[Wed Jul 10 12:21:46 2013] Detection parameters:
  Position = (351.0, 334.6) = 12 31 18.35 1 39 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.9 +/- 16.9
  Background counts = 44.5
  Rate = 0.01 +/- 0.001

[Wed Jul 10 12:21:46 2013] Off-axis axis estimate = 4.62'
[Wed Jul 10 12:23:12 2013] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Wed Jul 10 12:23:12 2013] Initial guess for spatial extent in simple fitting = 8.74"
[Wed Jul 10 12:23:12 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993
[Wed Jul 10 12:23:12 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.74"
[Wed Jul 10 12:42:23 2013] fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_src20.ximg exists
[Wed Jul 10 12:42:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_src20.csv
[Wed Jul 10 12:42:23 2013] fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Jul 10 12:42:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_src20.csv
[Wed Jul 10 12:42:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 10 12:42:23 2013] fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Jul 10 12:42:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Jul 10 12:42:23 2013] fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Jul 10 12:42:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Jul 10 12:42:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0692510101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 10 13:14:33 2013] Source 20 is offset by 8.710141 and 4.541348 pixels which is larger than
2 X fitted extent = 1.147786 x 1.147786, not incorporating fit results
[Wed Jul 10 13:14:33 2013] Vigneting correction estimate = 1.000000
[Wed Jul 10 13:14:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 10 13:14:33 2013] Assessing source extent using major
[Wed Jul 10 13:14:33 2013] Source does appear to be extended
[Wed Jul 10 13:14:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 10 13:14:45 2013] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Wed Jul 10 13:14:45 2013] Initial guess for spatial extent in simple fitting = 8.74"
[Wed Jul 10 13:14:45 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993
[Wed Jul 10 13:14:45 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 8.74"
[Wed Jul 10 13:35:30 2013] fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_src20.ximg exists
[Wed Jul 10 13:35:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_src20.csv
[Wed Jul 10 13:35:30 2013] fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Jul 10 13:35:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_src20.csv
[Wed Jul 10 13:35:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 10 13:35:31 2013] fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Jul 10 13:35:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jul 10 13:35:31 2013] fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Jul 10 13:35:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jul 10 13:35:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0692510101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 10 14:06:05 2013] Source 20 is offset by 8.706716 and 4.540934 pixels which is larger than
2 X fitted extent = 1.147756 x 1.147756, not incorporating fit results
[Wed Jul 10 14:06:05 2013] Vigneting correction estimate = 1.000000
[Wed Jul 10 14:06:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 10 14:06:05 2013] Assessing source extent using major
[Wed Jul 10 14:06:05 2013] Source does appear to be extended
[Wed Jul 10 14:06:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 10 14:06:17 2013] XMMSAS src. selection expression = ellipse(30484.180267, 29061.833282, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 10 14:06:17 2013] Writing source region out to fullrun_pn_xmm0692510101_pi300-10000_pass1_cl_src20_src.reg
[Wed Jul 10 14:06:17 2013] Extracting stamp from image fullrun_pn_xmm0692510101_pi300-10000_cl_sm2.00.img.gz, (313, 297) - (388, 372)
[Wed Jul 10 14:06:17 2013] XMMSAS bgd. selection expression = annulus(30484.180267, 29061.833282, 1087.500000, 2175.000000, X, Y) && !ellipse(33306.433929, 29795.712585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30918.035950, 26564.133057, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 10 14:06:17 2013] Writing fullrun_pn_xmm0692510101_pi300-10000_pass1_cl_src20.gif
[Wed Jul 10 14:12:52 2013] Mean detx,y = (4343.35, 469.04) 
[Wed Jul 10 14:12:54 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 10 14:13:12 2013] Binned source spectrum to 10 counts/bin
[Wed Jul 10 14:13:12 2013] Setting source spectrum file to fullrun_pn_xmm0692510101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jul 10 14:13:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0692510101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Jul 10 14:25:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 10 14:25:50 2013] rmf not generated due to insufficient counts
[Wed Jul 10 14:44:02 2013] Updating aperture counts using extracted products
[Wed Jul 10 14:44:02 2013] Total counts from fullrun_pn_xmm0692510101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 358.00
[Wed Jul 10 14:44:02 2013] Total counts from fullrun_pn_xmm0692510101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 1588.00
[Wed Jul 10 14:44:02 2013] Got source and background scale factors 1189226.000000, 8372823.000000
[Wed Jul 10 14:44:02 2013] User source parameters:
  Position = (351.0, 334.6) = 12 31 18.35 1 39 8.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 132.4 +/- 19.9
  Background aperture counts = 225.6
  Rate = 0.008 +/- 0.001

[Wed Jul 10 14:44:02 2013] Updating counts from extracted products
[Wed Jul 10 14:44:02 2013] Set source signif. to 132.45/15.02 = 8.82
[Wed Jul 10 14:44:04 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jul 10 14:44:04 2013] Using photon index=1.80, rate=0.00795, arf fullrun_pn_xmm0692510101_pi300-10000_pass1_cl_src20.arf
[Wed Jul 10 14:44:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 10 14:44:04 2013] Updating source flux to 2.4e-14
[Wed Jul 10 14:44:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jul 10 14:44:15 2013] xmm0692510101/analysis//spectral/fullrun_pn_xmm0692510101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete