[Thu Jul 11 17:14:20 2013] Detection parameters:
  Position = (300.7, 360.7) = 1 5 29.47 -24 35 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.2 +/- 13.4
  Background counts = 22.2
  Rate = 0.005 +/- 0.0006

[Thu Jul 11 17:14:22 2013] Off-axis axis estimate = 4.52'
[Thu Jul 11 19:52:28 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 19:52:28 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Thu Jul 11 19:52:28 2013] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.962
[Thu Jul 11 19:52:28 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.69"
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src17.ximg exists
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Jul 11 21:30:30 2013] Fit fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_src17 appears to have run properly
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Jul 11 21:30:30 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Jul 11 21:30:30 2013] Fit fullrun_mos2_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Jul 11 21:30:57 2013] Spatial fit model total counts = 379.546000, observed total counts = 347.000000
[Thu Jul 11 21:30:57 2013] Offset between fit and detection position for source 11 = 0.788520 pixels
[Thu Jul 11 21:30:57 2013] 353.181700 total counts/ 283.367000 bgd. counts: snr = 4.147365
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.788520 pixels
  Position = (300.6, 361.5) = 1 5 29.52 -24 35 32.4
  Extent = 3.4 (2.5-4.5)", rotation angle = 0
  Source counts = 69.8 +/- 18.8
  Background counts = 283.4
  Rate = 0.002 +/- 0.0006
[Thu Jul 11 21:30:57 2013] Vigneting correction estimate = 1.000000
[Thu Jul 11 21:30:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 11 21:30:57 2013] Assessing source extent using major axis lower bound
[Thu Jul 11 21:30:57 2013] Source does appear to be extended
[Thu Jul 11 21:30:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 11 23:43:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 11 23:43:14 2013] Initial guess for spatial extent in simple fitting = 3.40"
[Thu Jul 11 23:43:14 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.372
[Thu Jul 11 23:43:14 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 3.40"
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src17.csv
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src17.csv
[Fri Jul 12 00:51:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Jul 12 00:51:38 2013] fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jul 12 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Jul 12 00:51:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:51:54 2013] Spatial fit model total counts = 377.837000, observed total counts = 341.000000
[Fri Jul 12 00:51:54 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 12 00:51:54 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 00:51:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 00:51:54 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 00:51:54 2013] Source does appear to be extended
[Fri Jul 12 00:51:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 02:41:42 2013] XMMSAS src. selection expression = ellipse(26102.463400, 31402.887400, 203.750406, 203.750406, 0.000000, X, Y)
[Fri Jul 12 02:41:42 2013] Writing source region out to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src11_src.reg
[Fri Jul 12 02:41:42 2013] Extracting stamp from image fullrun_mos2_xmm0693010501_pi300-10000_cl_sm2.00.img.gz, (289, 350) - (312, 373)
[Fri Jul 12 02:41:42 2013] XMMSAS bgd. selection expression = annulus(26102.463400, 31402.887400, 339.584010, 679.168020, X, Y) && !ellipse(25427.544220, 30394.912872, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 12 02:41:42 2013] Writing fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src11.gif
[Fri Jul 12 02:44:27 2013] Mean detx,y = (-1580.71, -6367.13) 
[Fri Jul 12 02:44:27 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 12 02:44:33 2013] Binned source spectrum to 10 counts/bin
[Fri Jul 12 02:44:33 2013] Setting source spectrum file to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jul 12 02:44:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jul 12 03:22:53 2013] Not generating rmf since there are only 69 counts
[Fri Jul 12 03:22:53 2013] rmf not generated due to insufficient counts
[Fri Jul 12 03:25:38 2013] Updating aperture counts using extracted products
[Fri Jul 12 03:25:38 2013] Total counts from fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 83.00
[Fri Jul 12 03:25:38 2013] Total counts from fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src11_bgd.pi.gz = 86.00
[Fri Jul 12 03:25:38 2013] Got source and background scale factors 131200.000000, 618260.000000
[Fri Jul 12 03:25:38 2013] User source parameters:
  Position = (300.6, 361.5) = 1 5 29.52 -24 35 32.4
  Extent = 3.4 (2.5-4.5)", rotation angle = 0
  Source aperture counts = 64.8 +/- 10.2
  Background aperture counts = 18.2
  Rate = 0.002 +/- 0.0003

[Fri Jul 12 03:25:40 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 03:25:40 2013] Using photon index=1.80, rate=0.00226, arf fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src11.arf
[Fri Jul 12 03:25:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 12 03:25:40 2013] Updating source flux to 4.8e-14
[Fri Jul 12 03:25:45 2013] Flag p found in src. 11 procflags, skipping spectral fitting
[Fri Jul 12 03:25:45 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 12 03:25:49 2013] xmm0693010501/analysis//spectral/fullrun_mos2_xmm0693010501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete