[Fri Aug  2 01:47:09 2013] Detection parameters:
  Position = (264.2, 359.9) = 13 3 16.69 -41 39 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.1 +/- 12.9
  Background counts = 5.5
  Rate = 0.01 +/- 0.001

[Fri Aug  2 01:47:09 2013] Off-axis axis estimate = 5.10'
[Fri Aug  2 02:07:36 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Fri Aug  2 02:07:36 2013] Initial guess for spatial extent in simple fitting = 8.98"
[Fri Aug  2 02:07:36 2013] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.875
[Fri Aug  2 02:07:36 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.98"
[Fri Aug  2 02:15:20 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug  2 02:15:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_src2.csv
[Fri Aug  2 02:15:20 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug  2 02:15:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_src2.csv
[Fri Aug  2 02:15:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  2 02:15:20 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug  2 02:15:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Aug  2 02:15:20 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug  2 02:15:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Aug  2 02:15:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0691250201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  2 02:31:27 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.047401 pixels away
[Fri Aug  2 02:31:27 2013] Vigneting correction estimate = 1.000000
[Fri Aug  2 02:31:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  2 02:31:27 2013] Assessing source extent using major
[Fri Aug  2 02:31:27 2013] Source does appear to be extended
[Fri Aug  2 02:31:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  2 02:50:08 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Fri Aug  2 02:50:08 2013] Initial guess for spatial extent in simple fitting = 8.98"
[Fri Aug  2 02:50:08 2013] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.875
[Fri Aug  2 02:50:08 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.98"
[Fri Aug  2 02:56:57 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug  2 02:56:57 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug  2 02:56:57 2013] Fit fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Aug  2 02:56:57 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug  2 02:56:57 2013] fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug  2 02:56:57 2013] Fit fullrun_mos1_xmm0691250201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Aug  2 03:09:58 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.378049 pixels away
[Fri Aug  2 03:09:58 2013] Vigneting correction estimate = 1.000000
[Fri Aug  2 03:09:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  2 03:09:58 2013] Assessing source extent using major
[Fri Aug  2 03:09:58 2013] Source does appear to be extended
[Fri Aug  2 03:09:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  2 03:28:22 2013] XMMSAS src. selection expression = ellipse(22935.732849, 31260.147095, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug  2 03:28:22 2013] Writing source region out to fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug  2 03:28:22 2013] Extracting stamp from image fullrun_mos1_xmm0691250201_pi300-10000_cl_sm2.00.img.gz, (227, 322) - (302, 397)
[Fri Aug  2 03:28:22 2013] XMMSAS bgd. selection expression = annulus(22935.732849, 31260.147095, 1087.500000, 2175.000000, X, Y)
[Fri Aug  2 03:28:22 2013] Writing fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src1.gif
[Fri Aug  2 03:28:34 2013] Mean detx,y = (4517.71, -2922.73) 
[Fri Aug  2 03:28:34 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  2 03:28:41 2013] Binned source spectrum to 10 counts/bin
[Fri Aug  2 03:28:41 2013] Setting source spectrum file to fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  2 03:28:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug  2 03:32:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug  2 03:32:31 2013] rmf not generated due to insufficient counts
[Fri Aug  2 03:42:31 2013] Updating aperture counts using extracted products
[Fri Aug  2 03:42:31 2013] Total counts from fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 126.00
[Fri Aug  2 03:42:31 2013] Total counts from fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 369.00
[Fri Aug  2 03:42:31 2013] Got source and background scale factors 1277208.000000, 10688814.000000
[Fri Aug  2 03:42:31 2013] User source parameters:
  Position = (264.2, 359.9) = 13 3 16.69 -41 39 24.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 81.9 +/- 12.3
  Background aperture counts = 44.1
  Rate = 0.006 +/- 0.0009

[Fri Aug  2 03:42:31 2013] Updating counts from extracted products
[Fri Aug  2 03:42:31 2013] Set source signif. to 81.91/6.64 = 12.34
[Fri Aug  2 03:42:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri Aug  2 03:42:32 2013] Using photon index=1.80, rate=0.00622, arf fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src1.arf
[Fri Aug  2 03:42:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  2 03:42:32 2013] Updating source flux to 8.2e-14
[Fri Aug  2 03:42:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug  2 03:42:37 2013] xmm0691250201/analysis//spectral/fullrun_mos1_xmm0691250201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete