = 1167.7 +/- 42.8
  Background aperture counts = 576.3
  Rate = 0.04 +/- 0.001

[Fri Jul 12 03:25:40 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 03:25:40 2013] Using photon index=1.80, rate=0.00391, arf fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src16.arf
[Fri Jul 12 03:25:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 12 03:25:40 2013] Updating source flux to 4.1e-14
[Fri Jul 12 03:25:45 2013] Flag p found in src. 16 procflags, skipping spectral fitting
[Fri Jul 12 03:25:45 2013] Flag c found in src. 16 procflags, skipping spectral fitting
[Fri Jul 12 03:25:49 2013] xmm0693010501/analysis//spectral/fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete