[Fri Aug  2 01:47:09 2013] Detection parameters:
  Position = (354.1, 426.0) = 13 2 41.84 -41 34 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 520.0 +/- 26.4
  Background counts = 5.2
  Rate = 0.04 +/- 0.002

[Fri Aug  2 01:47:09 2013] Off-axis axis estimate = 10.09'
[Fri Aug  2 02:07:36 2013] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Fri Aug  2 02:07:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  2 02:07:36 2013] Initial guess for spatial extent in simple fitting = 11.47"
[Fri Aug  2 02:07:36 2013] source mask rpix=2.6, npix_max = 39, mask sum = 34, frac = 0.863
[Fri Aug  2 02:07:36 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.47"
[Fri Aug  2 02:15:20 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  2 02:15:20 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  2 02:15:20 2013] Fit fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Aug  2 02:15:20 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  2 02:15:20 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  2 02:15:20 2013] Fit fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  2 02:31:27 2013] Spatial fit model total counts = 647.808000, observed total counts = 600.000000
[Fri Aug  2 02:31:27 2013] Offset between fit and detection position for source 2 = 0.698384 pixels
[Fri Aug  2 02:31:27 2013] 647.179000 total counts/ 252.761000 bgd. counts: snr = 24.808568
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.698384 pixels
  Position = (353.4, 426.0) = 13 2 42.11 -41 34 37.1
  Extent = 5.7 (5.1-6.5)" x 4.6 (4.1-5.2)", rotation angle = 36 (16-58) degrees
  Source counts = 394.4 +/- 25.4
  Background counts = 252.8
  Rate = 0.03 +/- 0.002
[Fri Aug  2 02:31:27 2013] Vigneting correction estimate = 1.000000
[Fri Aug  2 02:31:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  2 02:31:27 2013] Assessing source extent using major axis lower bound
[Fri Aug  2 02:31:27 2013] Source does appear to be extended
[Fri Aug  2 02:31:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Fri Aug  2 02:50:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  2 02:50:08 2013] Initial guess for spatial extent in simple fitting = 5.16"
[Fri Aug  2 02:50:08 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.055
[Fri Aug  2 02:50:08 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.16"
[Fri Aug  2 02:56:57 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  2 02:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_src1.csv
[Fri Aug  2 02:56:57 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  2 02:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_src1.csv
[Fri Aug  2 02:56:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  2 02:56:57 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  2 02:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug  2 02:56:57 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  2 02:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug  2 02:56:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  2 03:09:58 2013] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri Aug  2 03:09:58 2013] Vigneting correction estimate = 1.000000
[Fri Aug  2 03:09:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  2 03:09:58 2013] Assessing source extent using major axis lower bound
[Fri Aug  2 03:09:58 2013] Source does appear to be extended
[Fri Aug  2 03:09:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Fri Aug  2 03:28:22 2013] XMMSAS src. selection expression = ellipse(30693.894540, 37010.277200, 344.386810, 274.719008, 35.946966, X, Y)
[Fri Aug  2 03:28:22 2013] Writing source region out to fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug  2 03:28:22 2013] Extracting stamp from image fullrun_mos1_xmm0691250201_pi300-10000_cl_sm2.00.img.gz, (334, 406) - (373, 446)
[Fri Aug  2 03:28:22 2013] XMMSAS bgd. selection expression = annulus(30693.894540, 37010.277200, 573.978017, 1147.956033, X, Y)
[Fri Aug  2 03:28:22 2013] Writing fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src2.gif
[Fri Aug  2 03:28:23 2013] Mean detx,y = (8173.50, 5993.54) 
[Fri Aug  2 03:28:24 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  2 03:28:32 2013] Binned source spectrum to 10 counts/bin
[Fri Aug  2 03:28:32 2013] Setting source spectrum file to fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug  2 03:28:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug  2 03:42:31 2013] Updating aperture counts using extracted products
[Fri Aug  2 03:42:31 2013] Total counts from fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 406.00
[Fri Aug  2 03:42:31 2013] Total counts from fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 131.00
[Fri Aug  2 03:42:31 2013] Got source and background scale factors 210596.000000, 2520458.000000
[Fri Aug  2 03:42:31 2013] User source parameters:
  Position = (353.4, 426.0) = 13 2 42.11 -41 34 37.1
  Extent = 5.7 (5.1-6.5)" x 4.6 (4.1-5.2)", rotation angle = 36 (16-58) degrees
  Source aperture counts = 395.1 +/- 21.2
  Background aperture counts = 10.9
  Rate = 0.03 +/- 0.002

[Fri Aug  2 03:42:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri Aug  2 03:42:32 2013] Using photon index=1.80, rate=0.03, arf fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src2.arf
[Fri Aug  2 03:42:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  2 03:42:32 2013] Updating source flux to 7.1e-13
[Fri Aug  2 03:42:37 2013] xmm0691250201/analysis//spectral/fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete