[Sun Jun 30 10:36:38 2013] Detection parameters:
  Position = (264.4, 275.8) = 0 19 41.53 3 36 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 973.0 +/- 40.3
  Background counts = 183.5
  Rate = 0.03 +/- 0.001

[Sun Jun 30 10:36:38 2013] Off-axis axis estimate = 2.96'
[Sun Jun 30 10:39:04 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 10:39:04 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Sun Jun 30 10:39:04 2013] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.698
[Sun Jun 30 10:39:04 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.91"
[Sun Jun 30 11:34:46 2013] fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_src30.ximg exists
[Sun Jun 30 11:34:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_src30.csv
[Sun Jun 30 11:34:46 2013] fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Jun 30 11:34:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_src30.csv
[Sun Jun 30 11:34:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 11:34:47 2013] fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Jun 30 11:34:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Jun 30 11:34:47 2013] fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Jun 30 11:34:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Jun 30 11:34:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 13:12:22 2013] Spatial fit model total counts = 8764.160000, observed total counts = 5555.000000
[Sun Jun 30 13:12:22 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 30 13:12:22 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 13:12:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 13:12:22 2013] Assessing source extent using major
[Sun Jun 30 13:12:22 2013] Source does appear to be extended
[Sun Jun 30 13:12:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 13:12:42 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 13:12:42 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Sun Jun 30 13:12:42 2013] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.698
[Sun Jun 30 13:12:42 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 7.91"
[Sun Jun 30 14:12:31 2013] fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_src29.ximg exists
[Sun Jun 30 14:12:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_src29.csv
[Sun Jun 30 14:12:31 2013] fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Jun 30 14:12:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_src29.csv
[Sun Jun 30 14:12:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 14:12:31 2013] fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Jun 30 14:12:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun Jun 30 14:12:31 2013] fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Jun 30 14:12:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun Jun 30 14:12:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 15:25:42 2013] Spatial fit model total counts = 8819.660000, observed total counts = 5555.000000
[Sun Jun 30 15:25:42 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 30 15:25:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 15:25:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 15:25:42 2013] Assessing source extent using major
[Sun Jun 30 15:25:42 2013] Source does appear to be extended
[Sun Jun 30 15:25:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 15:25:59 2013] XMMSAS src. selection expression = ellipse(22955.966827, 23950.118652, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 30 15:25:59 2013] Writing source region out to fullrun_pn_xmm0693010301_pi300-10000_pass1_cl_src31_src.reg
[Sun Jun 30 15:25:59 2013] Extracting stamp from image fullrun_pn_xmm0693010301_pi300-10000_cl_sm2.00.img.gz, (227, 238) - (302, 313)
[Sun Jun 30 15:25:59 2013] XMMSAS bgd. selection expression = annulus(22955.966827, 23950.118652, 1087.500000, 2175.000000, X, Y) && !ellipse(24394.524000, 23371.594000, 1252.184036, 1252.184036, 0.000000, X, Y) && !ellipse(24067.104553, 24338.509613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25584.186000, 27218.934000, 2177.296063, 2177.296063, 0.000000, X, Y) && !ellipse(24784.380000, 26116.176000, 1088.648031, 1088.648031, 0.000000, X, Y) && !ellipse(21669.274582, 25259.820709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25040.467499, 22677.406464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25250.267914, 21879.631226, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 30 15:25:59 2013] Writing fullrun_pn_xmm0693010301_pi300-10000_pass1_cl_src31.gif
[Sun Jun 30 15:47:02 2013] Mean detx,y = (825.75, -1492.22) 
[Sun Jun 30 15:47:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 30 15:47:15 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 30 15:47:15 2013] Setting source spectrum file to fullrun_pn_xmm0693010301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Jun 30 15:47:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693010301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Jun 30 16:54:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 30 16:54:07 2013] rmf not generated due to insufficient counts
[Sun Jun 30 19:01:05 2013] Updating aperture counts using extracted products
[Sun Jun 30 19:01:05 2013] Total counts from fullrun_pn_xmm0693010301_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 3580.00
[Sun Jun 30 19:01:05 2013] Total counts from fullrun_pn_xmm0693010301_pi300-10000_pass1_cl_src31_bgd.pi.gz = 9207.00
[Sun Jun 30 19:01:05 2013] Got source and background scale factors 880769.000000, 5400435.000000
[Sun Jun 30 19:01:05 2013] User source parameters:
  Position = (264.4, 275.8) = 0 19 41.53 3 36 8.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2078.4 +/- 60.8
  Background aperture counts = 1501.6
  Rate = 0.05 +/- 0.002

[Sun Jun 30 19:01:05 2013] Updating counts from extracted products
[Sun Jun 30 19:01:05 2013] Set source signif. to 2078.41/38.75 = 53.64
[Sun Jun 30 19:01:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 19:01:08 2013] Using photon index=1.80, rate=0.0514, arf fullrun_pn_xmm0693010301_pi300-10000_pass1_cl_src31.arf
[Sun Jun 30 19:01:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 19:01:08 2013] Updating source flux to 1.6e-13
[Sun Jun 30 19:01:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 30 19:01:27 2013] xmm0693010301/analysis//spectral/fullrun_pn_xmm0693010301_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete