[Thu Jul 11 17:13:59 2013] Detection parameters:
  Position = (300.6, 361.2) = 1 5 29.51 -24 35 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.9 +/- 14.1
  Background counts = 27.1
  Rate = 0.005 +/- 0.0006

[Thu Jul 11 17:14:00 2013] Off-axis axis estimate = 4.55'
[Thu Jul 11 18:19:59 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 18:19:59 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Thu Jul 11 18:19:59 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.999
[Thu Jul 11 18:19:59 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.70"
[Thu Jul 11 19:52:27 2013] fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_src19.ximg exists
[Thu Jul 11 19:52:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_src19.csv
[Thu Jul 11 19:52:27 2013] fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Jul 11 19:52:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_src19.csv
[Thu Jul 11 19:52:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 19:52:27 2013] fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Jul 11 19:52:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Jul 11 19:52:27 2013] fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Jul 11 19:52:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Jul 11 19:52:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693010501_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 21:30:48 2013] Warning, spatial fit 19 centroid is now closest to src. 13
[Thu Jul 11 21:30:48 2013] Vigneting correction estimate = 1.000000
[Thu Jul 11 21:30:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 11 21:30:48 2013] Assessing source extent using major
[Thu Jul 11 21:30:48 2013] Source does appear to be extended
[Thu Jul 11 21:30:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 11 22:26:33 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 22:26:33 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Thu Jul 11 22:26:33 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.999
[Thu Jul 11 22:26:33 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 8.70"
[Thu Jul 11 23:43:13 2013] fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jul 11 23:43:13 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_src16.csv
[Thu Jul 11 23:43:13 2013] fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jul 11 23:43:13 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_src16.csv
[Thu Jul 11 23:43:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 23:43:14 2013] fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jul 11 23:43:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jul 11 23:43:14 2013] fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jul 11 23:43:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jul 11 23:43:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0693010501_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:51:49 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.492415 pixels away
[Fri Jul 12 00:51:49 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 00:51:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 00:51:49 2013] Assessing source extent using major
[Fri Jul 12 00:51:49 2013] Source does appear to be extended
[Fri Jul 12 00:51:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 01:52:20 2013] XMMSAS src. selection expression = ellipse(26106.318390, 31375.016937, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 12 01:52:20 2013] Writing source region out to fullrun_mos1_xmm0693010501_pi300-10000_pass1_cl_src11_src.reg
[Fri Jul 12 01:52:20 2013] Extracting stamp from image fullrun_mos1_xmm0693010501_pi300-10000_cl_sm2.00.img.gz, (263, 324) - (338, 399)
[Fri Jul 12 01:52:20 2013] XMMSAS bgd. selection expression = annulus(26106.318390, 31375.016937, 1087.500000, 2175.000000, X, Y) && !ellipse(24760.638000, 28366.996000, 1782.328051, 1782.328051, 0.000000, X, Y) && !ellipse(24544.574000, 28981.574000, 1273.848037, 1273.848037, 0.000000, X, Y) && !ellipse(25304.908000, 29540.588000, 1297.992037, 1297.992037, 0.000000, X, Y) && !ellipse(25576.167450, 29942.525085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.800873, 29075.878387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23683.956000, 29744.332000, 1276.136037, 1276.136037, 0.000000, X, Y)
[Fri Jul 12 01:52:20 2013] Writing fullrun_mos1_xmm0693010501_pi300-10000_pass1_cl_src11.gif
[Fri Jul 12 01:54:34 2013] Mean detx,y = (-6081.65, 1348.74) 
[Fri Jul 12 01:54:35 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 12 01:54:44 2013] Binned source spectrum to 10 counts/bin
[Fri Jul 12 01:54:45 2013] Setting source spectrum file to fullrun_mos1_xmm0693010501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jul 12 01:54:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0693010501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jul 12 02:34:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 12 02:34:51 2013] rmf not generated due to insufficient counts
[Fri Jul 12 03:25:35 2013] Updating aperture counts using extracted products
[Fri Jul 12 03:25:35 2013] Total counts from fullrun_mos1_xmm0693010501_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 238.00
[Fri Jul 12 03:25:35 2013] Total counts from fullrun_mos1_xmm0693010501_pi300-10000_pass1_cl_src11_bgd.pi.gz = 405.00
[Fri Jul 12 03:25:35 2013] Got source and background scale factors 1020230.000000, 2976075.000000
[Fri Jul 12 03:25:35 2013] User source parameters:
  Position = (300.6, 361.2) = 1 5 29.51 -24 35 32.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 99.2 +/- 16.5
  Background aperture counts = 138.8
  Rate = 0.003 +/- 0.0005

[Fri Jul 12 03:25:35 2013] Updating counts from extracted products
[Fri Jul 12 03:25:35 2013] Set source signif. to 99.16/11.78 = 8.42
[Fri Jul 12 03:25:37 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 03:25:37 2013] Using photon index=1.80, rate=0.00321, arf fullrun_mos1_xmm0693010501_pi300-10000_pass1_cl_src11.arf
[Fri Jul 12 03:25:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 12 03:25:37 2013] Updating source flux to 4.1e-14
[Fri Jul 12 03:25:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 12 03:25:45 2013] xmm0693010501/analysis//spectral/fullrun_mos1_xmm0693010501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete