[Tue Jul  9 12:39:36 2013] Detection parameters:
  Position = (211.8, 355.1) = 10 37 17.52 -67 19 49.6
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 15.4 +/- 6.5
  Background counts = 59.1
  Rate = 0.0006 +/- 0.0003

[Tue Jul  9 12:39:36 2013] Off-axis axis estimate = 7.50'
[Tue Jul  9 13:02:49 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Tue Jul  9 13:02:49 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Tue Jul  9 13:02:49 2013] source mask rpix=2.3, npix_max = 32, mask sum = 20, frac = 0.620
[Tue Jul  9 13:02:49 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.18"
[Tue Jul  9 13:11:27 2013] fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jul  9 13:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_src11.csv
[Tue Jul  9 13:11:27 2013] fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jul  9 13:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_src11.csv
[Tue Jul  9 13:11:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  9 13:11:27 2013] fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jul  9 13:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jul  9 13:11:27 2013] fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jul  9 13:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jul  9 13:11:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0692830201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  9 13:11:33 2013] Source 10 is offset by 1.638840 and 3.842200 pixels which is larger than
2 X fitted extent = 1.170189 x 2.122441, not incorporating fit results
[Tue Jul  9 13:11:33 2013] Vigneting correction estimate = 1.000000
[Tue Jul  9 13:11:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  9 13:11:33 2013] Assessing source extent using major
[Tue Jul  9 13:11:33 2013] Source does appear to be extended
[Tue Jul  9 13:11:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  9 13:11:33 2013] Deleting source due to low Poisson probability 0.9