[Wed Jun 26 16:20:31 2013] Detection parameters:
  Position = (281.9, 307.4) = 2 54 20.29 -60 51 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.4 +/- 11.8
  Background counts = 25.9
  Rate = 0.002 +/- 0.0005

[Wed Jun 26 16:20:31 2013] Off-axis axis estimate = 1.37'
[Wed Jun 26 17:21:38 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 17:21:38 2013] Initial guess for spatial extent in simple fitting = 7.11"
[Wed Jun 26 17:21:38 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.097
[Wed Jun 26 17:21:38 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.11"
[Wed Jun 26 17:42:26 2013] fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jun 26 17:42:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_src14.csv
[Wed Jun 26 17:42:26 2013] fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jun 26 17:42:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_src14.csv
[Wed Jun 26 17:42:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 17:42:27 2013] fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jun 26 17:42:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Jun 26 17:42:27 2013] fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jun 26 17:42:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Jun 26 17:42:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0692900201_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 17:42:39 2013] Spatial fit model total counts = 401.421000, observed total counts = 355.000000
[Wed Jun 26 17:42:39 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 26 17:42:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 17:42:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 17:42:39 2013] Assessing source extent using major
[Wed Jun 26 17:42:39 2013] Source does appear to be extended
[Wed Jun 26 17:42:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 18:35:35 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 18:35:35 2013] Initial guess for spatial extent in simple fitting = 7.11"
[Wed Jun 26 18:35:35 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.097
[Wed Jun 26 18:35:35 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 7.11"
[Wed Jun 26 18:57:36 2013] fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_src14.ximg exists
[Wed Jun 26 18:57:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_src14.csv
[Wed Jun 26 18:57:36 2013] fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Jun 26 18:57:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_src14.csv
[Wed Jun 26 18:57:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 18:57:37 2013] fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Jun 26 18:57:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Jun 26 18:57:37 2013] fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Jun 26 18:57:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Jun 26 18:57:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0692900201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 18:57:44 2013] Source 7 is offset by -5.187028 and -1.631852 pixels which is larger than
2 X fitted extent = 1.257458 x 1.257458, not incorporating fit results
[Wed Jun 26 18:57:44 2013] Spatial fit model total counts = 420.832000, observed total counts = 355.000000
[Wed Jun 26 18:57:44 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 26 18:57:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 18:57:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 18:57:44 2013] Assessing source extent using major
[Wed Jun 26 18:57:44 2013] Source does appear to be extended
[Wed Jun 26 18:57:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 19:43:28 2013] XMMSAS src. selection expression = ellipse(24474.420563, 26697.720856, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 26 19:43:28 2013] Writing source region out to fullrun_mos2_xmm0692900201_pi300-10000_pass1_cl_src7_src.reg
[Wed Jun 26 19:43:28 2013] Extracting stamp from image fullrun_mos2_xmm0692900201_pi300-10000_cl_sm2.00.img.gz, (244, 270) - (319, 345)
[Wed Jun 26 19:43:28 2013] XMMSAS bgd. selection expression = annulus(24474.420563, 26697.720856, 1087.500000, 2175.000000, X, Y) && !ellipse(24673.703880, 25765.155800, 943.784027, 943.784027, 0.000000, X, Y) && !ellipse(23550.927032, 26430.773590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24041.954600, 25881.068600, 875.192025, 875.192025, 0.000000, X, Y) && !ellipse(22672.845123, 25843.024445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23912.045532, 28261.886230, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 26 19:43:28 2013] Writing fullrun_mos2_xmm0692900201_pi300-10000_pass1_cl_src7.gif
[Wed Jun 26 19:46:56 2013] Mean detx,y = (-27.53, -611.53) 
[Wed Jun 26 19:46:57 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 26 19:47:04 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 26 19:47:04 2013] Setting source spectrum file to fullrun_mos2_xmm0692900201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jun 26 19:47:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0692900201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jun 26 19:55:32 2013] Not generating rmf since there are only 52 counts
[Wed Jun 26 19:55:32 2013] rmf not generated due to insufficient counts
[Wed Jun 26 19:56:29 2013] Updating aperture counts using extracted products
[Wed Jun 26 19:56:29 2013] Total counts from fullrun_mos2_xmm0692900201_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 241.00
[Wed Jun 26 19:56:29 2013] Total counts from fullrun_mos2_xmm0692900201_pi300-10000_pass1_cl_src7_bgd.pi.gz = 663.00
[Wed Jun 26 19:56:29 2013] Got source and background scale factors 1193892.000000, 5689048.000000
[Wed Jun 26 19:56:29 2013] User source parameters:
  Position = (281.9, 307.4) = 2 54 20.29 -60 51 27.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 101.9 +/- 16.5
  Background aperture counts = 139.1
  Rate = 0.004 +/- 0.0007

[Wed Jun 26 19:56:29 2013] Updating counts from extracted products
[Wed Jun 26 19:56:29 2013] Set source signif. to 101.86/11.80 = 8.64
[Wed Jun 26 19:56:30 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 26 19:56:30 2013] Using photon index=1.80, rate=0.00413, arf fullrun_mos2_xmm0692900201_pi300-10000_pass1_cl_src7.arf
[Wed Jun 26 19:56:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 26 19:56:30 2013] Updating source flux to 4.5e-14
[Wed Jun 26 19:56:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 26 19:56:35 2013] xmm0692900201/analysis//spectral/fullrun_mos2_xmm0692900201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete