[Sun Jun 30 10:37:14 2013] Detection parameters:
  Position = (264.5, 278.3) = 0 19 41.51 3 36 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 347.8 +/- 25.7
  Background counts = 55.0
  Rate = 0.008 +/- 0.0006

[Sun Jun 30 10:37:15 2013] Off-axis axis estimate = 2.86'
[Sun Jun 30 12:25:23 2013] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 12:25:23 2013] Initial guess for spatial extent in simple fitting = 7.86"
[Sun Jun 30 12:25:23 2013] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.987
[Sun Jun 30 12:25:23 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.86"
[Sun Jun 30 13:12:15 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jun 30 13:12:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src7.csv
[Sun Jun 30 13:12:15 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jun 30 13:12:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src7.csv
[Sun Jun 30 13:12:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 13:12:15 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jun 30 13:12:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Jun 30 13:12:15 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jun 30 13:12:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Jun 30 13:12:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 13:12:31 2013] Source 11 is offset by -5.833017 and 2.988041 pixels which is larger than
2 X fitted extent = 2.443770 x 7.227448, not incorporating fit results
[Sun Jun 30 13:12:31 2013] Source 11 is offset by 5.966432 and -5.205384 pixels which is larger than
2 X fitted extent = 0.940970 x 0.940970, not incorporating fit results
[Sun Jun 30 13:12:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 13:12:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 13:12:32 2013] Assessing source extent using major
[Sun Jun 30 13:12:32 2013] Source does appear to be extended
[Sun Jun 30 13:12:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 14:53:18 2013] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 14:53:18 2013] Initial guess for spatial extent in simple fitting = 7.86"
[Sun Jun 30 14:53:18 2013] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.987
[Sun Jun 30 14:53:18 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.86"
[Sun Jun 30 15:25:36 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src7.ximg exists
[Sun Jun 30 15:25:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src7.csv
[Sun Jun 30 15:25:36 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Jun 30 15:25:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src7.csv
[Sun Jun 30 15:25:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 15:25:36 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Jun 30 15:25:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Jun 30 15:25:36 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Jun 30 15:25:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Jun 30 15:25:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 15:25:49 2013] Source 11 is offset by -6.077477 and 4.723788 pixels which is larger than
2 X fitted extent = 7.227448 x 1.875793, not incorporating fit results
[Sun Jun 30 15:25:49 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 15:25:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 15:25:49 2013] Assessing source extent using major
[Sun Jun 30 15:25:49 2013] Source does appear to be extended
[Sun Jun 30 15:25:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 18:10:58 2013] XMMSAS src. selection expression = ellipse(22962.495544, 24160.715576, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 30 18:10:58 2013] Writing source region out to fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 30 18:10:58 2013] Extracting stamp from image fullrun_mos2_xmm0693010301_pi300-10000_cl_sm2.00.img.gz, (227, 241) - (302, 316)
[Sun Jun 30 18:10:58 2013] XMMSAS bgd. selection expression = annulus(22962.495544, 24160.715576, 1087.500000, 2175.000000, X, Y) && !ellipse(23995.264800, 24000.104000, 1204.912035, 1204.912035, 0.000000, X, Y) && !ellipse(23483.959229, 25458.674438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23259.550842, 24855.053528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.436584, 23940.146362, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25297.789000, 21792.969600, 417.514412, 417.514412, 0.000000, X, Y) && !ellipse(21760.089859, 25186.353394, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 30 18:10:58 2013] Writing fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src11.gif
[Sun Jun 30 18:15:31 2013] Mean detx,y = (-713.64, 1097.18) 
[Sun Jun 30 18:15:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 30 18:15:37 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 30 18:15:37 2013] Setting source spectrum file to fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 30 18:15:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 30 18:45:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 30 18:45:23 2013] rmf not generated due to insufficient counts
[Sun Jun 30 19:01:12 2013] Updating aperture counts using extracted products
[Sun Jun 30 19:01:12 2013] Total counts from fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 2040.00
[Sun Jun 30 19:01:12 2013] Total counts from fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src11_bgd.pi.gz = 2028.00
[Sun Jun 30 19:01:12 2013] Got source and background scale factors 1140020.000000, 4592148.000000
[Sun Jun 30 19:01:12 2013] User source parameters:
  Position = (264.5, 278.3) = 0 19 41.51 3 36 14.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1536.5 +/- 46.2
  Background aperture counts = 503.5
  Rate = 0.03 +/- 0.001

[Sun Jun 30 19:01:12 2013] Updating counts from extracted products
[Sun Jun 30 19:01:12 2013] Set source signif. to 1536.54/22.44 = 68.48
[Sun Jun 30 19:01:14 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 19:01:14 2013] Using photon index=1.80, rate=0.0325, arf fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src11.arf
[Sun Jun 30 19:01:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 19:01:14 2013] Updating source flux to 3.4e-13
[Sun Jun 30 19:01:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 30 19:01:23 2013] xmm0693010301/analysis//spectral/fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete