[Sun Jun 30 10:37:14 2013] Detection parameters:
  Position = (106.1, 249.1) = 0 20 27.54 3 34 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2578.1 +/- 62.0
  Background counts = 21.0
  Rate = 0.05 +/- 0.001

[Sun Jun 30 10:37:15 2013] Off-axis axis estimate = 14.40'
[Sun Jun 30 12:25:23 2013] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 12:25:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 30 12:25:23 2013] Initial guess for spatial extent in simple fitting = 13.63"
[Sun Jun 30 12:25:23 2013] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.212
[Sun Jun 30 12:25:23 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 13.63"
[Sun Jun 30 13:12:15 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun 30 13:12:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src2.csv
[Sun Jun 30 13:12:15 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun 30 13:12:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src2.csv
[Sun Jun 30 13:12:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 13:12:15 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun 30 13:12:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 30 13:12:15 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun 30 13:12:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 30 13:12:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 13:12:31 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.042571 pixels away
[Sun Jun 30 13:12:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 13:12:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 13:12:32 2013] Assessing source extent using major
[Sun Jun 30 13:12:32 2013] Source does appear to be extended
[Sun Jun 30 13:12:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 14:53:18 2013] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 14:53:18 2013] Initial guess for spatial extent in simple fitting = 13.63"
[Sun Jun 30 14:53:18 2013] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.212
[Sun Jun 30 14:53:18 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 13.63"
[Sun Jun 30 15:25:36 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 30 15:25:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src2.csv
[Sun Jun 30 15:25:36 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 30 15:25:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src2.csv
[Sun Jun 30 15:25:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 15:25:36 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 30 15:25:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 30 15:25:36 2013] fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 30 15:25:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 30 15:25:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0693010301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 15:25:49 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.042571 pixels away
[Sun Jun 30 15:25:49 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 15:25:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 15:25:49 2013] Assessing source extent using major
[Sun Jun 30 15:25:49 2013] Source does appear to be extended
[Sun Jun 30 15:25:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 18:10:57 2013] Counts = 2578.064941, rescaling region sizes by 2.000000
[Sun Jun 30 18:10:57 2013] XMMSAS src. selection expression = ellipse(9179.499702, 21623.898804, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 30 18:10:57 2013] Writing source region out to fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 30 18:10:57 2013] Extracting stamp from image fullrun_mos2_xmm0693010301_pi300-10000_cl_sm2.00.img.gz, (31, 174) - (181, 324)
[Sun Jun 30 18:10:57 2013] XMMSAS bgd. selection expression = annulus(9179.499702, 21623.898804, 4350.000000, 8700.000000, X, Y) && !ellipse(16886.466309, 24993.019470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16313.638428, 30732.067078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16182.957886, 22478.733276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11426.033493, 26655.622711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18393.799454, 22120.312286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16903.163200, 14301.335540, 962.152028, 512.277615, 26.161882, X, Y)
[Sun Jun 30 18:10:57 2013] Writing fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src1.gif
[Sun Jun 30 18:13:51 2013] Mean detx,y = (-12432.75, 8908.75) 
[Sun Jun 30 18:13:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 30 18:14:47 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 30 18:14:47 2013] Setting source spectrum file to fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 30 18:14:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 30 18:44:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 30 18:44:43 2013] rmf not generated due to insufficient counts
[Sun Jun 30 19:01:11 2013] Updating aperture counts using extracted products
[Sun Jun 30 19:01:11 2013] Total counts from fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2678.00
[Sun Jun 30 19:01:11 2013] Total counts from fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 8636.00
[Sun Jun 30 19:01:11 2013] Got source and background scale factors 4325904.000000, 79715748.000000
[Sun Jun 30 19:01:11 2013] User source parameters:
  Position = (106.1, 249.1) = 0 20 27.54 3 34 10.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2209.4 +/- 52.8
  Background aperture counts = 468.6
  Rate = 0.05 +/- 0.001

[Sun Jun 30 19:01:11 2013] Updating counts from extracted products
[Sun Jun 30 19:01:11 2013] Set source signif. to 2209.35/21.65 = 102.06
[Sun Jun 30 19:01:14 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 19:01:14 2013] Using photon index=1.80, rate=0.0468, arf fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src1.arf
[Sun Jun 30 19:01:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 19:01:14 2013] Updating source flux to 1.1e-12
[Sun Jun 30 19:01:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 30 19:01:23 2013] xmm0693010301/analysis//spectral/fullrun_mos2_xmm0693010301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete