[Thu Jul  4 20:56:17 2013] Detection parameters:
  Position = (301.6, 350.7) = 12 19 45.80 -3 14 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5048.3 +/- 84.9
  Background counts = 52.1
  Rate = 0.1 +/- 0.002

[Thu Jul  4 20:56:17 2013] Off-axis axis estimate = 3.79'
[Thu Jul  4 21:53:38 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 21:53:38 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Thu Jul  4 21:53:38 2013] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.030
[Thu Jul  4 21:53:38 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.33"
[Thu Jul  4 22:23:30 2013] fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  4 22:23:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_src1.csv
[Thu Jul  4 22:23:30 2013] fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  4 22:23:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_src1.csv
[Thu Jul  4 22:23:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 22:23:30 2013] fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  4 22:23:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jul  4 22:23:30 2013] fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  4 22:23:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jul  4 22:23:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 22:23:40 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.441958 pixels away
[Thu Jul  4 22:23:40 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 22:23:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 22:23:40 2013] Assessing source extent using major
[Thu Jul  4 22:23:40 2013] Source does appear to be extended
[Thu Jul  4 22:23:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 23:17:34 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 23:17:34 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Thu Jul  4 23:17:34 2013] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.030
[Thu Jul  4 23:17:34 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.33"
[Thu Jul  4 23:44:08 2013] fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  4 23:44:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_src1.csv
[Thu Jul  4 23:44:08 2013] fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  4 23:44:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_src1.csv
[Thu Jul  4 23:44:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 23:44:08 2013] fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  4 23:44:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jul  4 23:44:08 2013] fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  4 23:44:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jul  4 23:44:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 23:44:17 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.441958 pixels away
[Thu Jul  4 23:44:17 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 23:44:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 23:44:17 2013] Assessing source extent using major
[Thu Jul  4 23:44:17 2013] Source does appear to be extended
[Thu Jul  4 23:44:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  5 00:36:30 2013] Counts = 5048.347656, rescaling region sizes by 2.000000
[Fri Jul  5 00:36:30 2013] XMMSAS src. selection expression = ellipse(26187.413605, 30460.494751, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jul  5 00:36:30 2013] Writing source region out to fullrun_mos2_xmm0693010401_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul  5 00:36:30 2013] Extracting stamp from image fullrun_mos2_xmm0693010401_pi300-10000_cl_sm2.00.img.gz, (227, 276) - (377, 426)
[Fri Jul  5 00:36:30 2013] XMMSAS bgd. selection expression = annulus(26187.413605, 30460.494751, 4350.000000, 8700.000000, X, Y) && !ellipse(28672.365020, 25498.419400, 1213.528035, 890.816026, 70.980300, X, Y) && !ellipse(21301.989777, 33531.529968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31941.727000, 24920.820400, 411.455212, 411.455212, 0.000000, X, Y) && !ellipse(29508.271149, 24582.700623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25821.066000, 29291.524000, 383.626411, 303.001609, 329.764400, X, Y) && !ellipse(21276.935760, 35769.625800, 454.820013, 219.284806, 345.914468, X, Y) && !ellipse(25665.737518, 37687.120758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23080.474426, 22793.431244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30830.109020, 30236.269600, 243.392007, 243.392007, 0.000000, X, Y) && !ellipse(34852.998680, 23649.180600, 597.805617, 206.669606, 60.272100, X, Y) && !ellipse(35012.940735, 23076.839691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33993.782000, 28634.243400, 466.394413, 466.394413, 0.000000, X, Y) && !ellipse(29232.310059, 23821.174500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21830.841080, 32534.516022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.115875, 28840.342773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21670.551651, 26643.486572, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  5 00:36:30 2013] Writing fullrun_mos2_xmm0693010401_pi300-10000_pass1_cl_src2.gif
[Fri Jul  5 00:36:34 2013] Mean detx,y = (59.23, 2723.56) 
[Fri Jul  5 00:36:35 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  5 00:38:08 2013] Binned source spectrum to 10 counts/bin
[Fri Jul  5 00:38:08 2013] Setting source spectrum file to fullrun_mos2_xmm0693010401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  5 00:38:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693010401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul  5 00:45:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  5 00:45:31 2013] rmf not generated due to insufficient counts
[Fri Jul  5 00:57:43 2013] Updating aperture counts using extracted products
[Fri Jul  5 00:57:43 2013] Total counts from fullrun_mos2_xmm0693010401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 5837.00
[Fri Jul  5 00:57:43 2013] Total counts from fullrun_mos2_xmm0693010401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 31975.00
[Fri Jul  5 00:57:43 2013] Got source and background scale factors 4869412.000000, 149274154.000000
[Fri Jul  5 00:57:43 2013] User source parameters:
  Position = (301.6, 350.7) = 12 19 45.80 -3 14 25.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 4794.0 +/- 77.4
  Background aperture counts = 1043.0
  Rate = 0.1 +/- 0.002

[Fri Jul  5 00:57:43 2013] Updating counts from extracted products
[Fri Jul  5 00:57:43 2013] Set source signif. to 4793.96/32.30 = 148.44
[Fri Jul  5 00:57:46 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul  5 00:57:46 2013] Using photon index=1.80, rate=0.12, arf fullrun_mos2_xmm0693010401_pi300-10000_pass1_cl_src2.arf
[Fri Jul  5 00:57:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  5 00:57:46 2013] Updating source flux to 1.2e-12
[Fri Jul  5 00:57:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul  5 00:57:53 2013] xmm0693010401/analysis//spectral/fullrun_mos2_xmm0693010401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete