[Sun Aug  4 17:32:27 2013] Detection parameters:
  Position = (188.5, 238.0) = 20 20 5.06 38 40 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.3 +/- 11.7
  Background counts = 24.3
  Rate = 0.01 +/- 0.002

[Sun Aug  4 17:32:27 2013] Off-axis axis estimate = 9.10'
[Sun Aug  4 17:33:37 2013] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Sun Aug  4 17:33:37 2013] Initial guess for spatial extent in simple fitting = 10.98"
[Sun Aug  4 17:33:37 2013] source mask rpix=2.5, npix_max = 36, mask sum = 41, frac = 1.121
[Sun Aug  4 17:33:37 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.98"
[Sun Aug  4 18:01:28 2013] fullrun_pn_xmm0692810501_pi300-10000_cl_pass0_src28.ximg exists
[Sun Aug  4 18:01:28 2013] fullrun_pn_xmm0692810501_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Aug  4 18:01:28 2013] Fit fullrun_pn_xmm0692810501_pi300-10000_cl_pass0_src28 appears to have run properly
[Sun Aug  4 18:01:28 2013] fullrun_pn_xmm0692810501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Aug  4 18:01:28 2013] fullrun_pn_xmm0692810501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Aug  4 18:01:28 2013] Fit fullrun_pn_xmm0692810501_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Aug  4 18:29:04 2013] Spatial fit model total counts = 293.718000, observed total counts = 270.000000
[Sun Aug  4 18:29:04 2013] Offset between fit and detection position for source 28 = 0.202873 pixels
[Sun Aug  4 18:29:04 2013] 297.092500 total counts/ 258.141000 bgd. counts: snr = 2.424352
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.202873 pixels
  Position = (188.6, 237.8) = 20 20 5.03 38 40 7.3
  Extent = 4.2 (3.0-7.3)", rotation angle = 0
  Source counts = 39.0 +/- 17.2
  Background counts = 258.1
  Rate = 0.003 +/- 0.001
[Sun Aug  4 18:29:04 2013] Vigneting correction estimate = 1.000000
[Sun Aug  4 18:29:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  4 18:29:04 2013] Assessing source extent using major axis lower bound
[Sun Aug  4 18:29:04 2013] Source does appear to be extended
[Sun Aug  4 18:29:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  4 18:29:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  4 18:29:15 2013] Initial guess for spatial extent in simple fitting = 4.23"
[Sun Aug  4 18:29:15 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.038
[Sun Aug  4 18:29:15 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 4.23"
[Sun Aug  4 18:57:35 2013] fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_src28.ximg exists
[Sun Aug  4 18:57:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_src28.csv
[Sun Aug  4 18:57:35 2013] fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Aug  4 18:57:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_src28.csv
[Sun Aug  4 18:57:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  4 18:57:35 2013] fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Aug  4 18:57:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Aug  4 18:57:35 2013] fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Aug  4 18:57:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Aug  4 18:57:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0692810501_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  4 19:19:36 2013] Warning, spatial fit 28 centroid is now closest to src. 25
[Sun Aug  4 19:19:36 2013] Vigneting correction estimate = 1.000000
[Sun Aug  4 19:19:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  4 19:19:36 2013] Assessing source extent using major axis lower bound
[Sun Aug  4 19:19:36 2013] Source does appear to be extended
[Sun Aug  4 19:19:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  4 19:19:46 2013] XMMSAS src. selection expression = ellipse(16357.692200, 20638.782800, 253.773607, 253.773607, 0.000000, X, Y)
[Sun Aug  4 19:19:46 2013] Writing source region out to fullrun_pn_xmm0692810501_pi300-10000_pass1_cl_src28_src.reg
[Sun Aug  4 19:19:46 2013] Extracting stamp from image fullrun_pn_xmm0692810501_pi300-10000_cl_sm2.00.img.gz, (174, 223) - (203, 252)
[Sun Aug  4 19:19:46 2013] XMMSAS bgd. selection expression = annulus(16357.692200, 20638.782800, 422.956012, 845.912024, X, Y)
[Sun Aug  4 19:19:46 2013] Writing fullrun_pn_xmm0692810501_pi300-10000_pass1_cl_src28.gif
[Sun Aug  4 19:29:16 2013] Mean detx,y = (3681.76, -8361.78) 
[Sun Aug  4 19:29:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  4 19:29:27 2013] Binned source spectrum to 10 counts/bin
[Sun Aug  4 19:29:27 2013] Setting source spectrum file to fullrun_pn_xmm0692810501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Aug  4 19:29:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0692810501_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Aug  4 19:38:40 2013] Not generating rmf since there are only 38 counts
[Sun Aug  4 19:38:40 2013] rmf not generated due to insufficient counts
[Sun Aug  4 19:50:38 2013] Updating aperture counts using extracted products
[Sun Aug  4 19:50:38 2013] Total counts from fullrun_pn_xmm0692810501_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 67.00
[Sun Aug  4 19:50:38 2013] Total counts from fullrun_pn_xmm0692810501_pi300-10000_pass1_cl_src28_bgd.pi.gz = 162.00
[Sun Aug  4 19:50:38 2013] Got source and background scale factors 206400.000000, 1360785.000000
[Sun Aug  4 19:50:38 2013] User source parameters:
  Position = (188.6, 237.8) = 20 20 5.03 38 40 7.3
  Extent = 4.2 (3.0-7.3)", rotation angle = 0
  Source aperture counts = 42.4 +/- 9.2
  Background aperture counts = 24.6
  Rate = 0.004 +/- 0.0008

[Sun Aug  4 19:50:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Aug  4 19:50:38 2013] Using photon index=1.80, rate=0.00331, arf fullrun_pn_xmm0692810501_pi300-10000_pass1_cl_src28.arf
[Sun Aug  4 19:50:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  4 19:50:38 2013] Updating source flux to 4.9e-14
[Sun Aug  4 19:50:46 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Aug  4 19:50:47 2013] xmm0692810501/analysis//spectral/fullrun_pn_xmm0692810501_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete